- 您现在的位置：买卖IC网 > Datasheet目录307 > ADE7761BARSZ-RL (Analog Devices Inc)IC ENERGY METERING 1PHASE 20SSOP Datasheet资料下载
参数资料
| 型号： | ADE7761BARSZ-RL |
| 厂商： | Analog Devices Inc |
| 文件页数： | 14/24页 |
| 文件大小： | 0K |
| 描述： | IC ENERGY METERING 1PHASE 20SSOP |
| 标准包装： | 1,500 |
| 输入阻抗： | 790 千欧 |
| 测量误差： | 0.1% |
| 电压 - 高输入/输出： | 2.4V |
| 电压 - 低输入/输出： | 0.8V |
| 电流 - 电源： | 3.65mA |
| 电源电压： | 4.75 V ~ 5.25 V |
| 测量仪表类型： | 单相 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 20-SSOP（0.209"，5.30mm 宽） |
| 供应商设备封装： | 20-SSOP |
| 包装： | 带卷 (TR) |
ADE7761B
ACTIVE POWER CALCULATION
The ADCs digitize the voltage signals from the current and
voltage transducers. A high-pass filter in the current channel
removes any dc component from the current signal. This eliminates
any inaccuracies in the active power calculation due to offsets in
the voltage or current signals (see the HPF and Offset Effects
section).
Power Factor Considerations
The method used to extract the active power information from
the instantaneous power signal (by low-pass filtering) is still valid
even when the voltage and current signals are not in phase.
Figure 23 displays the unity power factor condition and a
displacement power factor (DPF = 0.5), that is, current signal
lagging the voltage by 60°.
The active power calculation is derived from the instantaneous
power signal. The instantaneous power signal is generated by
a direct multiplication of the current and voltage signals.
To extract the active power component (dc component), the
instantaneous power signal is low-pass filtered. Figure 22 illustrates
the instantaneous active power signal and shows how the active
V×I
2
INSTANTANEOUS
POWER SIGNAL
INSTANTANEOUS
ACTIVE POWER SIGNAL
power information can be extracted by low-pass filtering the
instantaneous power signal. This scheme correctly calculates
active power for nonsinusoidal current and voltage waveforms
0V
CURRENT
VOLTAGE
at all power factors. All signal processing is carried out in the
digital domain for superior stability over temperature and time.
DIGITAL-TO-
INSTANTANEOUS
POWER SIGNAL
INSTANTANEOUS
ACTIVE POWER SIGNAL
CH1
PGA
ADC
HPF
FREQUENCY
F1
F2
V×I
2
× cos(60°)
0V
CH2
ADC
MULTIPLIER
LPF
DIGITAL-TO-
FREQUENCY
CF
VOLTAGE
60°
CURRENT
INSTANTANEOUS
POWER SIGNAL –p(t)
INSTANTANEOUS
ACTIVE POWER SIGNAL
Figure 23. Active Power Calculation over PF
If one assumes that the voltage and current waveforms are
v(t) = V × cos( ω t)
V×I
TIME
p(t) = i(t) × v(t)
WHERE:
V×I
i(t) = I × cos( ω t) 2
p(t) = V × I {1 + cos (2 ω t)}
2
sinusoidal, the active power component of the instantaneous
power signal (dc term) is given by
( V × I /2) × cos(60°)
This is the correct active power calculation.
Figure 22. Signal Processing Block Diagram
The low frequency output of the ADE7761B is generated by
accumulating this active power information. This low frequency
inherently means a long accumulation time between output
pulses. The output frequency is, therefore, proportional to the
average active power. This average active power information
can, in turn, be accumulated (for example, by a counter) to
Nonsinusoidal Voltage and Current
The active power calculation method also holds true for
nonsinusoidal current and voltage waveforms. All voltage
and current waveforms in practical applications have some
harmonic content. Using the Fourier transform, instantaneous
voltage and current waveforms can be expressed in terms of
their harmonic content.
v ( t ) = V O + 2 × ∑ V h × sin( h ω t + α h )
generate active energy information. Because of its high output
frequency and, therefore, shorter integration time, the CF
output is proportional to the instantaneous active power. This is
useful for system calibration purposes that take place under
steady load conditions.
∞
h ≠ 0
where:
v(t) is the instantaneous voltage.
V O is the average value.
(1)
V h is the rms value of Voltage Harmonic h.
α h is the phase angle of the voltage harmonic.
Rev. 0 | Page 14 of 24
相关PDF资料 |
PDF描述 |
|---|---|
| ADE7768ARZ-RL | IC ENERGY METERING 1PHASE 16SOIC |
| ADE7769ARZ-RL | IC ENERGY METERING 1PHASE 16SOIC |
| ADM8843ACPZ-REEL7 | IC LED DRVR WHITE BCKLGT 16LFCSP |
| ADP1653ACPZ-R7 | IC LED DRVR PHOTO FLASH 16-LFCSP |
| ADP1712-EVALZ | BOARD EVALUATION ADP1712 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADE7762 | 制造商:AD 制造商全称:Analog Devices 功能描述:Polyphase Energy Metering IC with Phase Drop Indication |
| ADE7762ARW | 制造商:AD 制造商全称:Analog Devices 功能描述:Polyphase Energy Metering IC with Phase Drop Indication |
| ADE7762ARW-RL | 制造商:AD 制造商全称:Analog Devices 功能描述:Polyphase Energy Metering IC with Phase Drop Indication |
| ADE7762ARWZ | 功能描述:IC ENERGY METERING 3PHASE 28SOIC RoHS:是 类别:集成电路 (IC) >> PMIC - 能量测量 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:* |
| ADE7762ARWZ-RL | 功能描述:IC ENERGY METERING 3PHASE 28SOIC RoHS:是 类别:集成电路 (IC) >> PMIC - 能量测量 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:* |
发布紧急采购，3分钟左右您将得到回复。