- 您现在的位置：买卖IC网 > Datasheet目录612 > 90757-1 (TE Connectivity)SEATING TOOL ASSY H.M. 77 PINS Datasheet资料下载
参数资料
| 型号： | 90757-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 1/3页 |
| 文件大小： | 0K |
| 描述： | SEATING TOOL ASSY H.M. 77 PINS |
| 标准包装： | 1 |
| 系列： | * |
Seating Tool 90757-1 ?
For Z-PACK* 77-Position 2mm ?
Pin Headers with ACTION PIN* Contacts
Instruction Sheet
408-9916
27 JUN 12 Rev B
Adapter 354698-1 (Black) ?
Qty Per Seating Tool: 1
Socket Set Screw 2-21012-8 (No. 6-32×19 in.)
Qty Per Seating Tool: 3
Blade 904809-2 (11 Positions) ?
Qty Per Seating Tool: 1
ACTION PIN
Contact
1. INTRODUCTION
Seating Tools 90757-1 is used to seat Z-PACK ?
77-position 2mm pin headers with ACTION PIN
contacts to allow solderless pc board installation.
Typical Z-PACK 2mm
77-Position Pin Header
(Reference Part No.
106081-1)
Printed Circuit (PC) Board
(Ref)
PC Board Support Fixture
(Ref)
Figure 1
During seating, the seating tool sits inside the header
housing with the blades engaging the housing floor
and contact shoulders, preventing the contacts from
pushing out of the housing.
NOTE
i
All dimensions in this instruction sheet are in metric
units [with U. S. customary units in brackets]. ?
?
3. REQUIREMENTS
3.1. PC Board Support Fixture (Customer Supplied)
A pc board support must be used to provide proper
Read these instructions and understand them before
using the seating tool.
Reasons for reissue of this instruction sheet are
provided in Section 7, REVISION SUMMARY.
2. DESCRIPTION
The seating tool is an assembly of an adapter and a
blade.
support for the pc board and to protect the pc board
and header assembly from damage. The board
support fixture must be designed for specific needs
using the following recommendations:
— It should be at least 25.4 mm [1 in.] wider than
the pc board
— It should have a flat surface with a cutout of at
least 28.5 mm [1.12 in.] deep (to allow adequate
clearance for the header assembly)
? 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. company ?
All Rights Reserved
*Trademark
TOOLING ASSISTANCE CENTER 1-800-722-1111 ?
PRODUCT INFORMATION 1-800-522-6752
This controlled document is subject to change. ?
For latest revision and Regional Customer Service,
visit our website at www.te.com
1 of 3
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or company names may be trademarks of their respective owners.
相关PDF资料 |
PDF描述 |
|---|---|
| 90758-2 | DIE SET FOR PRO-C III 26-22 AWG |
| 90759-2 | DIE SET FOR PRO-C III 22-20,18 |
| 90800-2 | DIE SET HI-DEN D-SUB CRIMP CONT |
| 90869-2 | DIE SET 24-18 AWG USE WITH A9996 |
| 90870-2 | DIE SET FOR PROC III 30-28,26-24 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 907-575 | 功能描述:支架与垫片 Plastic Spcr .575 in Nylon White RoHS:否 制造商:Schurter 类型:Transipillar Spacers 长度:16 m 螺纹大小:M4 外径:10 mm 材料:Nylon with Steel 电镀:Zinc |
| 907-580 | 功能描述:支架与垫片 Plastic Spcr .58 in Nylon White RoHS:否 制造商:Schurter 类型:Transipillar Spacers 长度:16 m 螺纹大小:M4 外径:10 mm 材料:Nylon with Steel 电镀:Zinc |
| 90758-1 | 功能描述:折皱器 TOOL ASSY W/DIE SET MINI UNIV MNL RoHS:否 制造商:Hirose Connector 类型: 描述/功能:Cable and Shield Crimper |
| 90758-2 | 功能描述:冲压机与冲模 PROCRIMP DIE MINI UMNL RoHS:否 制造商:Souriau 大小: 产品:Dies 类型:Crimping 描述/功能: |
| 907-585 | 功能描述:支架与垫片 Plastic Spcr .585 in Nylon White RoHS:否 制造商:Schurter 类型:Transipillar Spacers 长度:16 m 螺纹大小:M4 外径:10 mm 材料:Nylon with Steel 电镀:Zinc |
发布紧急采购，3分钟左右您将得到回复。