- 您现在的位置：买卖IC网 > PDF目录1980 > AD7298-1BCPZ-RL (Analog Devices Inc)IC ADC 10BIT SPI/SRL 8CH 20LFCSP PDF资料下载
参数资料
| 型号： | AD7298-1BCPZ-RL |
| 厂商： | Analog Devices Inc |
| 文件页数： | 9/25页 |
| 文件大小： | 0K |
| 描述： | IC ADC 10BIT SPI/SRL 8CH 20LFCSP |
| 标准包装： | 1 |
| 位数： | 10 |
| 采样率（每秒）： | 1M |
| 数据接口： | DSP，串行，SPI? |
| 转换器数目： | 1 |
| 功率耗散（最大）： | 23mW |
| 电压电源： | 单电源 |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 20-WFQFN 裸露焊盘，CSP |
| 供应商设备封装： | 20-LFCSP-WQ（4x4） |
| 包装： | 标准包装 |
| 输入数目和类型： | 8 个单端，单极 |
| 其它名称： | AD7298-1BCPZ-RLDKR |
AD7298-1
Rev. A | Page 16 of 24
MODES OF OPERATION
The AD7298-1 offers different modes of operation that are
designed to provide additional flexibility for the user. These
options can be chosen by programming the content of the
control register to select the desired mode.
TRADITIONAL MULTICHANNEL MODE OF
OPERATION
The AD7298-1 can operate as a traditional multichannel ADC,
where each serial transfer selects the next channel for conversion.
One must write to the control register to configure and select
the desired input channel prior to initiating any conversions. In
the traditional mode of operation, the CS signal is used to frame
the first write to the converter on the DIN pin. In this mode of
operation, the REPEAT bit in the control register is set to a low
logic level (0), therefore the REPEAT function is not in use. The
data, which appears on the DOUT pin during the initial write to
the control register, is invalid. The first CS falling edge initiates a
write to the control register to configure the device; a conversion is
then initiated for the selected analog input channel (VIN0) on the
subsequent (second) CS falling edge; and the third CS falling edge
will have the result (VIN2) available for reading. The AD7298-1
operates with one cycle latency, therefore the conversion result
corresponding to each conversion is available one serial read
cycle after the cycle in which the conversion was initiated.
As the device operates with one cycle latency, the control
register configuration sets up the configuration for the next
conversion, which is initiated on the next CS falling edge, but
the first bit of the corresponding result is not clocked out until
the subsequent falling CS edge, as shown in Figure 23.
If more than one channel is selected in the control register, the
AD7298-1 converts all selected channels sequentially in ascending
order on successive CS falling edges. Once all the selected channels
in the control register are converted, the AD7298-1 ceases converting
until the user rewrites to the control register to select the next
channel for conversion. This operation is shown in Figure 24.
DOUT returns all 1s if the sequence of conversions is completed or
if no channel is selected.
CS
SCLK
DOUT
DIN
1
10
16
1
16
1
16
1
16
CONVERSION RESULT
FOR CHANNEL 4
CONVERSION RESULT
FOR CHANNEL 1
INVALID DATA
DATA WRITTEN TO CONTROL
REGISTER CHANNEL 4 SELECTED
DATA WRITTEN TO CONTROL
REGISTER CHANNEL 1 SELECTED
NO WRITE TO THE
CONTROL REGISTER
NO WRITE TO THE
CONTROL REGISTER
09321-
009
Figure 23. Configuring a Conversion and Read with the AD7298-1, One Channel Selected for Conversion
CS
SCLK
DOUT
DIN
1
10
16
1
16
1
16
CONVERSION RESULT
FOR CHANNEL 1
CONVERSION RESULT
FOR CHANNEL 5
CONVERSION RESULT
FOR CHANNEL 2
INVALID DATA
NO WRITE TO THE
CONTROL REGISTER
NO WRITE TO THE
CONTROL REGISTER
NO WRITE TO THE
CONTROL REGISTER
DATA WRITTEN TO CONTROL
REGISTER CH 1 AND 2 SELECTED
CS
SCLK
DOUT
DIN
1
16
1
16
DATA WRITTEN TO CONTROL
REGISTER CHANNEL 5 SELECTED
09321-
010
Figure 24. Configuring a Conversion and Read with the AD7298-1, Numerous Channels Selected for Conversion
相关PDF资料 |
PDF描述 |
|---|---|
| AD7298BCPZ-RL7 | IC ADC 10BIT SPI/SRL 8CH 20LFCSP |
| AD7302BRUZ-REEL7 | IC DAC 8BIT DUAL R-R 20-TSSOP |
| AD7303BRM | IC DAC 8BIT DUAL R-R 8-MSOP |
| AD7305BRU | IC DAC 8BIT QUAD R-R 20-TSSOP |
| AD7321BRUZ-REEL7 | IC ADC 12BIT+ SAR 2CHAN 14TSSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD7298BCPZ | 功能描述:IC ADC 12BIT SPI/SRL 1M 20LFCSP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1 系列:microPOWER™ 位数:8 采样率（每秒）:1M 数据接口:串行，SPI? 转换器数目:1 功率耗散（最大）:- 电压电源:模拟和数字 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:24-VFQFN 裸露焊盘 供应商设备封装:24-VQFN 裸露焊盘（4x4） 包装:Digi-Reel® 输入数目和类型:8 个单端，单极 产品目录页面:892 (CN2011-ZH PDF) 其它名称:296-25851-6 |
| AD7298BCPZ-RL7 | 功能描述:IC ADC 10BIT SPI/SRL 8CH 20LFCSP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:16 采样率（每秒）:45k 数据接口:串行 转换器数目:2 功率耗散（最大）:315mW 电压电源:模拟和数字 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:28-SOIC（0.295"，7.50mm 宽） 供应商设备封装:28-SOIC W 包装:带卷 (TR) 输入数目和类型:2 个单端，单极 |
| AD73 | 制造商:Distributed By MCM 功能描述:REFRIGERATR DOOR GASKET DIRECT |
| AD7302 | 制造商:AD 制造商全称:Analog Devices 功能描述:2.7 V to 5.5 V, Parallel Input Dual Voltage Output 8-Bit DAC |
| AD7302BN | 功能描述:IC DAC 8BIT DUAL R-R 20-DIP RoHS:否 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:- 标准包装:2,400 系列:- 设置时间:- 位数:18 数据接口:串行 转换器数目:3 电压电源:模拟和数字 功率耗散（最大）:- 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:36-TFBGA 供应商设备封装:36-TFBGA 包装:带卷 (TR) 输出数目和类型:* 采样率（每秒）:* |
发布紧急采购，3分钟左右您将得到回复。