- 您现在的位置：买卖IC网 > PDF目录10681 > AD7298BCPZ (Analog Devices Inc)IC ADC 12BIT SPI/SRL 1M 20LFCSP PDF资料下载
参数资料
| 型号： | AD7298BCPZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 14/25页 |
| 文件大小： | 0K |
| 描述： | IC ADC 12BIT SPI/SRL 1M 20LFCSP |
| 特色产品： | AD7298 ADC with Temperature Sensor |
| 标准包装： | 1 |
| 位数： | 12 |
| 采样率（每秒）： | 1M |
| 数据接口： | DSP，串行，SPI? |
| 转换器数目： | 1 |
| 功率耗散（最大）： | 22.7mW |
| 电压电源： | 单电源 |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 20-WFQFN 裸露焊盘，CSP |
| 供应商设备封装： | 20-LFCSP-WQ（4x4） |
| 包装： | 托盘 |
| 输入数目和类型： | 8 个单端，单极 |
AD7298
Rev. B | Page 20 of 24
Full Power-Down Mode
In this mode, all internal circuitry on the AD7298 is powered
down and no information is retained in the control register or any
other internal register. If the averaging feature for the tempera-
ture sensor is enabled in the control register (TSENSEAVG), the
averaging is reset once the device enters power-down mode.
The AD7298 is placed into full power-down mode by bringing
the logic level on the PD/RST pin low for greater than 100 ns.
When placing the AD7298 in full power-down mode, the ADC
inputs must return to 0 V. The PD/RST pin is asynchronous to
the clock, thus it can be triggered at any time. The part can be
powered up for normal operation by bringing the PD/RST pin
logic level back to a high logic state.
The full power-down feature can be used to reduce the average
power consumed by the AD7298 when operating at lower
throughput rates. The user should ensure that tPOWER_UP has
elapsed prior to programming the control register and initiating
a valid conversion.
POWERING UP THE AD7298
The AD7298 contains a power-on reset circuit, which sets
the control register to its default setting of all zeros, thus the
internal reference is enabled and the device is configured for the
normal mode of operation. On power-up, the internal reference
is by default enabled, which takes up 6 ms (maximum) to
power-up.
If an external reference is being used, the user does not need to
wait for the internal reference to power-up fully. The AD7298
digital interface is fully functional after 500 μs from initial
power-up. Therefore, the user can write to the control register
after 500 μs to switch to external reference mode. The AD7298
is then immediately ready to convert once the external reference
is available on the VREF pin.
When supplies are first applied to the AD7298, the user must
wait the specified 500 μs before programming the control
register to select the desired channels for conversion.
RESET
The AD7298 includes a reset feature that can be used to reset
the device and the contents of all internal registers, including
the control register, to their default state.
To activate the reset operation, the PD/RST pin should be
brought low for no longer than 100 ns. It is asynchronous with
the clock, thus it can be triggered at any time. If the PD/RST pin
is held low for greater than 100 ns, the part enters full power-
down mode. It is imperative that the PD/RST pin be held at a
stable logic level at all times to ensure normal operation.
相关PDF资料 |
PDF描述 |
|---|---|
| VI-24W-MY-B1 | CONVERTER MOD DC/DC 5.5V 50W |
| VE-JWD-MY-F3 | CONVERTER MOD DC/DC 85V 50W |
| VI-23Z-MY-B1 | CONVERTER MOD DC/DC 2V 20W |
| AD7887WARMZ | IC ADC 12BIT 2CH SRL 8-MSOP |
| VI-23Y-MX-B1 | CONVERTER MOD DC/DC 3.3V 49.5W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD7298BCPZ-RL7 | 功能描述:IC ADC 10BIT SPI/SRL 8CH 20LFCSP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:16 采样率（每秒）:45k 数据接口:串行 转换器数目:2 功率耗散（最大）:315mW 电压电源:模拟和数字 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:28-SOIC（0.295"，7.50mm 宽） 供应商设备封装:28-SOIC W 包装:带卷 (TR) 输入数目和类型:2 个单端，单极 |
| AD73 | 制造商:Distributed By MCM 功能描述:REFRIGERATR DOOR GASKET DIRECT |
| AD7302 | 制造商:AD 制造商全称:Analog Devices 功能描述:2.7 V to 5.5 V, Parallel Input Dual Voltage Output 8-Bit DAC |
| AD7302BN | 功能描述:IC DAC 8BIT DUAL R-R 20-DIP RoHS:否 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:- 标准包装:2,400 系列:- 设置时间:- 位数:18 数据接口:串行 转换器数目:3 电压电源:模拟和数字 功率耗散（最大）:- 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:36-TFBGA 供应商设备封装:36-TFBGA 包装:带卷 (TR) 输出数目和类型:* 采样率（每秒）:* |
| AD7302BNZ | 功能描述:IC DAC 8BIT DUAL R-R 20-DIP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:50 系列:- 设置时间:4µs 位数:12 数据接口:串行 转换器数目:2 电压电源:单电源 功率耗散（最大）:- 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-TSSOP，8-MSOP（0.118"，3.00mm 宽） 供应商设备封装:8-uMAX 包装:管件 输出数目和类型:2 电压，单极 采样率（每秒）:* 产品目录页面:1398 (CN2011-ZH PDF) |
发布紧急采购，3分钟左右您将得到回复。