- 您现在的位置：买卖IC网 > PDF目录9293 > AD5252BRU1-RL7 (Analog Devices Inc)IC DCP DUAL 1K 256POS 14TSSOP TR PDF资料下载
参数资料
| 型号： | AD5252BRU1-RL7 |
| 厂商： | Analog Devices Inc |
| 文件页数： | 10/28页 |
| 文件大小： | 0K |
| 描述： | IC DCP DUAL 1K 256POS 14TSSOP TR |
| 标准包装： | 1,000 |
| 接片： | 256 |
| 电阻（欧姆）： | 1k |
| 电路数： | 2 |
| 温度系数： | 标准值 650 ppm/°C |
| 存储器类型： | 非易失 |
| 接口： | I²C（设备位址） |
| 电源电压： | 2.7 V ~ 5.5 V，±2.25 V ~ 2.75 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 14-TSSOP（0.173"，4.40mm 宽） |
| 供应商设备封装： | 14-TSSOP |
| 包装： | 带卷 (TR) |
第1页第2页第3页第4页第5页第6页第7页第8页第9页当前第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页
AD5251/AD5252
Data Sheet
Rev. D | Page 18 of 28
RDAC/EEMEM Quick Commands
The AD5251/AD5252 feature 12 quick commands that facilitate
easy manipulation of RDAC wiper settings and provide RDAC-
to-EEMEM storing and restoring functions. The command
format is shown in Figure 31, and the command descriptions
are shown in Table 9.
When using a quick command, issuing a third byte is not needed,
but is allowed. The quick commands reset and store RDAC to
EEMEM require acknowledge polling to determine whether the
command has finished executing.
RAB Tolerance Stored in Read-Only Memory
The AD5251/AD5252 feature patented RAB tolerances storage in
the nonvolatile memory. The tolerance of each channel is stored
in the memory during the factory production and can be read
by users at any time. The knowledge of the stored tolerance,
users to predict RAB accurately. This feature is valuable for
precision, rheostat mode, and open-loop applications in which
knowledge of absolute resistance is critical.
The stored tolerances reside in the read-only memory and are
expressed as percentages. Each tolerance is stored in two memory
locations (see Table 10 ). The tolerance data is expressed in sign
magnitude binary format stored in two bytes; an example is
shown in Figure 32. For the first byte in Register N, the MSB
is designated for the sign (0 = + and 1 = –) and the 7 LSB is
designated for the integer portion of the tolerance. For the
second byte in Register N + 1, all eight data bits are designated
for the decimal portion of tolerance. As shown in Table 10
data readback from Address 11000 shows 0001 1100 and
Address 11001 shows 0000 1111, then RDAC0 tolerance can be
calculated as
MSB: 0 = +
Next 7 MSB: 001 1100 = 28
8 LSB: 0000 1111 = 15 × 2–8 = 0.06
Tolerance = 28.06% and, therefore,
RAB_ACTUAL = 12.806 k
EEMEM Write-Acknowledge Polling
After each write operation to the EEMEM registers, an
internal write cycle begins. The I2C interface of the device is
disabled. To determine if the internal write cycle is complete
and the I2C interface is enabled, interface polling can be
executed. I2C interface polling can be conducted by sending a
start condition, followed by the slave address and the write bit.
If the I2C interface responds with an ACK, the write cycle is
complete and the interface is ready to proceed with further
operations. Other-wise, I2C interface polling can be repeated
until it succeeds. Command 2 and Command 7 also require
acknowledge polling.
EEMEM Write Protection
Setting the WP pin to logic low after EEMEM programming
protects the memory and RDAC registers from future write
operations. In this mode, the EEMEM and RDAC read
operations function as normal.
