参数资料
型号: ADC0804
厂商: National Semiconductor Corporation
元件分类: 串行ADC
英文描述: 8-BitμP Compatible A/D Converters(8位μP 兼容A/D转换器)
中文描述: 8BitμP兼容的A / D转换器(8位微处理器兼容的A / D转换器)
文件页数: 29/41页
文件大小: 1118K
代理商: ADC0804
Functional Description
(Continued)
ing I/O input instructions. For example, MUX channel selec-
tion for the A/D can be accomplished with this operating
mode.
4.3 Interfacing 6800 Microprocessor Derivatives
(6502, etc.)
The control bus for the 6800 microprocessor derivatives
does not use the RD and WR strobe signals. Instead it em-
ploys a single R/W line and additional timing, if needed, can
be derived fom the
φ
2 clock. All I/O devices are memory
mapped in the 6800 system, and a special signal, VMA, indi-
cates that the current address is valid. Figure 15 shows an
interface schematic where the A/D is memory mapped in the
6800 system. For simplicity, the CS decoding is shown using
1
2
DM8092. Note that in many 6800 systems, an already de-
coded 4/5 line is brought out to the common bus at pin 21.
This can be tied directly to the CS pin of the A/D, provided
that no other devices are addressed at HX ADDR: 4XXX or
5XXX.
The following subroutine performs essentially the same func-
tion as in the case of the 8080Ainterface and it can be called
from anywhere in the user’s program.
In Figure 16 the ADC0801 series is interfaced to the M6800
microprocessor through (the arbitrarily chosen) Port B of the
MC6820 or MC6821 Peripheral Interface Adapter, (PIA).
Here the CS pin of the A/D is grounded since the PIA is al-
ready memory mapped in the M6800 system and no CS de-
coding is necessary. Also notice that the A/D output data
lines are connected to the microprocessor bus under pro-
gram control through the PIA and therefore the A/D RD pin
can be grounded.
Asample interface program equivalent to the previous one is
shown below Figure 16 The PIA Data and Control Registers
of Port B are located at HEX addresses 8006 and 8007, re-
spectively.
5.0 GENERAL APPLICATIONS
The following applications show some interesting uses for
the A/D. The fact that one particular microprocessor is used
is not meant to be restrictive. Each of these application cir-
cuits would have its counterpart using any microprocessor
that is desired.
5.1 Multiple ADC0801 Series to MC6800 CPU Interface
To transfer analog data from several channels to a single mi-
croprocessor system, a multiple converter scheme presents
several advantages over the conventional multiplexer
single-converter approach. With theADC0801 series, the dif-
ferential inputs allow individual span adjustment for each
channel. Furthermore, all analog input channels are sensed
simultaneously, which essentially divides the microproces-
sor’s total system servicing time by the number of channels,
since all conversions occur simultaneously. This scheme is
shown in Figure 17
DS005671-24
Note 20:
Numbers in parentheses refer to MC6800 CPU pin out.
Note 21:
Number or letters in brackets refer to standard M6800 system common bus code.
FIGURE 15. ADC0801-MC6800 CPU Interface
A
www.national.com
29
相关PDF资料
PDF描述
ADC0805LCN 8-Bit uP Compatible A/D Converters
ADC0801 8-Bit uP Compatible A/D Converters
ADC0802 8-Bit uP Compatible A/D Converters
ADC0802LCN 8-Bit uP Compatible A/D Converters
ADC0805 8-Bit uP Compatible A/D Converters
相关代理商/技术参数
参数描述
ADC0804/D DIE 制造商:Harris Corporation 功能描述:
ADC0804-1CD 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:CMOS 8-bit A/D converters
ADC0804-1CN 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:CMOS 8-bit A/D converters
ADC0804-1LCD 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:CMOS 8-bit A/D converters
ADC0804-1LCN 制造商:NXP Semiconductors 功能描述:Analog Digital Converter, Single, 8 Bit, 20 Pin, DIP