参数资料
型号: AD5382BSTZ-3
厂商: Analog Devices Inc
文件页数: 8/40页
文件大小: 0K
描述: IC DAC 14BIT 32CHAN 3V 100LQFP
产品培训模块: Data Converter Fundamentals
DAC Architectures
产品变化通告: Redesign Change 28/Oct/2011
设计资源: 32 Channels of Programmable Voltage with Excellent Temperature Drift Performance Using AD5382 (CN0011)
AD5382 Channel Monitor Function (CN0012)
标准包装: 1
设置时间: 8µs
位数: 14
数据接口: 串行,并联
转换器数目: 32
电压电源: 单电源
功率耗散(最大): 65mW
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 100-LQFP
供应商设备封装: 100-LQFP(14x14)
包装: 托盘
输出数目和类型: 32 电压,单极
采样率(每秒): 125k
AD5382
Data Sheet
Rev. C | Page 16 of 40
Mnemonic
Function
PD
Power Down (Level Sensitive, Active High). PD is used to place the device in to low power mode where the device
consumes 2 A AIDD and 20 A DIDD. In power-down mode, all internal analog circuitry is placed in low power
mode, and the analog output is configured as a high impedance output or provides a 100 k load to ground,
depending on how the power-down mode is configured. The serial interface remains active during power-down.
FIFO EN
FIFO Enable (Level Sensitive, Active High). When connected to DVDD, the internal FIFO is enabled, allowing the user
to write to the device at full speed. FIFO is available only in parallel interface mode. The status of the FIFO EN pin is
sampled on power-up, and also following a CLEAR or RESET, to determine if the FIFO is enabled. In either serial or I2C
interface modes, the FIFO EN pin should be tied low.
DB11/(SPI/I2C)
Multifunction Input Pin. In parallel interface mode, this pin acts as DB11 of the parallel input data-word. In serial
interface mode, this pin acts as serial interface mode select. When serial interface mode is selected (SER/PAR = 1) and
this input is low, SPI mode is selected. In SPI mode, DB12 is the serial clock (SCLK) input and DB13 is the serial data
(DIN) input.
When serial interface mode is selected (SER/PAR = 1) and this input is high, I2C mode is selected. In this mode, DB12
is the serial clock (SCL) input and DB13 is the serial data (SDA) input.
DB12/(SCLK/SCL)
Multifunction Input Pin. In parallel interface mode, this pin acts as DB12 of the parallel input data-word. In serial
interface mode, this pin acts as a serial clock input.
Serial Interface Mode. In serial interface mode, data is clocked into the shift register on the falling edge of SCLK. This
operates at clock speeds up to 50 MHz.
I2C Mode. In I2C mode, this pin performs the SCL function, clocking data into the device. The data transfer rate in I2C
mode is compatible with both 100 kHz and 400 kHz operating modes.
DB13/(DIN/SDA)
Multifunction Data Input Pin. In parallel interface mode, this pin acts as DB13 of the parallel input data-word.
Serial Interface Mode. In serial interface mode, this pin acts as the serial data input. Data must be valid on the falling
edge of SCLK.
I2C Mode. In I2C mode, this pin is the serial data pin (SDA) operating as an open-drain input/output.
NC
No Connect. The user is advised not to connect any signals to these pins.
相关PDF资料
PDF描述
AD5390BCPZ-5 IC DAC 14BIT 16CHAN 5V 64LFCSP
AD5398ABCBZ-REEL IC DAC 10BIT CURRENT-SINK 9WLCSP
AD5405YCPZ-REEL7 IC DAC DUAL 12BIT MULT 40LFCSP
AD5415YRU IC DAC DUAL 12BIT MULT 24-TSSOP
AD5421CREZ IC DAC 16BIT SPI/SRL 28TSSOP
相关代理商/技术参数
参数描述
AD5382BSTZ-5 功能描述:IC DAC 14BIT 32CH 5V 100-LQFP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1,000 系列:- 设置时间:1µs 位数:8 数据接口:串行 转换器数目:8 电压电源:双 ± 功率耗散(最大):941mW 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:24-SOIC(0.295",7.50mm 宽) 供应商设备封装:24-SOIC W 包装:带卷 (TR) 输出数目和类型:8 电压,单极 采样率(每秒):*
AD5383BST 制造商:Analog Devices 功能描述:- Bulk
AD5383BST-3 制造商:Rochester Electronics LLC 功能描述:32/40-CHANNEL 3V/5V SINGLE SUPPLY 12/14-BIT VOUT DAC - Bulk 制造商:Analog Devices 功能描述:
AD5383BST-5 制造商:Analog Devices 功能描述:DAC 32-CH Resistor-String 12-bit 100-Pin LQFP 制造商:Rochester Electronics LLC 功能描述:32-CHN 5V SINGLE SUPPLY 12-BIT VOUT I.C. - Bulk
AD5383BST-5-REEL 制造商:Analog Devices 功能描述:DAC 32-CH Resistor-String 12-bit 100-Pin LQFP T/R