- 您现在的位置：买卖IC网 > Datasheet目录307 > ADE7761BARSZ-RL (Analog Devices Inc)IC ENERGY METERING 1PHASE 20SSOP Datasheet资料下载
参数资料
| 型号： | ADE7761BARSZ-RL |
| 厂商： | Analog Devices Inc |
| 文件页数： | 20/24页 |
| 文件大小： | 0K |
| 描述： | IC ENERGY METERING 1PHASE 20SSOP |
| 标准包装： | 1,500 |
| 输入阻抗： | 790 千欧 |
| 测量误差： | 0.1% |
| 电压 - 高输入/输出： | 2.4V |
| 电压 - 低输入/输出： | 0.8V |
| 电流 - 电源： | 3.65mA |
| 电源电压： | 4.75 V ~ 5.25 V |
| 测量仪表类型： | 单相 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 20-SSOP（0.209"，5.30mm 宽） |
| 供应商设备封装： | 20-SSOP |
| 包装： | 带卷 (TR) |
ADE7761B
Missing Neutral Gain Calibration
When the ADE7761B is in missing neutral mode, the energy is
billed based on the active current input signal level. The frequency
outputs in this mode can be calibrated with the MISCAL analog
input pin. In this mode, applying a dc voltage of 330 mV on
MISCAL is equivalent to applying, in normal mode, a pure sine
wave on the voltage input with a peak value of 330 mV. The
MISCAL input can vary from 0 V to 660 mV (see the Analog
Inputs section). When set to 0 V, the frequency outputs are
close to zero. When set to 660 mV dc, the frequency outputs are
twice that when MISCAL is at 330 mV dc. In other words,
Example
In normal mode, ac voltages of ±330 mV peak are applied to
Channel V1 and Channel V2, and then the expected output
frequency on F1 and F2 is calculated as follows:
Gain =1; PGA =0
F 1–4 = 1.7 Hz, SCF = S1 = S0 = 0
V1 = rms of 330 mV peak ac = 0.33/√2 V
V2 = rms of 330 mV peak ac = 0.33/√2 V
V REF = 2.5 V (nominal reference value)
Equation 7 can be used in missing neutral mode by replacing
V2 rms by MISCAL rms /√2.
F 1 , F 2 Frequency =
6 . 13 × 0 . 33 × 0 . 33 × 1 . 7 Hz
2 × 2 × 2 . 5 2
= 0 . 0917 Hz
F 1 , F 2 Frequency =
CF Frequency = F 1 , F 2 Frequency × 64 = 5.87 Hz
6 . 13 × Gain × V 1 rms × MISCAL rms / 2 × f 1 ? 4
V REF 2
where:
F 1 , F 2 Frequency is the output frequency on F1 and F2 (Hz).
Gain is 1 or 16, depending on the PGA gain selection made
(8)
In missing neutral mode, the ac voltage of ±330 mV peak is
applied to Channel V1, no signal is connected on Channel V2,
and a 330 mV dc input is applied to MISCAL. With the ADE7761B
in the same configuration as the previous example, the expected
output frequencies on CF, F1, and F2 are
using Logic Input PGA.
V1 rms is the differential rms voltage signal on Channel V1 (V).
MISCAL rms is the differential rms voltage signal on the MISCAL
F 1 , F 2 Frequency =
6 . 13 × 0 . 33 × 0 . 33 / 2 × 1 . 7 Hz
2 × 2 . 5 2
= 0 . 0917 Hz
pin (V).
V REF is the reference voltage (2.5 V ± 8%) (V).
f 1-4 is one of four possible frequencies selected by using Logic
Input S0 and Logic Input S1 (see Table 6).
Rev. 0 | Page 20 of 24
CF Frequency = F 1 , F 2 Frequency × 64 = 5.87 Hz
相关PDF资料 |
PDF描述 |
|---|---|
| ADE7768ARZ-RL | IC ENERGY METERING 1PHASE 16SOIC |
| ADE7769ARZ-RL | IC ENERGY METERING 1PHASE 16SOIC |
| ADM8843ACPZ-REEL7 | IC LED DRVR WHITE BCKLGT 16LFCSP |
| ADP1653ACPZ-R7 | IC LED DRVR PHOTO FLASH 16-LFCSP |
| ADP1712-EVALZ | BOARD EVALUATION ADP1712 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADE7762 | 制造商:AD 制造商全称:Analog Devices 功能描述:Polyphase Energy Metering IC with Phase Drop Indication |
| ADE7762ARW | 制造商:AD 制造商全称:Analog Devices 功能描述:Polyphase Energy Metering IC with Phase Drop Indication |
| ADE7762ARW-RL | 制造商:AD 制造商全称:Analog Devices 功能描述:Polyphase Energy Metering IC with Phase Drop Indication |
| ADE7762ARWZ | 功能描述:IC ENERGY METERING 3PHASE 28SOIC RoHS:是 类别:集成电路 (IC) >> PMIC - 能量测量 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:* |
| ADE7762ARWZ-RL | 功能描述:IC ENERGY METERING 3PHASE 28SOIC RoHS:是 类别:集成电路 (IC) >> PMIC - 能量测量 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:* |
发布紧急采购，3分钟左右您将得到回复。