参数资料
| 型号： | AD7303BRM |
| 厂商： | Analog Devices Inc |
| 文件页数： | 6/16页 |
| 文件大小： | 0K |
| 描述： | IC DAC 8BIT DUAL R-R 8-MSOP |
| 产品培训模块： | Data Converter Fundamentals DAC Architectures |
| 标准包装： | 50 |
| 设置时间： | 1.2µs |
| 位数： | 8 |
| 数据接口： | 串行 |
| 转换器数目： | 2 |
| 电压电源： | 单电源 |
| 功率耗散（最大）： | 6.93mW |
| 工作温度： | -40°C ~ 105°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-TSSOP，8-MSOP（0.118"，3.00mm 宽） |
| 供应商设备封装： | 8-MSOP |
| 包装： | 管件 |
| 输出数目和类型： | 2 电压，单极；2 电压，双极 |
| 采样率（每秒）： | 833k |
AD7303
–14–
REV. 0
AD7303 to 68HC11 Interface Program Source Code
*
PORTC
EQU
$1003
Port C Control Register
*
"SYNC, 0, 0, 0, 0, 0, 0, 0"
DDRC
EQU
$1007
Port C Data Direction
PORTD
EQU
$1008
Port D Data Register
*
"0, 0, 0, SCLK, DIN, 0, 0, 0"
DDRD
EQU
$1009
Port D Data Direction
SPCR
EQU
$1028
SPI Control Register
*
"SPIE, SPE, DWOM, MSTR, CPOL, CPHA, SPR1, SPR0"
SPSR
EQU
$1029
SPI Status Register
*
"SPIF, WCOL, 0, MODF, 0, 0, 0, 0"
SPDR
EQU
$102A
SPI Data Register, Read Buffer, Write Shifter
*
* SDI RAM Variables:
DIN 1 is eight MSBs, Control BYTE
DIN 2 is eight LSBs, Data BYTE
DAC requires 2*8-bit Writes
DIN1
EQU
$00
DIN BYTE 1: " INT/EXT, X, LDAC, PDB, PBA, A/B, CR1, CR0"
DIN2
EQU
$01
DIN BYTE 2: " DB7, DB6, DB5, DB4, DB3, DB2, DB1, DB0"
*
ORG
$C000
Start of users ram
INIT
LDS
#$CFFF
Top of C page Ram
*
LDAA
#$80
1, 0, 0, 0, 0, 0, 0, 0
*
SYNC is High
STAA
PORTC
Initialize Port C Outputs
LDAA
#$80
1, 0, 0, 0, 0, 0, 0, 0
STAA
DDRC
SYNC enabled as output
*
LDAA
#$00
0, 0, 0, 0, 0, 0, 0, 0
*
SCLK is low, DIN is low
STAA
PORTD
Initialize Port D outputs
Power Supply Bypassing and Grounding
In any circuit where accuracy is important, careful consideration
of the power supply and ground return layout helps to ensure
the rated performance. The printed circuit board on which the
AD7303 is mounted should be designed so that the analog and
digital sections are separated, and confined to certain areas of
the board. If the AD7303 is in a system where multiple
devices require an AGND to DGND connection, the connec-
tion should be made at one point only. The star ground point
should be established as closely as possible to the AD7303. The
AD7303 should have ample supply bypassing of 10
F in paral-
lel with 0.1
F on the supply located as closely to the package as
possible, ideally right up against the device. The 10
F capaci-
tors are the tantalum bead type. The 0.1
F capacitor should
have low Effective Series Resistance (ESR) and Effective Series
Inductance (ESI), like the common ceramic types that provide a
low impedance path to ground at high frequencies to handle
transient currents due to internal logic switching.