Table 9. RDAC-to-EEMEM Interface and RDAC Operation Quick Command Bits (CMD/REG = 1, A2 = 0)
C3
C2
C1
C0
Command Description
0
NOP
0
1
Restore EEMEM (A1, A0) to RDAC (A1, A0)1
0
1
0
Store RDAC (A1, A0) to EEMEM (A1, A0)
0
1
Decrement RDAC (A1, A0) 6 dB
0
1
0
Decrement all RDACs 6 dB
0
1
0
1
Decrement RDAC (A1, A0) one step
0
1
0
Decrement all RDACs one step
0
1
Reset: restore EEMEMs to all RDACs
1
0
Increment RDACs (A1, A0) 6 dB
1
0
1
Increment all RDACs 6 dB
1
0
1
0
Increment RDACs (A1, A0) one step
1
0
1
Increment all RDACs one step
1
0
Reserved
:
1
Reserved
1 This command leaves the device in the EEMEM read power state, which consumes power. Issue the NOP command to return the device to its idle state.
相关PDF资料 |
PDF描述 |
|---|---|
| VI-263-MY-F3 | CONVERTER MOD DC/DC 24V 50W |
| DS1100Z-45+ | IC DELAY LINE 5TAP 45NS 8-SOIC |
| DS1100Z-45 | IC DELAY LINE 5TAP 45NS 8-SOIC |
| AD5207BRU100 | IC DGTL POT DUAL 256POS 14TSSOP |
| VI-263-MY-F1 | CONVERTER MOD DC/DC 24V 50W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD5252BRU50 | 功能描述:IC DCP DUAL 50K 256POS 14TSSOP RoHS:否 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:- 标准包装:3,000 系列:DPP 接片:32 电阻（欧姆）:10k 电路数:1 温度系数:标准值 300 ppm/°C 存储器类型:非易失 接口:3 线串行（芯片选择，递增，增/减） 电源电压:2.5 V ~ 6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-WFDFN 裸露焊盘 供应商设备封装:8-TDFN（2x3） 包装:带卷 (TR) |
| AD5252BRU50-RL7 | 功能描述:IC DCP DUAL 50K 256POS 14TSSOP RoHS:否 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:- 标准包装:3,000 系列:DPP 接片:32 电阻（欧姆）:10k 电路数:1 温度系数:标准值 300 ppm/°C 存储器类型:非易失 接口:3 线串行（芯片选择，递增，增/减） 电源电压:2.5 V ~ 6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-WFDFN 裸露焊盘 供应商设备封装:8-TDFN（2x3） 包装:带卷 (TR) |
| AD5252BRUZ1 | 功能描述:IC DGTL POT DUAL 1K I2C 14-TSSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1 系列:- 接片:256 电阻（欧姆）:100k 电路数:1 温度系数:标准值 35 ppm/°C 存储器类型:非易失 接口:3 线串口 电源电压:2.7 V ~ 5.25 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-WDFN 裸露焊盘 供应商设备封装:8-TDFN-EP（3x3） 包装:剪切带 (CT) 产品目录页面:1399 (CN2011-ZH PDF) 其它名称:MAX5423ETA+TCT |
| AD5252BRUZ10 | 功能描述:IC DIG POT DUAL 256 10K 14TSSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1 系列:- 接片:256 电阻（欧姆）:100k 电路数:1 温度系数:标准值 35 ppm/°C 存储器类型:非易失 接口:3 线串口 电源电压:2.7 V ~ 5.25 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-WDFN 裸露焊盘 供应商设备封装:8-TDFN-EP（3x3） 包装:剪切带 (CT) 产品目录页面:1399 (CN2011-ZH PDF) 其它名称:MAX5423ETA+TCT |
| AD5252BRUZ100 | 功能描述:IC DIG POT DUAL 256 100K 14TSSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1 系列:- 接片:256 电阻（欧姆）:100k 电路数:1 温度系数:标准值 35 ppm/°C 存储器类型:非易失 接口:3 线串口 电源电压:2.7 V ~ 5.25 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-WDFN 裸露焊盘 供应商设备封装:8-TDFN-EP（3x3） 包装:剪切带 (CT) 产品目录页面:1399 (CN2011-ZH PDF) 其它名称:MAX5423ETA+TCT |
发布紧急采购，3分钟左右您将得到回复。