- 您现在的位置：买卖IC网 > PDF目录1978 > AD1871YRSZ-REEL (Analog Devices Inc)IC ADC STEREO 24BIT 96KHZ 28SSOP PDF资料下载
参数资料
| 型号： | AD1871YRSZ-REEL |
| 厂商： | Analog Devices Inc |
| 文件页数： | 9/28页 |
| 文件大小： | 0K |
| 描述： | IC ADC STEREO 24BIT 96KHZ 28SSOP |
| 标准包装： | 1,500 |
| 位数： | 24 |
| 采样率（每秒）： | 96k |
| 数据接口： | 串行，SPI? |
| 转换器数目： | 2 |
| 电压电源： | 模拟和数字 |
| 工作温度： | -40°C ~ 105°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 28-SSOP（0.209"，5.30mm 宽） |
| 供应商设备封装： | 28-SSOP |
| 包装： | 带卷 (TR) |
| 输入数目和类型： | 4 个单端，单极 |
第1页第2页第3页第4页第5页第6页第7页第8页当前第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页
REV. 0
AD1871
–17–
Digital Decimating Filters
The filtering and decimation of the AD1871’s modulator data
stream is implemented in an embedded DSP engine. The first
stage of filtering is the sinc filtering, which has selectable deci-
mation (selected by the modulator clock control bit (AMC, see
Modulator section). The default decimation in the sinc stage
provides a sample rate reduction of 16; this corresponds with a
MODCLK rate of 128
fS. The alternate setting of the AMC
Bit gives a sinc decimation factor of 8 that corresponds with a
MODCLK rate of 64
fS. The output of the sinc decimator
stage is at a rate of 8
fS.
The filter engine implements two half-band FIR filter sections
and a sinc compensation stage that together give a further
decimation factor of 8. Please refer to TPCs 1 through 4 for
details on the responses of the sinc and FIR filter sections.
TPC 5 gives the composite response of the sinc and FIR filters.
High-Pass Filter
The AD1871 features an optional high-pass filter section that
provides the ability of rejecting dc from the output data stream.
The high-pass filter is enabled by setting Bit 8 (HPE) of Control
Register I to 1. Please refer to TPC 7 and TPC 8 for details of
the high-pass filter characteristics.
ADC Coding
The ADC’s output data stream is in a two’s complement
encoded format. The word width can be selected from 16 bits,
20 bits, or 24 bits (see Table VI and Table VII). The coding
scheme is detailed in Table I.
Table I. ADC Coding
Code
Level
011111.......1111
+Full Scale
000000........0000
0 (Ref Level)
100000........0001
–Full Scale
Analog Input Section
The analog input section comprises a differential PGA stage.
It can also be configured for single-ended inputs, allowing
two such inputs to be selected via a multiplex switch. The
PGA has five gain settings (see Table V) ranging from 0 dB
to 12 dB in 3 dB steps.
In Differential Mode, the VINxP and VINxN input pins are
connected to a pair of inverting amplifiers whose outputs are
connected to the CAPxN and CAPxP pins, respectively.
(See Figure 10.)
CAPxN
CAPxP
VCM
VINxP
VINxN
VCM
Figure 10. Differential Analog Input
In Single-Ended Mode, either VINxP or VINxN can be selected
as the input. The pair of input inverting amplifiers is reconfig-
ured as a single-ended-to-differential conversion stage. Again the
outputs of the differential section are connected to Pins CAPxP
and CAPxN (see Figure 11).
CAPxN
CAPxP
VCM
VINxP
VINxN
VCM
Figure 11. Single-Ended Analog Input
The analog input section is enabled (powered ON) by default
on reset. If it is required to bypass the analog input section by
using the modulator input pins (CAPxP and CAPxN) directly,
then the analog input section must be powered down by setting
Bits MER and MEL in Control Register III.
Serial Data Interface
The AD1871’s serial data interface consists of three pins
(LRCLK, BCLK, and SDATA). LRCLK is the framing sig-
nal for left and right channel samples and its frequency is
equal to the sampling frequency (fS). BCLK is the serial clock
used to clock the data samples from the AD1871 and its fre-
quency is equal to 64
fS (giving 32 BCLK periods for each
of the left and right channels). SDATA outputs the left and right
channel sample data coincident with the falling edge of BCLK.
The serial data interface supports all the popular audio interface
standards, such as I
2S, left-justified (LJ), and right-justified (RJ), as
well as the serial interfaces of modern DSPs. The Interface Mode is
selected by programming the Bits DF1–DF0 of Control Register II
(see Tables VI and VIII).
The data sample width can be selected from 16, 20, or 24 bits by
programming Bits WW1–WW0 of Control Register II (see
Tables VI and VII).
相关PDF资料 |
PDF描述 |
|---|---|
| AD1877JRZ-RL | IC ADC STEREO 16BIT 28-SOIC |
| AD1974YSTZ-RL | IC CODEC 4CH ADC W/PLL 48-LQFP |
| AD2S99BP | IC OSC SINUSOIDAL 20KHZ 20-PLCC |
| AD5310BRM | IC DAC 10BIT R-R W/BUFF 8-MSOP |
| AD5341BRUZ | IC DAC 12BIT SNGL VOUT 20TSSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD1876 | 制造商:AD 制造商全称:Analog Devices 功能描述:16-Bit 100 kSPS Sampling ADC |
| AD1876JN | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
| AD1877 | 制造商:AD 制造商全称:Analog Devices 功能描述:Single-Supply 16-Bit Stereo ADC |
| AD1877JR | 制造商:Rochester Electronics LLC 功能描述:IC, +5V 16-BIT STEREO ADC - Bulk 制造商:Analog Devices 功能描述:IC +5V 16-BIT STEREO ADC |
| AD1877JR-REEL | 制造商:Rochester Electronics LLC 功能描述:SINGLE SUPPLY 5V 16-BIT STERO ADC - Tape and Reel 制造商:Analog Devices 功能描述: |
发布紧急采购，3分钟左右您将得到回复。