- 您现在的位置：买卖IC网 > PDF目录11749 > ADM1024ARUZ-REEL (ON Semiconductor)IC MONITOR SYS TEMP/VOLT 24TSSOP PDF资料下载
参数资料
| 型号： | ADM1024ARUZ-REEL |
| 厂商： | ON Semiconductor |
| 文件页数： | 29/30页 |
| 文件大小： | 0K |
| 描述： | IC MONITOR SYS TEMP/VOLT 24TSSOP |
| 产品变化通告： | MFG CHG Notification ADI to ON Semi |
| 标准包装： | 2,500 |
| 应用： | PC，PDA |
| 接口： | 串行 |
| 电源电压： | 2.8 V ~ 5.5 V |
| 封装/外壳： | 24-TSSOP（0.173"，4.40mm 宽） |
| 供应商设备封装： | 24-TSSOP |
| 包装： | 带卷 (TR) |
| 安装类型： | 表面贴装 |
| 其它名称： | ADM1024ARUZ-REEL-ND ADM1024ARUZ-REELOSTR |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页当前第29页第30页
ADM1024
http://onsemi.com
8
General Description
The ADM1024 is a complete system hardware monitor for
microprocessor-based systems. The device communicates
with the system via a serial SMBus. The serial bus controller
has a hardwired address line for device selection (Pin 1), a
serial data line for reading and writing addresses and data
(SDA, Pin 14), and an input line for the serial clock (Pin 3),
and an input line for the serial clock (Pin 4). All control and
programming functions of the ADM1024 are performed over
the serial bus.
Measurement Inputs
Programmability of the measurement inputs makes the
ADM1024 extremely flexible and versatile. The device has
a 10bit ADC and nine measurement input pins that can be
configured in different ways.
Pins 5 and 6 can be programmed as general-purpose
analog inputs with a range of 0 V to 2.5 V, or as digital inputs
to monitor the speed of fans with digital tachometer outputs.
The fan inputs can be programmed to accommodate fans
with different speeds and different numbers of pulses per
revolution from their tachometer outputs.
Pins 13 and 14 are dedicated temperature inputs and may
be connected to the cathode and anode of an external
temperature sensing diode.
Pins 15, 16, and 19 are dedicated analog inputs with
on-chip attenuators, configured to monitor 12 V, 5.0 V, and
the processor core voltage, respectively.
Pins 17 and 18 may be configured as analog inputs with
on-chip attenuators to monitor a second processor core voltage
and a 2.5 V supply, or they may be configured as a temperature
input and connected to a second temperature-sensing diode.
The ADC also accepts input from an on-chip band gap
temperature sensor that monitors system-ambient temperature.
Finally, the ADM1024 monitors the supply from which it
is powered, so there is no need for a separate 3.3 V analog
input if the chip VCC is 3.3 V. The range of this VCC
measurement can be configured for either a 3.3 V or 5.0 V
VCC by Bit 3 of the Channel Mode Register.
Sequential Measurement
When the ADM1024 monitoring sequence is started, it
cycles sequentially through the measurement of analog
inputs and the temperature sensor, while at the same time the
fan speed inputs are independently monitored. Measured
values from these inputs are stored in Value Registers. These
can be read out over the serial bus, or can be compared with
programmed limits stored in the Limit Registers. The results
of out-of-limit comparisons are stored in the Interrupt Status
Registers, and will generate an interrupt on the INT line
(Pin 10).
Any or all of the Interrupt Status Bits can be masked by
appropriate programming of the Interrupt Mask Register.
Processor Voltage ID
Five digital inputs (VID4 to VID0Pins 20 to 24) read the
processor voltage ID code. These inputs can also be
reconfigured as interrupt inputs.
The VID pins have internal 100 k
W pullup resistors.
Chassis Intrusion
A chassis intrusion input (Pin 7) is provided to detect
unauthorized tampering with the equipment.
RESET
A RESET input/output (Pin 12) is provided. Pulling this
pin low will reset all ADM1024 internal registers to default
values. The ADM1024 can also be programmed to give a
low going 45 ms reset pulse at this pin.
