- 您现在的位置：买卖IC网 > PDF目录10664 > AD7357BRUZ (Analog Devices Inc)IC ADC DUAL14BIT 4.2MSPS 16TSSOP PDF资料下载
参数资料
| 型号： | AD7357BRUZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 13/21页 |
| 文件大小： | 0K |
| 描述： | IC ADC DUAL14BIT 4.2MSPS 16TSSOP |
| 设计资源： | DC-Coupled, Single-Ended-to-Differential Conversion Using AD8138 and AD7357 (CN0061) |
| 标准包装： | 1 |
| 位数： | 14 |
| 采样率（每秒）： | 4.2M |
| 数据接口： | DSP，MICROWIRE?，QSPI?，串行，SPI? |
| 转换器数目： | 2 |
| 功率耗散（最大）： | 59mW |
| 电压电源： | 单电源 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-TSSOP（0.173"，4.40mm 宽） |
| 供应商设备封装： | 16-TSSOP |
| 包装： | 管件 |
| 输入数目和类型： | 2 个差分，双极 |
| 产品目录页面： | 777 (CN2011-ZH PDF) |
AD7357
Rev. B | Page 19 of 20
APPLICATION HINTS
GROUNDING AND LAYOUT
The analog and digital supplies to the AD7357 are independent
and separately pinned out to minimize coupling between the
analog and digital sections of the device. The printed circuit
board (PCB) that houses the AD7357 should be designed so
that the analog and digital sections are separated and confined
to certain areas of the board. This design facilitates the use of
ground planes that can be easily separated.
To provide optimum shielding for ground planes, a minimum
etch technique is generally best. The two AGND pins of the
AD7357 should be sunk in the AGND plane. Digital and analog
ground plans should be joined in only one place. If the AD7357
is in a system where multiple devices require an AGND and
DGND connection, the connection should still be made at one
point only. A star ground point should be established as close as
possible to the ground pins on the AD7357.
Avoid running digital lines under the device because this couples
noise onto the die. The analog ground planes should be allowed
to run under the AD7357 to avoid noise coupling. The power
supply lines to the AD7357 should use as large a trace as poss-
ible to provide low impedance paths and reduce the effects of
glitches on the power supply line.
To avoid radiating noise to other sections of the board, fast
switching signals such as clocks should be shielded with
digital ground, and clock signals should never run near the
analog inputs. Avoid crossover of digital and analog signals.
To reduce the effects of feedthrough within the board, traces
on opposite sides of the board should run at right angles to
each other. A microstrip technique is the best method, but
it is not always possible with a double-sided board. In this
technique, the component side of the board is dedicated to
ground planes, while signals are placed on the solder side.
Good decoupling is important; all supplies should be decoupled
with 10 μF tantalum capacitors in parallel with 0.1 μF capacitors
to GND. To achieve the best results from these decoupling compo-
nents, they must be placed as close as possible to the device,
ideally right up against the device. The 0.1 μF capacitor should
have low effective series resistance (ESR) and effective series
inductance (ESI), such as the common ceramic types or surface-
mount types. These low ESR and ESI capacitors provide a
low impedance path to ground at high frequencies to handle
transient currents due to logic switching.
EVALUATING THE AD7357 PERFORMANCE
The recommended layout for the AD7357 is outlined in eval-
uation board documentation. The evaluation board package
includes a fully assembled and tested evaluation board, docu-
mentation, and software for controlling the board from the PC
via the converter evaluation and development board (CED).
The CED can be used in conjunction with the AD7357 evalua-
tion board (as well as many other evaluation boards ending in
the ED designator from Analog Devices, Inc.) to demonstrate/
evaluate the ac and dc performance of the AD7357.
The software allows the user to perform ac (fast Fourier transform)
and dc (linearity) tests on the AD7357. The software and docu-
mentation are on a CD that is shipped with the evaluation board.
相关PDF资料 |
PDF描述 |
|---|---|
| AD7731BRZ | IC ADC 24BIT SIGMA-DELTA 24-SOIC |
| LTC2355IMSE-14#PBF | IC ADC 14BIT 3.5MSPS 10-MSOP |
| MAX9092AUA+T | IC COMPARATOR GP DUAL 8UMAX |
| VI-B13-MX-F4 | CONVERTER MOD DC/DC 24V 75W |
| LTC2356IMSE-14#PBF | IC ADC 14BIT 3.5MSPS 10-MSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD7357BRUZ-500RL7 | 功能描述:IC ADC DUAL14BIT 4.2MSPS 16TSSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:12 采样率（每秒）:300k 数据接口:并联 转换器数目:1 功率耗散（最大）:75mW 电压电源:单电源 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:24-SOIC（0.295"，7.50mm 宽） 供应商设备封装:24-SOIC 包装:带卷 (TR) 输入数目和类型:1 个单端，单极；1 个单端，双极 |
| AD7357BRUZ-RL | 功能描述:IC ADC 14BITDUAL 4.MSPS 16TSSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1,000 系列:- 位数:12 采样率（每秒）:300k 数据接口:并联 转换器数目:1 功率耗散（最大）:75mW 电压电源:单电源 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:24-SOIC（0.295"，7.50mm 宽） 供应商设备封装:24-SOIC 包装:带卷 (TR) 输入数目和类型:1 个单端，单极；1 个单端，双极 |
| AD7357WYRUZ | 制造商:Analog Devices 功能描述:ADC Dual SAR 4.2Msps 14-bit Serial 16-Pin TSSOP 制造商:Analog Devices 功能描述:14-BIT DUAL DIFF SIMULT 5 MSPS ADC I.C. - Rail/Tube 制造商:Rochester Electronics LLC 功能描述: 制造商:Analog Devices 功能描述:IC ADC 14BIT SRL 5MSPS 16TSSOP 制造商:Analog Devices 功能描述:Analog to Digital Converters - ADC 14-Bit Dual Diff Simult 5 MSPS 制造商:Analog Devices 功能描述:14-Bit Dual Diff Simult 5 MSPS ADC I.C. |
| AD7357WYRUZ-RL | 功能描述:模数转换器 - ADC 14-Bit Dual Diff Simult 5 MSPS RoHS:否 制造商:Analog Devices 通道数量: 结构: 转换速率: 分辨率: 输入类型: 信噪比: 接口类型: 工作电源电压: 最大工作温度: 安装风格: 封装 / 箱体: |
| AD7357YRUZ | 功能描述:IC ADC DUAL14BIT 4.2MSPS 16TSSOP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:- 标准包装:1 系列:- 位数:14 采样率（每秒）:83k 数据接口:串行，并联 转换器数目:1 功率耗散（最大）:95mW 电压电源:双 ± 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:28-DIP（0.600"，15.24mm） 供应商设备封装:28-PDIP 包装:管件 输入数目和类型:1 个单端，双极 |
发布紧急采购，3分钟左右您将得到回复。