参数资料
| 型号： | AD760AQ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 10/12页 |
| 文件大小： | 0K |
| 描述： | IC DAC 16BIT W/AMP SRL 28-CDIP |
| 产品培训模块： | Data Converter Fundamentals DAC Architectures |
| 标准包装： | 1 |
| 系列： | DACPORT® |
| 设置时间： | 6µs |
| 位数： | 16 |
| 数据接口： | 串行，并联 |
| 转换器数目： | 1 |
| 电压电源： | 双 ± |
| 功率耗散（最大）： | 725mW |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 通孔 |
| 封装/外壳： | 28-CDIP（0.600"，15.24mm） |
| 供应商设备封装： | 28-CDIP |
| 包装： | 管件 |
| 输出数目和类型： | 2 电压，单极；2 电压，双极 |
| 采样率（每秒）： | 167k |
| 产品目录页面： | 781 (CN2011-ZH PDF) |
AD760
REV. A
–7–
CALIBRATED LINEARITY PERFORMANCE
The cumulative probability plots for the AD760 INL and DNL
shown in Figures 3 and 4 represent the maximum absolute-
value (peak) linearity error for each part. Roughly 100 parts
from each of 3 wafer lots were used.
The calibrated DNL and INL performance for the sample
populations shown also represent the expected performance for
a single part calibrated often. There is essentially no difference
between the expected performance of many parts calibrated
once and one part calibrated often. The AD760 calibrated per-
formance is guaranteed at any temperature within the operating
temperature range. The peak nonlinearity for the sample popu-
lations shown are also representative of the expected maximum
linearity errors of a single part recalibrated at temperature.
40
30
20
10
0
40
20
0
60
80
100
CUMULATIVE
PROBABILITY
–
%
COUNT
0
0.125
0.25
0.375
0.5
0.625
0.75
16-BIT LSB
Figure 3. AD760 Peak INL
40
30
20
10
0
40
20
0
60
80
100
CUMULATIVE
PROBABILITY
–
%
COUNT
0
0.125
0.25
0.375
0.5
16-BIT LSB
50
Figure 4. AD760 Peak DNL
ANALOG CIRCUIT CONNECTIONS
Internal scaling resistors provided in the AD760 may be con-
nected to produce a unipolar output range of 0 V to +10 V or a
bipolar output range of –10 V to +10 V. Gain and offset drift
are minimized in the AD760 because of the thermal tracking of
the scaling resistors with other device components.
UNIPOLAR CONFIGURATION
The configuration shown in Figure 5a will provide a unipolar
0 V to +10 V output range. In this mode a 50 resistor is tied
between REF OUT (Pin 26) and REF IN (Pin 25). It is pos-
sible to use the AD760 without any external components by
tying Pin 26 directly to Pin 25. Eliminating this resistor will
increase the gain error by 0.50% of FSR.
SPAN/BIP OFF
VOUT
23
24
+10V REF
25
MAIN DAC
REFOUT
26
REFIN
50
10k
10k
9.95k
AD760
Figure 5a. 0 V to +10 V Unipolar Voltage Output
If it is desired to adjust the gain error to zero, this can be ac-
complished using the circuit shown in Figure 5b. The adjust-
ment procedure is as follows:
STEP 1 . . . OFFSET ADJUST
Initiate calibration sequence. CALOK (Pin 1) must remain high
throughout Gain Adjust.
STEP 2 . . . GAIN ADJUST
Turn all bits ON and adjust gain trimmer, R1, until the output
is 9.999847 volts. (Full scale is adjusted to 1 LSB less than the
nominal full scale of 10.000000 volts.)
SPAN/BIP OFF
VOUT
23
24
+10V REF
25
MAIN DAC
REFOUT
26
REFI N
R1
100
10k
10k
9.95k
AD760
Figure 5b. 0 V to +10 V Unipolar Voltage Output with
Gain Adjust
BIPOLAR CONFIGURATION
The circuit shown in Figure 6a will provide a bipolar output
voltage from –10.000000 V to +9.999694 V with positive full
scale occurring with all bits ON. As in the unipolar mode, resis-
tor R1 may be eliminated altogether to provide AD760 bipolar
operation without any external components. Eliminating this
resistor will increase the gain error by 0.50% of FSR in the
bipolar mode.
相关PDF资料 |
PDF描述 |
|---|---|
| AD766AN | IC DAC 16BIT W/REF DSP 16-DIP |
| AD767BD | IC DAC 12BIT W/AMP 24-CDIP |
| AD768AR | IC DAC 16BIT 30MSPS 28-SOIC |
| AD7724ASTZ | IC MOD SIGMA-DELTA DUAL 48LQFP |
| AD7729ARU | IC ADC 15BIT DUAL W/DAC 28-TSSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD760SQ | 制造商:未知厂家 制造商全称:未知厂家 功能描述:16-Bit Digital-to-Analog Converter |
| AD7610 | 制造商:AD 制造商全称:Analog Devices 功能描述:14-Bit, 1 MSPS, Differential, Programmable Input PulSAR ADC |
| AD7610ACP | 制造商:Analog Devices 功能描述:500KSPS 16-BIT ADC S/W PROG. INPUT RANGES - Bulk |
| AD7610AST | 制造商:Analog Devices 功能描述:500KSPS 16-BIT ADC S/W PROG. INPUT RANGES - Bulk |
| AD7610BCPZ | 功能描述:IC ADC 16BIT 250KSPS 48-LFCSP RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:PulSAR® 标准包装:1 系列:- 位数:14 采样率（每秒）:83k 数据接口:串行，并联 转换器数目:1 功率耗散（最大）:95mW 电压电源:双 ± 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:28-DIP（0.600"，15.24mm） 供应商设备封装:28-PDIP 包装:管件 输入数目和类型:1 个单端，双极 |
发布紧急采购，3分钟左右您将得到回复。