- 您现在的位置：买卖IC网 > Datasheet目录612 > 90758-2 (TE Connectivity)DIE SET FOR PRO-C III 26-22 AWG Datasheet资料下载
参数资料
| 型号： | 90758-2 |
| 厂商： | TE Connectivity |
| 文件页数： | 1/5页 |
| 文件大小： | 0K |
| 描述： | DIE SET FOR PRO-C III 26-22 AWG |
| 标准包装： | 1 |
| 系列： | Pro-Crimper III，微型通用 MATE-N-LOK |
| 压接或电缆尺寸： | 22-26 AWG |
| 压接手柄： | A9966-ND |
| 连接器类型： | 压接端子 |
| 产品目录页面： | 425 (CN2011-ZH PDF) |
| 配用： | 170365-4-ND - CONN SOCKET 22-26AWG MINI-UMNL A97678-ND - CONN SOCKET 22-26AWG GOLD CRIMP A97676-ND - CONN PIN 22-26AWG M-U MNL GOLD A33327-ND - CONN PIN 22-26AWG GOLD CRIMP A33328-ND - CONN SOCKET 22-26AWG GOLD CRIMP A32014-ND - CONN SOCKET 22-26AWG GOLD CRIMP A32013-ND - CONN PIN 22-26AWG GOLD CRIMP A28811-ND - CONN SOCKET 22-26AWG GOLD CRIMP A28810-ND - CONN SOCKET 22-26AWG TIN CRIMP A28803-ND - CONN PIN 22-26AWG GOLD CRIMP 更多... |
| 相关产品： | 679304-1-ND - TOOL PNEUMATIC HEAD ASSEMBLY A97885-ND - TOOL HAND CRIMPING SDE PEW 12 A9996-ND - PRO CRIMPER HAND TOOL W/O DIES |
| 其它名称： | A30039 |
PRO-CRIMPER* III Hand
Crimping Tool Assembly 90758-1
with Die AssemblY 90758-2
Instruction Sheet
408-9938
01 NOV 11 Rev D
PROPER USE GUIDELINES
Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use
and low volume applications. A wide selection of powered application equipment for extended-use, production operations is available.
Locator Assembly
(Supplied with Die Assembly
Front of Tool
(Locator Side)
Die Assembly
Stationary Jaw
Back of Tool Frame
(Wire Side)
Pivot Pin
PRO-CRIMPER III Hand Tool
Frame 354940-1 (408-9930)
Moving Jaw
Ratchet
Adjustment
Wheel
The PRO-CRIMPER III Hand Crimping Tool is a “Commercial” grade tool and is designed
primarily for field installation, repair, maintenance work, or prototyping in industrial,
commercial, or institutional applications. Product crimped with this tool will meet the crimp
height requirement for hand tools in the appropriate Application Specification (114-series),
but may not comply with other feature parameters of the specification.
TE Connectivity offers a variety of tools to satisfy your performance requirements.
For additional information, contact the Tooling Assistance Center at 1-800-722-1111.
Moving Handle
Stationary Handle
TE DIE
ASSEMBLY
90758-2
TE LOCATOR
ASSEMBLY?
58516-1
CONTACT
FAMILY?
Mini Universal
MATE-N-LOK*
Connectors
SIZE (AWG)
26-22
WIRE
INSUL DIA
1.19-1.75
[.047-.069]
STRIP LENGTH
3.20 to 3.71
[.126 to .146]
?Supplied with die assembly. Also available separately.
?Contact the TOOLING ASSISTANCE CENTER or PRODUCT INFORMATION (see below) for specific contact part numbers.
Figure 1
Dimensions in this instruction sheet are in
millimeters [with inch equivalents provided in
i
1. INTRODUCTION
PRO-CRIMPER III Hand Crimping Tool Assembly
90758-1 consists of Die Assembly 90758-2 and
PRO-CRIMPER III Hand Crimping Tool Frame
354940-1 (see Instruction Sheet 408-9930). The die
assembly consists of crimping dies and a locator
assembly.
Read these instructions thoroughly before crimping
any contacts.
NOTE
brackets]. Figures and illustrations are for
reference only and are not drawn to scale.
Reasons for reissue of this instruction sheet are
provided in Section 11, REVISION SUMMARY.
2. DESCRIPTION (See Figures 1 and 2)
The tool consist of a stationary jaw and handle, a
moving jaw and handle, and an adjustable ratchet that
ensures full contact crimping. The tool frame holds a
die assembly with two crimping sections.
The die assembly features a wire anvil, an insulation
anvil, a wire crimper, and an insulation crimper.
Attached to the outside of the frame is a locator
assembly, which contains a locator, spring retainer,
and a contact support.
Die retaining pins and die retaining screws are used to
position and secure the dies in the tool frame. A nut is
used on the upper die retaining screw to hold the
locator assembly in place.
?2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company
All Rights Reserved
*Trademark
TOOLING ASSISTANCE CENTER 1-800-722-1111
PRODUCT INFORMATION 1-800-522-6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.te.com
1 of 5
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or Company names may be trademarks of their respective owners.
LOC B
相关PDF资料 |
PDF描述 |
|---|---|
| 90759-2 | DIE SET FOR PRO-C III 22-20,18 |
| 90800-2 | DIE SET HI-DEN D-SUB CRIMP CONT |
| 90869-2 | DIE SET 24-18 AWG USE WITH A9996 |
| 90870-2 | DIE SET FOR PROC III 30-28,26-24 |
| 90871-2 | DIE SET 20-14 AWG USE WITH A9996 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 907-585 | 功能描述:支架与垫片 Plastic Spcr .585 in Nylon White RoHS:否 制造商:Schurter 类型:Transipillar Spacers 长度:16 m 螺纹大小:M4 外径:10 mm 材料:Nylon with Steel 电镀:Zinc |
| 907-590 | 功能描述:支架与垫片 Plastic Spcr .59 in Nylon White RoHS:否 制造商:Schurter 类型:Transipillar Spacers 长度:16 m 螺纹大小:M4 外径:10 mm 材料:Nylon with Steel 电镀:Zinc |
| 90759-1 | 功能描述:折皱器 PROCRIMP W/DIE TOOL MINI UNIV M-N-L RoHS:否 制造商:Hirose Connector 类型: 描述/功能:Cable and Shield Crimper |
| 90759-2 | 功能描述:冲压机与冲模 DIE 22-18 AWG RoHS:否 制造商:Souriau 大小: 产品:Dies 类型:Crimping 描述/功能: |
| 907-595 | 功能描述:支架与垫片 Plastic Spcr .595 in Nylon White RoHS:否 制造商:Schurter 类型:Transipillar Spacers 长度:16 m 螺纹大小:M4 外径:10 mm 材料:Nylon with Steel 电镀:Zinc |
发布紧急采购，3分钟左右您将得到回复。