参数资料
| 型号： | AD5024BRUZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 17/28页 |
| 文件大小： | 0K |
| 描述： | IC DAC QUAD 12BIT 1LSB 16-TSSOP |
| 产品培训模块： | Data Converter Fundamentals DAC Architectures |
| 标准包装： | 1 |
| 系列： | nanoDAC™ |
| 设置时间： | 8µs |
| 位数： | 12 |
| 数据接口： | 串行，SPI? |
| 转换器数目： | 4 |
| 电压电源： | 单电源 |
| 功率耗散（最大）： | 30mW |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-TSSOP（0.173"，4.40mm 宽） |
| 供应商设备封装： | 16-TSSOP |
| 包装： | 管件 |
| 输出数目和类型： | 4 电压，双极 |
| 采样率（每秒）： | 125k |
| 产品目录页面： | 781 (CN2011-ZH PDF) |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页当前第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页
AD5024/AD5044/AD5064
Data Sheet
Rev. F | Page 24 of 28
POWER SUPPLY BYPASSING AND GROUNDING
When accuracy is important in a circuit, it is helpful to carefully
consider the power supply and ground return layout on the board.
The printed circuit board (PCB) containing the AD5024/AD5044/
AD5064/AD5064-1 should have separate analog and digital
sections. If the AD5024/AD5044/AD5064/AD5064-1 are in a
system where other devices require an AGND-to-DGND
connection, the connection should be made at one point only.
This ground point should be as close as possible to the
AD5024/AD5044/AD5064/AD5064-1.
The power supply to the AD5024/AD5044/AD5064/AD5064-1
should be bypassed with 10 F and 0.1 F capacitors. The capaci-
tors should be as physically close as possible to the device, with
the 0.1 F capacitor ideally right up against the device. The 10 F
capacitors are the tantalum bead type. It is important that the
0.1 F capacitor have low effective series resistance (ESR) and
low effective series inductance (ESI), such as is typical of common
ceramic types of capacitors. This 0.1 F capacitor provides a low
impedance path to ground for high frequencies caused by
transient currents due to internal logic switching.
The power supply line should have as large a trace as possible to
provide a low impedance path and reduce glitch effects on the
supply line. Clocks and other fast switching digital signals should
be shielded from other parts of the board by digital ground. Avoid
crossover of digital and analog signals, if possible. When traces
cross on opposite sides of the board, ensure that they run at right
angles to each other to reduce feedthrough effects through the
board. The best board layout technique is the microstrip tech-
nique, where the component side of the board is dedicated to the
ground plane only and the signal traces are placed on the solder
side. However, this is not always possible with a 2-layer board.
相关PDF资料 |
PDF描述 |
|---|---|
| MS27473E24B29SC | CONN PLUG 29POS STRAIGHT W/SCKT |
| VI-B03-MY-F3 | CONVERTER MOD DC/DC 24V 50W |
| VI-B03-MY-F1 | CONVERTER MOD DC/DC 24V 50W |
| VE-26B-MW-F1 | CONVERTER MOD DC/DC 95V 100W |
| LTC1659IMS8#PBF | IC DAC 12BIT R-R 8-MSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD5024BRUZ-REEL7 | 功能描述:IC DAC 12BIT QUAD SPI 16-TSSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:nanoDAC™ 标准包装:47 系列:- 设置时间:2µs 位数:14 数据接口:并联 转换器数目:1 电压电源:单电源 功率耗散（最大）:55µW 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:28-SSOP（0.209"，5.30mm 宽） 供应商设备封装:28-SSOP 包装:管件 输出数目和类型:1 电流，单极；1 电流，双极 采样率（每秒）:* |
| AD5024HB-C71 | 制造商:ADDA Corporation 功能描述:DC-FAN, 50X50X20 MM, 24 VOLTS, |
| AD5024HB-D71 | 功能描述:鼓风机 50mm 24VDC 12CFM RoHS:否 制造商:Murata 产品:Blowers 电流类型:DC 电源电压:5.3 V 气流:1 l/min 轴承类型: 噪声: 速度: 功率额定值: 框架尺寸 (mm):20 mm x 20 mm x 1.85 mm 外壳材料: 端接类型:SMD/SMT 系列:MZB |
| AD5024HB-D71-LF | 功能描述:风扇 50mm 24VDC 12CFM RoHS:否 制造商:Sanyo Denki 产品:Fans 电流类型: 电源电压:48 V 气流:636 CFM 轴承类型: 噪声:83 dBA 速度:6400 RPM 功率额定值:264 W 框架尺寸 (mm):172 mm x 150 mm x 102 mm 外壳材料:Aluminum 端接类型:Wire 系列: |
| AD5024LB-C71 | 制造商:ADDA Corporation 功能描述:DC-FAN, 50X50X20 MM, 24 VOLTS, |
发布紧急采购，3分钟左右您将得到回复。