- 您现在的位置：买卖IC网 > PDF目录1776 > ADN2848ACPZ-32-RL7 (Analog Devices Inc)IC LASER DRIVER 1.25GBPS 32LFCSP PDF资料下载
参数资料
| 型号： | ADN2848ACPZ-32-RL7 |
| 厂商： | Analog Devices Inc |
| 文件页数： | 9/12页 |
| 文件大小： | 0K |
| 描述： | IC LASER DRIVER 1.25GBPS 32LFCSP |
| 标准包装： | 1,500 |
| 类型： | 激光二极管驱动器（光纤） |
| 数据速率： | 1.25Gbps |
| 通道数： | 1 |
| 电源电压： | 3 V ~ 3.6 V |
| 电流 - 电源： | 50mA |
| 电流 - 调制： | 80mA |
| 电流 - 偏置： | 100mA |
| 工作温度： | -40°C ~ 85°C |
| 封装/外壳： | 32-VFQFN 裸露焊盘，CSP |
| 供应商设备封装： | 32-LFCSP-VQ（5x5） |
| 包装： | 带卷 (TR) |
| 安装类型： | 表面贴装 |
Data Sheet
POWER CONSUMPTION
The ADN2848 die temperature must be kept below 125°C. The
LFCSP_VQ package has an exposed paddle. The exposed
paddle should be connected in such a manner that it is at the
same potential as the ADN2848 ground pins. The θ JA for the
package is shown under the Absolute Maximum Ratings. Power
consumption can be calculated using
I CC = I CCMIN + 0.3 I MOD
P = V CC × I CC + (I BIAS × V BIAS_PIN ) + I MOD (V MODP_PIN + V MODN_PIN )/2
T DIE = T AMBIENT + θ JA × P
Thus, the maximum combination of I BIAS + I MOD must be
calculated
where:
I CCMIN = 50 mA, the typical value of I CC provided on Page 3 with
I BIAS = I MOD = 0.
ADN2848
Caution must be used when choosing component values for
ac coupling to ensure that the time constants (L/R and RC, see
number of CIDs (consecutive identical digits). Failure to do this
could lead to pattern dependent jitter and vertical eye closure.
For designs with low series resistance, or where external
components become impractical, the ADN2848 supports direct
connection to the laser diode (see Figure 8). In this case, care
must be taken to ensure that the voltage drop across the laser
diode does not violate the minimum compliance voltage on the
IMODP pin.
OPTICAL SUPERVISOR
The PSET and ERSET potentiometers can be replaced with a
dual digital potentiometer, the ADN2850 (see Figure 7). The
ADN2850 provides an accurate digital control for the average
optical power and extinction ratio and ensures excellent
stability over temperature.
V CC
T DIE = die temperature.
V CC
IMPD
T AMBIENT = ambient temperature.
V BIAS_PIN = voltage at I BIAS pin.
Tx
ADN2850
SDI
ADN2848
IMODP
V CC
V MODP_PIN = average voltage at IMODP pin.
Rx
SDO
DAC1
DAC2
PSET
ERSET
I BIAS
CLK
CLK
V MODN_PIN = average voltage at IMODN pin.
LASER DIODE INTERFACING
CS
CS
Many laser diodes designed for 1.25 Gbps operation are
packaged with an internal resistor to bring the effective
impedance up to 25 Ω in order to minimize transmission line
effects. In high current applications, the voltage drop across this
resistor, combined with the laser diode forward voltage, makes
DATAP
DATAN
IDTONE
Figure 7. Application Using the ADN2850 Dual 10-Bit Digital Potentiometer
with Extremely Low Temperature Coefficient as an Optical Supervisor
direct connection between the laser and the driver impractical
in a 3 V system. AC coupling the driver to the laser diode
removes this headroom constraint.
Rev. B | Page 9 of 12
相关PDF资料 |
PDF描述 |
|---|---|
| ADN2870ACPZ-RL7 | IC LSR DRVR 3.3GPBS 3.6V 24LFCSP |
| ADN2871ACPZ-RL7 | IC LASER DRIVER 4.25GBPS 24LFCSP |
| ADN2872ACPZ-R7 | IC LASR DVR 3.3GBPS 3.3V 24LFCSP |
| ADN2873ACPZ-R7 | IC LASER DRIVER 4.25GBPS 24LFCSP |
| ADN8830ACPZ-REEL | IC THERMO COOLER CNTRLR 32-LFCSP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADN2849 | 制造商:AD 制造商全称:Analog Devices 功能描述:10.7 Gbps Electro-Absorption Modulator Driver |
| ADN2849ACP | 制造商:AD 制造商全称:Analog Devices 功能描述:10.7 Gbps Electro-Absorption Modulator Driver |
| ADN2849ACP-RL | 制造商:AD 制造商全称:Analog Devices 功能描述:10.7 Gbps Electro-Absorption Modulator Driver |
| ADN2849ACP-RL7 | 制造商:AD 制造商全称:Analog Devices 功能描述:10.7 Gbps Electro-Absorption Modulator Driver |
| ADN2849SURF | 制造商:AD 制造商全称:Analog Devices 功能描述:10.7 Gbps Electro-Absorption Modulator Driver |
发布紧急采购，3分钟左右您将得到回复。