The power supply lines of the AD7303 should use as large a
trace as possible to provide low impedance paths and reduce the
effects of glitches on the power supply line. Fast switching sig-
nals such as clocks should be shielded with digital ground to
avoid radiating noise to other parts of the board, and should
never be run near the reference inputs. Avoid crossover of digi-
tal and analog signals. Traces on opposite sides of the board
should run at right angles to each other. This reduces the effects of
feedthrough through the board. A microstrip technique is by far
the best, but not always possible with a double-sided board. In
this technique, the component side of the board is dedicated to
ground plane while signal traces are placed on the solder side.
相关PDF资料 |
PDF描述 |
|---|---|
| AD7305BRU | IC DAC 8BIT QUAD R-R 20-TSSOP |
| AD7321BRUZ-REEL7 | IC ADC 12BIT+ SAR 2CHAN 14TSSOP |
| AD7322BRUZ-REEL7 | IC ADC 12BIT+ SAR 2CHAN 14TSSOP |
| AD7323BRUZ-REEL7 | IC ADC 12BIT+ SAR 4CHAN 16TSSOP |
| AD7324BRUZ-REEL | IC ADC 12BIT+SAR 4CHAN 16-TSSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD7303BRM-REEL | 制造商:Analog Devices 功能描述:DAC 2-CH Current Steering 8-bit 8-Pin MSOP T/R 制造商:Analog Devices 功能描述:DAC 2CH CURRENT STEERING 8BIT 8MSOP - Tape and Reel 制造商:Rochester Electronics LLC 功能描述:DUAL SERIAL 8-BIT SINGLE SUPPLY DAC I.C. - Tape and Reel |
| AD7303BRM-REEL7 | 功能描述:IC DAC 8BIT DUAL R-R 8-MSOP T/R RoHS:否 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:- 标准包装:2,400 系列:- 设置时间:- 位数:18 数据接口:串行 转换器数目:3 电压电源:模拟和数字 功率耗散（最大）:- 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:36-TFBGA 供应商设备封装:36-TFBGA 包装:带卷 (TR) 输出数目和类型:* 采样率（每秒）:* |
| AD7303BRMZ | 功能描述:IC DAC 8BIT DUAL R-R 8-MSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:50 系列:- 设置时间:4µs 位数:12 数据接口:串行 转换器数目:2 电压电源:单电源 功率耗散（最大）:- 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-TSSOP，8-MSOP（0.118"，3.00mm 宽） 供应商设备封装:8-uMAX 包装:管件 输出数目和类型:2 电压，单极 采样率（每秒）:* 产品目录页面:1398 (CN2011-ZH PDF) |
| AD7303BRMZ-REEL | 功能描述:IC DAC 8BIT DUAL R-R 8-MSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:- 产品培训模块:LTC263x 12-, 10-, and 8-Bit VOUT DAC Family 特色产品:LTC2636 - Octal 12-/10-/8-Bit SPI VOUT DACs with 10ppm/°C Reference 标准包装:91 系列:- 设置时间:4µs 位数:10 数据接口:MICROWIRE?，串行，SPI? 转换器数目:8 电压电源:单电源 功率耗散（最大）:2.7mW 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:14-WFDFN 裸露焊盘 供应商设备封装:14-DFN-EP（4x3） 包装:管件 输出数目和类型:8 电压，单极 采样率（每秒）:* |
| AD7303BRMZ-REEL7 | 功能描述:IC DAC 8BIT DUAL R-R 8-MSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数模转换器 系列:- 产品培训模块:LTC263x 12-, 10-, and 8-Bit VOUT DAC Family 特色产品:LTC2636 - Octal 12-/10-/8-Bit SPI VOUT DACs with 10ppm/°C Reference 标准包装:91 系列:- 设置时间:4µs 位数:10 数据接口:MICROWIRE?，串行，SPI? 转换器数目:8 电压电源:单电源 功率耗散（最大）:2.7mW 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:14-WFDFN 裸露焊盘 供应商设备封装:14-DFN-EP（4x3） 包装:管件 输出数目和类型:8 电压，单极 采样率（每秒）:* |
发布紧急采购，3分钟左右您将得到回复。