- 您现在的位置：买卖IC网 > Datasheet目录613 > 91338-1 (TE Connectivity)0.64 MM CONTACT PRO-CRIMPER Datasheet资料下载
参数资料
| 型号： | 91338-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 4/6页 |
| 文件大小： | 0K |
| 描述： | 0.64 MM CONTACT PRO-CRIMPER |
| 标准包装： | 1 |
| 系列： | Pro-Crimper III |
| 工具类型： | 手动压接器 |
| 适用于相关产品： | 触点，18-20 AWG |
| 特点： | 侧面插入，棘齿 |
!
i
PRO- CRIMPER III Hand Crimping Tool Assembly 91338- 1
CAUTION Make sure that both sides of the contact
insulation barrel are started evenly into the
crimping chamber. Do NOT attempt to crimp an
improperly positioned contact.
5. Hold the contact in position, and squeeze the
tool handles together until ratchet engages
sufficiently to hold the contact in position. Do NOT
deform insulation barrel or wire barrel.
6. Insert stripped wire into contact insulation and
wire barrels until it is butted against the wire stop,
as shown in Figure 3.
7. Holding the wire in place, squeeze tool handles
together until ratchet releases. Allow tool handles
to open and remove crimped contact.
NOTE The crimped contact may stick in the crimping
area, but can be removed by pushing downward
on the top of the locator (see Figure 3).
8. Check the contact crimp height as described in
Section 6, CRIMP HEIGHT INSPECTION. If
necessary, adjust the crimp height as described in
Section 7, RATCHET ADJUSTMENT.
6. CRIMP HEIGHT INSPECTION
Crimp height inspection is performed through the use
of a micrometer with a modified anvil, commonly
referred to as a crimp--height comparator. Tyco
Electronics does not manufacture or market
crimp--height comparators. Detailed information on
obtaining and using crimp--height comparators can be
found in instruction sheet 408--7424.
To measure the crimp height:
1. Refer to Figure 4 and select a wire (maximum
size) for each crimp section listed in the table.
408- 8377
3. Using the crimp height comparator, measure the
wire barrel crimp height as shown in Figure 4. If the
crimp height conforms to the dimensions provided
in Figure 4, then the tool is considered
dimensionally correct. If the crimp height does not
conform to the dimensions provided, the tool must
be adjusted. Refer to Section 7, RATCHET (Crimp
Height) ADJUSTMENT.
For additional information concerning the use of the
crimp height comparator, refer to Instruction Sheet
408--7424.
7. RATCHET (Crimp Height) ADJUSTMENT (Figure 5)
1. Remove the lockscrew from the ratchet
adjustment wheel.
2. With a screwdriver, adjust the ratchet wheel
from the locator side of the tool.
3. Observe the ratchet adjustment wheel. If a
tighter crimp is required, rotate the adjustment
wheel counterclockwise to a higher--numbered
setting. If a looser crimp is required, rotate the
adjustment wheel clockwise to a lower--numbered
setting.
4. Re--assemble the lockscrew.
5. Make a sample crimp and measure the crimp
height. If the dimension is unacceptable, continue
to adjust the ratchet, and again measure a sample
crimp.
Screwdriver
Position Point on
Center of Wire
Barrel Opposite
Seam
Modified
Anvil
“A”
+.05
+[.002]
Ratchet Adjustment
Wheel
Lockscrew
(Typ)
Wire Size
AWG (Max.)
20
18
Crimp Section
Marking
20
18
Crimp Height
Dimension “A”
1.07 [.042]
1.19 [.047]
Figure 5
Figure 4
2. Crimp the contact(s) according to the
procedures provided in Section 5, CRIMPING
PROCEDURE.
4 of 6
Tyco Electronics Corporation
Rev A
相关PDF资料 |
PDF描述 |
|---|---|
| 91338-2 | TOOL HAND PRO CRIMPER 20-18AWG |
| 91346-1 | 2MM HM SEATING TOOL TYPE AB 25 |
| 91349-4 | SEATING TL HDR 4 PR 20 COL |
| 91360-1 | SEATING TL 2MM HM TYPE M |
| 91369-2 | PRO-C DIE SL156 16 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 91338-1003 | 制造商:MOLEX 制造商全称:Molex Electronics Ltd. 功能描述:5.00mm (.197") Pitch Appli-Mate RAST 5 Female Connector, Vertical, 1 Circuit, Grey, Tin (Sn) Plating |
| 91338-1004 | 制造商:MOLEX 制造商全称:Molex Electronics Ltd. 功能描述:5.00mm (.197") Pitch Appli-Mate RAST 5 Female Connector, Vertical, 1 Circuit, Yellow, Tin (Sn) Plating |
| 91338-2 | 功能描述:冲压机与冲模 PRO CRIMPER DIE .64MM RoHS:否 制造商:Souriau 大小: 产品:Dies 类型:Crimping 描述/功能: |
| 913382-000 | 制造商:ELO Touch Solutions 功能描述:PANEL;17.0IN;FLAT PROFILE;ANTI |
| 91338-3403 | 制造商:MOLEX 制造商全称:Molex Electronics Ltd. 功能描述:5.00mm (.197") Pitch Appli-Mate RAST 5 Female Connector, Vertical, 1 Circuit, Blue, Silver (Ag) Plating, Reference K03 |
发布紧急采购，3分钟左右您将得到回复。