Analog Output
The ADM1024 contains an on-chip, 8-bit DAC with an
output range of 0 V to 2.5 V (Pin 11). This is typically used
to implement a temperature-controlled fan by controlling
the speed of a fan dependent upon the temperature measured
by the on-chip temperature sensor.
Testing of board level connectivity is simplified by
providing a NAND tree test function. The AOUT (Pin 11)
also doubles as a NAND test input, while Pin 1 doubles as
a NAND tree output.
Internal Registers of the ADM1024
A brief description of the ADM1024’s principal internal
registers follows. More detailed information on the function
Configuration Registers: Provide control and
configuration.
Channel Mode Register: Stores the data for the
operating modes of the input channels.
Address Pointer Register: This register contains the
address that selects one of the other internal registers.
When writing to the ADM1024, the first byte of data is
always a register address, which is written to the
Address Pointer Register.
Interrupt (INT) Status Registers: Two registers to
provide status of each interrupt event. These registers
are also mirrored at addresses 4Ch and 4Dh.
Interrupt (INT) Mask Registers: Allow masking of
individual interrupt sources.
Temperature Configuration Register: The configuration
of the temperature interrupt is controlled by the lower
three bits of this register.
VID/Fan Divisor Register: The status of the VID0 to
VID4 pins of the processor can be written to and read
from these registers. Divisor values for fan speed
measurement are also stored in this register.
相关PDF资料 |
PDF描述 |
|---|---|
| PIC18LF46K80-I/P | MCU PIC ECAN 64KB FLASH 40DIP |
| MS27468E13B22S | CONN RCPT 22POS JAM NUT W/SCKT |
| VE-B4F-IW-F1 | CONVERTER MOD DC/DC 72V 100W |
| PIC16LC620-04/SO | IC MCU OTP 512X14 COMP 18SOIC |
| VE-B4D-IX-F4 | CONVERTER MOD DC/DC 85V 75W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADM1024ARUZ-REEL7 | 功能描述:IC MONITOR SYS TEMP/VOLT 24TSSOP RoHS:是 类别:集成电路 (IC) >> 接口 - 专用 系列:- 标准包装:3,000 系列:- 应用:PDA，便携式音频/视频，智能电话 接口:I²C，2 线串口 电源电压:1.65 V ~ 3.6 V 封装/外壳:24-WQFN 裸露焊盘 供应商设备封装:24-QFN 裸露焊盘（4x4） 包装:带卷 (TR) 安装类型:表面贴装 产品目录页面:1015 (CN2011-ZH PDF) 其它名称:296-25223-2 |
| ADM1024EVB | 功能描述:BOARD EVAL FOR ADM1024 RoHS:否 类别:编程器，开发系统 >> 过时/停产零件编号 系列:- 标准包装:1 系列:- 传感器类型:CMOS 成像，彩色（RGB） 传感范围:WVGA 接口:I²C 灵敏度:60 fps 电源电压:5.7 V ~ 6.3 V 嵌入式:否 已供物品:成像器板 已用 IC / 零件:KAC-00401 相关产品:4H2099-ND - SENSOR IMAGE WVGA COLOR 48-PQFP4H2094-ND - SENSOR IMAGE WVGA MONO 48-PQFP |
| ADM1025 | 制造商:AD 制造商全称:Analog Devices 功能描述:Low-Cost PC Hardware Monitor ASIC |
| ADM1025A | 制造商:AD 制造商全称:Analog Devices 功能描述:Low-Cost PC Hardware Monitor ASIC |
| ADM1025AARQ | 功能描述:IC MONITOR SYS/VOLT 5CH 16QSOP RoHS:否 类别:集成电路 (IC) >> 接口 - 专用 系列:- 标准包装:3,000 系列:- 应用:PDA，便携式音频/视频，智能电话 接口:I²C，2 线串口 电源电压:1.65 V ~ 3.6 V 封装/外壳:24-WQFN 裸露焊盘 供应商设备封装:24-QFN 裸露焊盘（4x4） 包装:带卷 (TR) 安装类型:表面贴装 产品目录页面:1015 (CN2011-ZH PDF) 其它名称:296-25223-2 |
发布紧急采购，3分钟左右您将得到回复。