- 您现在的位置：买卖IC网 > PDF目录18525 > 91902-1 (TE Connectivity)TOOL DIE ASSEM USE W/A9996-ND PDF资料下载
参数资料
| 型号： | 91902-1 |
| 厂商： | TE Connectivity |
| 文件页数： | 2/4页 |
| 文件大小： | 0K |
| 描述： | TOOL DIE ASSEM USE W/A9996-ND |
| 标准包装： | 25 |
| 系列： | Coaxicon |
| 压接或电缆尺寸： | RG/U-142，142A，142B |
| 压接手柄： | A9996-ND |
| 连接器类型： | 压接端子 |
| 相关产品： | A9996-ND - PRO CRIMPER HAND TOOL W/O DIES |
| 其它名称： | A29142 |
9. To remove the die assembly from the tool frame,
close the tool handles until the ratchet releases,
remove the two die retaining screws and four die
retaining pins, and slide the dies out of the jaws.
1. Insert the crimped center contact into the
connector body until the cable dielectric butts
against the dielectric inside the connector body or
until the center contact is securely positioned
within the connector. Make sure that the braided
shield of the cable is over the support sleeve of the
connector body and that no strands from the shield
enter the connector body.
2. Slide the ferrule over the braided shield and
onto the connector until the ferrule butts against
the shoulder of the connector body.
3. Place the ferrule in the appropriate crimping
chamber of the anvil die so that the shoulder of the
connector body butts against the edge of the die.
1. Close the tool handles until the die assembly is
partially closed.
2. Assemble the center contact onto the center
conductor of the cable, and place the center
contact on the anvil in the smallest crimping
chamber. Make sure the flange on the end of the
center contact butts against the die.
3. Holding the cable in place, close the tool
handles until the ratchet releases.
4. Allow the tool handles to open fully and remove
the crimped center contact from the dies.
Figure 2
4. While holding the assembly together, close the
tool handles until the dies have closed enough to
secure the assembly in place.
5. Carefully close the tool handles until the ratchet
releases, then allow the tool handles to open fully,
and remove the crimped connector from the dies.
相关PDF资料 |
PDF描述 |
|---|---|
| ATS060B | CRYSTAL 6.0 MHZ 18PF |
| ASA2-16.000MHZ-L-T | OSC 16.000 MHZ 1.8V SMD |
| 252A154A40NB | POT JOYSTICK 150K OHM W/SWITCH |
| ATS12A | CRYSTAL 12 MHZ 20 PF FUND |
| 252B124A40NB | POT JOYSTICK 120K OHM W/SWITCH |
相关代理商/技术参数 |
参数描述 |
|---|---|
| 9190292 | 制造商:Glenair Inc 功能描述:COVER - Bulk |
| 9190293 | 制造商:Amphenol Corporation 功能描述:10-189231-032 - Bulk |
| 91-903 | 制造商:Stancor 功能描述:Electromechanical Relay DPDT 15A 208/240VAC |
| 9190-3 | 功能描述:螺丝和紧固件 BIND HEAD SCRW BLACK RoHS:否 制造商:Unspecified 产品: 类型:Washer 螺纹大小: 长度: 材料:Steel 电镀:Nickel 螺丝头: 螺丝类型: |
| 9-1903015-3 | 功能描述:HDMI, Displayport和DVI连接器 HDMI REC SMT WITH TAPE RoHS:否 制造商:Molex 系列:DisplayPort 产品类型:Displayport 型式:Female 位置/触点数量:20 端接类型:Solder 安装风格:SMD/SMT 方向:Right Angle 触点电镀:Gold |
发布紧急采购，3分钟左右您将得到回复。