- 您现在的位置：买卖IC网 > Datasheet目录612 > 90800-2 (TE Connectivity)DIE SET HI-DEN D-SUB CRIMP CONT Datasheet资料下载
参数资料
| 型号： | 90800-2 |
| 厂商： | TE Connectivity |
| 文件页数： | 1/5页 |
| 文件大小： | 0K |
| 描述： | DIE SET HI-DEN D-SUB CRIMP CONT |
| 标准包装： | 1 |
| 系列： | Pro-Crimper III |
| 压接或电缆尺寸： | 22-28 AWG |
| 压接手柄： | A9996-ND |
| 连接器类型： | 压接端子 |
| 配用： | 1658670-5-ND - CONN PIN 22-28AWG CRIMP 30GOLD A31956-ND - CONN D-SUB SOCKET 22-28AWG GOLD A31955-ND - CONN D-SUB SOCKET 22-28AWG GOLD A31954-ND - CONN D-SUB PIN 22-28AWG GOLD A31953-ND - CONN D-SUB PIN 22-28AWG GOLD |
| 相关产品： | 679304-1-ND - TOOL PNEUMATIC HEAD ASSEMBLY A97885-ND - TOOL HAND CRIMPING SDE PEW 12 A9996-ND - PRO CRIMPER HAND TOOL W/O DIES |
| 其它名称： | A9816 |
PRO-CRIMPER* III Hand Crimping
Tool Assembly 90800-1 with
Die Assembly 90800-2
Instruction Sheet
408-4007
19 APR 11 Rev D
PROPER USE GUIDELINES
Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use and low
volume applications. A wide selection of powered application equipment for extended-use, production operations is available.
Locator Assembly
(Supplied with Die Assembly)
Stationary Jaw
Pivot Pin
Die Assembly
Back of Tool Frame
(Wire Side)
Moving Jaw
Ratchet
Die Retaining Screw
(2 Places)
Ratchet Adjustment
Wheel
The PRO-CRIMPER III Hand Crimping Tool is a “Commercial” grade tool and is
designed primarily for field installation, repair, maintenance work, or prototyping in
industrial, commercial, or institutional applications. Product crimped with this tool will
meet the crimp height requirement for hand tools in the appropriate Application
Specification (114-series), but may not comply with other feature parameters of the
specification. TE Connectivity offers a variety of tools to satisfy your performance
requirements. For additional information, contact the Tooling Assistance Center at
1-800-722-1111.
PRO-CRIMPER III Hand Tool
Frame 354940-1 (408-9930)
Stationary Handle
Moving Handle
WIRE
DIE ASSEMBLY
90800-2
LOCATOR
ASSEMBLY
58516-1
PRODUCT FAMILY
AMPLIMITE* HD
Crimp-Snap Contacts
SIZE RANGE
(AWG)
28-22
INSULATION
DIAMETER
(mm [in.])
0.76-1.02
[.030-.040]
STRIP LENGTH
(mm [in.])
3.56-3.96
[.140-.156]
Figure 1
Dimensions in this instruction sheet are in metric
units [with U.S. customary units in brackets].
i
1. INTRODUCTION
PRO-CRIMPER III Hand Tool Assembly 90800-1
consists of PRO-CRIMPER III Hand Tool Frame
354940-1 and Die Assembly 90800-2. The tool
assembly is used to crimp the contacts given in
Figure 1,
Read these instructions thoroughly before using the
tool assembly.
NOTE
Figures are not drawn to scale.
For additional information on the hand tool frame, refer
to 408-9930.
Reasons for reissue of this instruction sheet are
provided in Section 9, REVISION SUMMARY.
2. DESCRIPTION (See Figure 1)
The tool consist of a stationary jaw and handle, a
moving jaw and handle, and an adjustable ratchet that
ensures full crimping. The tool features a ratchet
adjustment wheel for adjusting the crimp height.
A locator assembly is attached to the tool frame and
consists of a locator, spring retainer, and contact
support. The contact support prevents the contact from
bending during crimping. A nut used on the long die
retaining screw holds the locator assembly in place.
The die assembly consists of two anvil dies (wire and
insulation) and two crimper dies (wire and insulation).
?2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company
All Rights Reserved
*Trademark
TOOLING ASSISTANCE CENTER 1-800-722-1111
PRODUCT INFORMATION 1-800-522-6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.te.com
1 of 5
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or Company names may be trademarks of their respective owners.
LOC B
相关PDF资料 |
PDF描述 |
|---|---|
| 90869-2 | DIE SET 24-18 AWG USE WITH A9996 |
| 90870-2 | DIE SET FOR PROC III 30-28,26-24 |
| 90871-2 | DIE SET 20-14 AWG USE WITH A9996 |
| 90872-1 | TOOL CRIMP .093 AWG 24 W/DIE |
| 91002-1 | TOOL INSERTION .062 & .093 CONN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 908-0020 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:PUNCH 15 WAY D FRONT MOUNT |
| 908-0030 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:PUNCH 25 WAY D FRONT MOUNT |
| 908003004 | 制造商:Molex 功能描述: |
| 90800-3004 | 功能描述:集管和线壳 1.27mm PF Hdr RA Lop opro Stag.76Au 4 Ckt RoHS:否 产品种类:1.0MM Rectangular Connectors 产品类型:Headers - Pin Strip 系列:DF50 触点类型:Pin (Male) 节距:1 mm 位置/触点数量:16 排数:1 安装风格:SMD/SMT 安装角:Right 端接类型:Solder 外壳材料:Liquid Crystal Polymer (LCP) 触点材料:Brass 触点电镀:Gold 制造商:Hirose Connector |
| 90800-3006 | 功能描述:集管和线壳 1.27MM PF HDR RA LOP OPRO STAG.76AU 6 CKT RoHS:否 产品种类:1.0MM Rectangular Connectors 产品类型:Headers - Pin Strip 系列:DF50 触点类型:Pin (Male) 节距:1 mm 位置/触点数量:16 排数:1 安装风格:SMD/SMT 安装角:Right 端接类型:Solder 外壳材料:Liquid Crystal Polymer (LCP) 触点材料:Brass 触点电镀:Gold 制造商:Hirose Connector |
发布紧急采购，3分钟左右您将得到回复。