参数资料
型号: AD843JRZ-16-REEL7
厂商: Analog Devices Inc
文件页数: 3/12页
文件大小: 0K
描述: IC OPAMP GP 34MHZ 50MA 16SOIC
标准包装: 250
放大器类型: 通用
电路数: 1
转换速率: 250 V/µs
增益带宽积: 34MHz
电流 - 输入偏压: 50pA
电压 - 输入偏移: 1000µV
电流 - 电源: 12mA
电流 - 输出 / 通道: 50mA
电压 - 电源,单路/双路(±): ±4.5 V ~ 18 V
工作温度: 0°C ~ 70°C
安装类型: 表面贴装
封装/外壳: 16-SOIC(0.295",7.50mm 宽)
供应商设备封装: 16-SOIC W
包装: 带卷 (TR)
AD843
REV. D
–11–
MEASURING AD843 SETTLING TIME
Figure 28 shows the dynamic response of the AD843 while op-
erating in the settling time test circuit of Figure 27. The input of
the settling time fixture is driven by a flat-top pulse generator.
The error signal output from A1, the AD843 under test, is am-
plified by op amp A2 and then clamped by two high speed
Schottky diodes.
Figure 28. Settling Characteristics: +10 V to 0 V Step.
Upper Trace: Amplified Error Voltage (0.01%/Div)
Lower Trace: Output of AD843 Under Test (5 V/Div)
The error signal is clamped to prevent it from greatly overload-
ing the oscilloscope preamp. A Tektronix oscilloscope preamp
type 7A26 was chosen because it will recover from the approxi-
mately 0.4 volt overload, quickly enough to allow accurate mea-
surement of the AD843’s 135 ns settling time. Amplifier A2 is a
very high speed op amp; it provides a voltage gain of 10, provid-
ing a total gain of 5 from the error signal to the oscilloscope input.
A FAST PEAK DETECTOR CIRCUIT
The peak detector circuit of Figure 29, can accurately capture
the amplitude of input pulses as narrow as 200 ns and can hold
their value with a droop rate of less than 20
V/s. This circuit
will capture the peak value of positive polarity waveforms; to
detect negative peaks, simply reverse the polarity of the two
diodes.
The high bandwidth and 200 V/
s slew rate of amplifier A2, an
AD843, allows the detector’s output to “keep up” with its input
thus minimizing overshoot. The low (<1 nA) input current of
the AD843 ensures that the droop rate is limited only by the
reverse leakage of diode D2, which is typically <10 nA for the
type shown. The low droop rate is apparent in Figure 30. The
detector’s output (top trace) loses slightly over a volt of the
8 volt peak input value (bottom trace) in 75 ms, or a rate of
approximately 16
V/s.
Figure 30. Peak Detector Response to 125 Hz Pulse Train
Figure 31. Peak Capture Time
Amplifier A1, an AD847, can drive 680 pF hold capacitor, CP,
fast enough to “catch-up” with the next peak in 100 ns and still
settle to the new value in 250 ns, as illustrated in Figure 31.
Reducing the value of capacitor CP to 100 pF will maximize the
speed of this circuit at the expense of increased overshoot and
droop. Since the AD847 can drive an arbitrarily large value of
capacitance, CP can be increased to reduce droop, at the expense
of response time.
Figure 29. A Fast Peak Detector Circuit
相关PDF资料
PDF描述
LTC1100CSW IC INSTRMNT AMP CHOP-STBL 16SOIC
DF3-9P-2DS CONN HEADER 9POS 2MM RT ANG TIN
AD8330ACPZ-R2 IC AMP VGA 150MHZ LN LP 16LFCSP
LT1168AIS8#TRPBF IC AMP INSTR PROG PREC LP 8SOIC
DF3-8P-2DS CONN HEADER 8POS 2MM RT ANG TIN
相关代理商/技术参数
参数描述
AD843K 制造商:AD 制造商全称:Analog Devices 功能描述:34 MHz, CBFET Fast Settling Op Amp
AD843KN 制造商:Analog Devices 功能描述:OP Amp Single GP ±18V 8-Pin PDIP 制造商:Analog Devices 功能描述:AMPLIFIER IC NUMBER OF CIRCUITS:1
AD843KNZ 功能描述:IC OPAMP GP 34MHZ 50MA 8DIP RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:2,500 系列:- 放大器类型:通用 电路数:4 输出类型:- 转换速率:0.6 V/µs 增益带宽积:1MHz -3db带宽:- 电流 - 输入偏压:45nA 电压 - 输入偏移:2000µV 电流 - 电源:1.4mA 电流 - 输出 / 通道:40mA 电压 - 电源,单路/双路(±):3 V ~ 32 V,±1.5 V ~ 16 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:14-TSSOP(0.173",4.40mm 宽) 供应商设备封装:14-TSSOP 包装:带卷 (TR) 其它名称:LM324ADTBR2G-NDLM324ADTBR2GOSTR
AD843KNZ 制造商:Analog Devices 功能描述:IC OP-AMP FAT SETTLING
AD843S 制造商:AD 制造商全称:Analog Devices 功能描述:34 MHz, CBFET Fast Settling Op Amp