参数资料
型号: AD7190BRUZ
厂商: Analog Devices Inc
文件页数: 33/41页
文件大小: 0K
描述: IC ADC 2CH 24BIT W/PGA 24TSSOP
产品培训模块: Weigh Scale Introduction
设计资源: Precision Weigh Scale Design Using AD7190 with Internal PGA (CN0102)
特色产品: AD7190 Sigma-Delta Converter
标准包装: 62
位数: 24
采样率(每秒): 4.8k
数据接口: DSP,MICROWIRE?,QSPI?,串行,SPI?
转换器数目: 1
电压电源: 模拟和数字
工作温度: -40°C ~ 105°C
安装类型: 表面贴装
封装/外壳: 24-TSSOP(0.173",4.40mm 宽)
供应商设备封装: 24-TSSOP
包装: 管件
输入数目和类型: 2 个差分,双极;4 个伪差分,双极
产品目录页面: 777 (CN2011-ZH PDF)
AD7190
Data Sheet
Rev. C | Page 38 of 40
APPLICATIONS INFORMATION
The AD7190 provides a low-cost, high resolution analog-to-
digital function. Because the analog-to-digital function is
provided by a ∑- architecture, it makes the part more
immune to noisy environments, making it ideal for use in
sensor measurement and industrial and process control
applications.
WEIGH SCALES
Figure 32 shows the AD7190 being used in a weigh scale
application. The load cell is arranged in a bridge network and
gives a differential output voltage between its OUT+ and OUT–
terminals. Assuming a 5 V excitation voltage, the full-scale
output range from the transducer is 10 mV when the sensitivity
is 2 mV/V. The excitation voltage for the bridge can be used to
directly provide the reference for the ADC because the reference
input range includes the supply voltage.
A second advantage of using the AD7190 in transducer-based
applications is that the bridge power-down switch can be fully
utilized to minimize the power consumption of the system. The
bridge power-down switch is connected in series with the cold
side of the bridge. In normal operation, the switch is closed and
measurements can be taken. In applications in which current
consumption is being minimized, the AD7190 can be placed in
standby mode, thus significantly reducing the power consumed
in the application. In addition, the bridge power-down switch
can be opened while in standby mode, thus avoiding unnecessary
power consumption by the front-end transducer. When the part
is taken out of standby mode and the bridge power-down switch
is closed, the user should ensure that the front-end circuitry is
fully settled before attempting a read from the AD7190.
For simplicity, external filters are not included in Figure 32.
However, an R-C antialias filter should be included on each
analog input. This is required because the on-chip digital filter
does not provide any rejection around the modulator sampling
frequency or multiples of this frequency. Suitable values are a
100 Ω resistor in series with each analog input, a 0.1 μF capa-
citor between the analog inputs and 0.01 μF capacitors from
each analog input pin to AGND.
MCLK1 MCLK2
P0/REFIN2(–) P1/REFIN2(+)
DVDD DGND
5V
AIN1
IN+
IN–
OUT–
OUT+
AIN2
AIN3
AIN4
AINCOM
REFIN1(–)
BPDSW
AGND
AD7190
REFIN1(+)
REFERENCE
DETECT
SERIAL
INTERFACE
AND
CONTROL
LOGIC
TEMP
SENSOR
CLOCK
CIRCUITRY
AVDD
AGND
DOUT/RDY
DIN
SCLK
CS
SYNC
P3
P2
AVDD
AGND
Σ-Δ
ADC
PGA
MUX
07640-
024
Figure 32. Typical Application (Weigh Scale)
相关PDF资料
PDF描述
AD7715ARZ-5 IC ADC 16BIT SIGMA-DELTA 16-SOIC
AD7766BRUZ-2 IC ADC 24BIT 32KSPS SAR 16TSSOP
LM2901VDG IC COMP QUAD SGL SUPPLY 14SOIC
LTC1598LCG#PBF IC A/D CONV 12BIT SRL 8CH 24SSOP
AD7766BRUZ-1 IC ADC 24BIT 64KSPS SAR 16TSSOP
相关代理商/技术参数
参数描述
AD7190BRUZ 制造商:Analog Devices 功能描述:IC, ADC, 24BIT, 4.8KSPS, TSSOP-24
AD7190BRUZ-REEL 功能描述:IC ADC 2CH 24BIT W/PGA 24TSSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:16 采样率(每秒):45k 数据接口:串行 转换器数目:2 功率耗散(最大):315mW 电压电源:模拟和数字 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:28-SOIC(0.295",7.50mm 宽) 供应商设备封装:28-SOIC W 包装:带卷 (TR) 输入数目和类型:2 个单端,单极
AD7190WBRUZ 功能描述:24 Bit Analog to Digital Converter 2, 4 Input 1 Sigma-Delta 24-TSSOP 制造商:analog devices inc. 系列:- 包装:管件 零件状态:有效 位数:24 采样率(每秒):4.8k 输入数:2,4 输入类型:差分,个伪差分 数据接口:SPI,DSP 配置:MUX-PGA-ADC 无线电 - S/H:ADC:- A/D 转换器数:1 架构:三角积分 参考类型:外部, 内部 电压 - 电源,模拟:5V 电压 - 电源,数字:2.7 V ~ 5.25 V 特性:PGA,温度传感器 工作温度:-40°C ~ 105°C 封装/外壳:24-TSSOP(0.173",4.40mm 宽) 供应商器件封装:24-TSSOP 标准包装:1
AD7190WBRUZ-RL 制造商:Analog Devices 功能描述:
AD7191 制造商:AD 制造商全称:Analog Devices 功能描述:Pin-Programmable, Ultralow Noise, 24-Bit, Sigma-Delta ADC for Bridge Sensors