参数资料
| 型号： | ADF4156BRUZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 7/24页 |
| 文件大小： | 0K |
| 描述： | IC PLL FRAC-N FREQ SYNTH 16TSSOP |
| 产品变化通告： | Improve Phase Noise Performance |
| 设计资源： | Low-Noise Microwave fractional-N PLL using active loop filter and RF prescaler (CN0174) |
| 标准包装： | 96 |
| 类型： | 分数 N 合成器（RF） |
| PLL： | 是 |
| 输入： | CMOS，TTL |
| 输出： | 时钟 |
| 电路数： | 1 |
| 比率 - 输入:输出： | 2:1 |
| 差分 - 输入:输出： | 是/无 |
| 频率 - 最大： | 6.2GHz |
| 除法器/乘法器： | 是/是 |
| 电源电压： | 2.7 V ~ 3.3 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-TSSOP（0.173"，4.40mm 宽） |
| 供应商设备封装： | 16-TSSOP |
| 包装： | 管件 |
| 产品目录页面： | 551 (CN2011-ZH PDF) |
Data Sheet
ADF4156
Rev. E | Page 15 of 24
FUNCTION REGISTER, R3
With the control bits (Bits[2:0]) of Register R2 set to 011, the
on-chip function register is programmed. Figure 20 shows the
input data format for programming this register.
Counter Reset
DB3 is the counter reset bit for the ADF4156. When this bit is
set to 1, the synthesizer counters are held in reset. For normal
operation, this bit should be 0.
Charge-Pump Three-State
When programmed to 1, DB4 puts the charge pump into three-
state mode. This bit should be set to 0 for normal operation.
Power-Down
DB5 on the ADF4156 provides the programmable power-down
mode. Setting this bit to 1 performs a power-down. Setting this
bit to 0 returns the synthesizer to normal operation. While in
software power-down mode, the part retains all information in
its registers. Only when supplies are removed are the register
contents lost.
When a power-down is activated, the following events occur:
1. The synthesizer counters are forced to their load state
conditions.
2. The charge pump is forced into three-state mode.
3. The digital lock detect circuitry is reset.
4. The RFIN input is debiased.
5. The input register remains active and capable of loading
and latching data.
Phase Detector Polarity
DB6 in the ADF4156 sets the phase detector polarity. When the
VCO characteristics are positive, this bit should be set to 1.
When the characteristics are negative, DB6 should be set to 0.
Note that the cycle slip reduction function cannot be used if the
phase detector polarity is set to negative.
Lock Detect Precision (LDP)
When DB7 is programmed to 0, the digital lock detect is set
high when the phase error on 40 consecutive phase detector
cycles is less than 10 ns each. When this bit is programmed to 1,
40 consecutive phase detector cycles of less than 6 ns each must
occur before the digital lock detect is set.
Σ-Δ Reset
For most applications, DB14 should be programmed to 0. When
DB14 is programmed to 0, the Σ-Δ modulator is reset to its starting
point, or starting phase word, on every write to Register R0. This
has the effect of producing consistent spur levels.
If it is not required that the Σ-Δ modulator be reset on each
write to Register R0, DB14 should be set to 1.
DB31 DB30 DB29 DB28 DB27 DB26 DB25 DB24 DB23 DB22 DB21 DB20 DB19 DB18 DB17 DB16 DB15 DB14 DB13 DB12 DB11 DB10 DB9 DB8 DB7 DB6 DB5 DB4 DB3 DB2
DB1
DB0
0
U12
0
U11 U10
U9
U8
U7
C3(0) C2(1) C1(1)
CONTROL
BITS
RESERVED
L
DP
Σ-
Δ
R
ESET
PD
P
OLA
R
ITY
PD
CP
T
HRE
E
-
S
TA
TE
CO
UNT
E
R
ESET
U11
LDP
0
10ns
1
6ns
U10
PD POLARITY
0
NEGATIVE
1
POSITIVE
U9
POWER-DOWN
0
DISABLED
1
ENABLED
U8
CP
THREE-STATE
0
DISABLED
1
ENABLED
U7
COUNTER
RESET
0
DISABLED
1
ENABLED
05863-
014
U12
Σ-Δ RESET
0
ENABLED
1
DISABLED
Figure 20. Function Register (R3) Map
相关PDF资料 |
PDF描述 |
|---|---|
| ADF4156BCPZ | IC PLL FRAC-N FREQ SYNTH 20LFCSP |
| X9317UV8Z-2.7 | IC XDCP 100TAP 50K 3-WIRE 8TSSOP |
| ISPPAC-CLK5320S-01TN64I | IC BUFFER FANOUT 20OUTPUT 64TQFP |
| VE-J10-MZ-S | CONVERTER MOD DC/DC 5V 25W |
| SY100S838LZG | IC CLOCK GEN 3.3V/5V 20-SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADF4156BRUZ-RL | 功能描述:IC PLL FRAC-N FREQ SYNTH 16TSSOP RoHS:是 类别:集成电路 (IC) >> 时钟/计时 - 时钟发生器，PLL，频率合成器 系列:- 标准包装:1,000 系列:Precision Edge® 类型:时钟/频率合成器 PLL:无 输入:CML，PECL 输出:CML 电路数:1 比率 - 输入:输出:2:1 差分 - 输入:输出:是/是 频率 - 最大:10.7GHz 除法器/乘法器:无/无 电源电压:2.375 V ~ 3.6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:16-VFQFN 裸露焊盘，16-MLF? 供应商设备封装:16-MLF?（3x3） 包装:带卷 (TR) 其它名称:SY58052UMGTRSY58052UMGTR-ND |
| ADF4156BRUZ-RL7 | 功能描述:IC PLL FRAC-N FREQ SYNTH 16TSSOP RoHS:是 类别:集成电路 (IC) >> 时钟/计时 - 时钟发生器，PLL，频率合成器 系列:- 标准包装:1,000 系列:Precision Edge® 类型:时钟/频率合成器 PLL:无 输入:CML，PECL 输出:CML 电路数:1 比率 - 输入:输出:2:1 差分 - 输入:输出:是/是 频率 - 最大:10.7GHz 除法器/乘法器:无/无 电源电压:2.375 V ~ 3.6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:16-VFQFN 裸露焊盘，16-MLF? 供应商设备封装:16-MLF?（3x3） 包装:带卷 (TR) 其它名称:SY58052UMGTRSY58052UMGTR-ND |
| ADF4156SP1BRUZ | 制造商:Analog Devices 功能描述: |
| ADF4157 | 制造商:AD 制造商全称:Analog Devices 功能描述:High Resolution 6 GHz Fractional-N Frequency Synthesizer |
| ADF4157BCPZ | 功能描述:IC PLL FREQ SYNTH 6GHZ 20LFCSP RoHS:是 类别:集成电路 (IC) >> 时钟/计时 - 时钟发生器，PLL，频率合成器 系列:- 标准包装:1,000 系列:Precision Edge® 类型:时钟/频率合成器 PLL:无 输入:CML，PECL 输出:CML 电路数:1 比率 - 输入:输出:2:1 差分 - 输入:输出:是/是 频率 - 最大:10.7GHz 除法器/乘法器:无/无 电源电压:2.375 V ~ 3.6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:16-VFQFN 裸露焊盘，16-MLF? 供应商设备封装:16-MLF?（3x3） 包装:带卷 (TR) 其它名称:SY58052UMGTRSY58052UMGTR-ND |
发布紧急采购，3分钟左右您将得到回复。