- 您现在的位置：买卖IC网 > PDF目录16950 > ADP1740-1.5-EVALZ (Analog Devices Inc)BOARD EVAL FOR ADP1740-1.5 PDF资料下载
参数资料
| 型号： | ADP1740-1.5-EVALZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 11/20页 |
| 文件大小： | 0K |
| 描述： | BOARD EVAL FOR ADP1740-1.5 |
| 标准包装： | 1 |
| 每 IC 通道数： | 1 - 单 |
| 输出电压： | 1.5V |
| 电流 - 输出： | 2A |
| 输入电压： | 1.6 ~ 3.6 V |
| 稳压器类型： | 正，固定式 |
| 工作温度： | -40°C ~ 125°C |
| 板类型： | 完全填充 |
| 已供物品： | 板 |
| 已用 IC / 零件： | ADP1740 |
Data Sheet
THEORY OF OPERATION
The ADP1740/ADP1741 are low dropout linear regulators
that use an advanced, proprietary architecture to provide high
power supply rejection ratio (PSRR) and excellent line and load
transient response with only a small 4.7 μF ceramic output capac-
itor. Both devices operate from a 1.6 V to 3.6 V input rail and
provide up to 2 A of output current. Supply current in shutdown
mode is typically 2 μA.
ADP1740/ADP1741
The ADP1740 is available in seven fixed output voltage options
from 0.75 V to 2.5 V. The ADP1740 allows for connection of an
external soft start capacitor, which controls the output voltage
ramp during startup. The ADP1741 is an adjustable version with
an output voltage that can be set to a value from 0.75 V to 3.3 V
by an external voltage divider. Both devices are controlled by an
enable pin (EN).
SOFT START FUNCTION
VIN
ADP1740
UVLO
REVERSE POLARITY
PROTECTION
VOUT
For applications that require a controlled startup, the ADP1740/
ADP1741 provide a programmable soft start function. The
programmable soft start is useful for reducing inrush current
upon startup and for providing voltage sequencing. To implement
GND
PG
SHORT-CIRCUIT
AND THERMAL
PROTECTION
0.5V
REF
R1
R2
SENSE
soft start, connect a small ceramic capacitor from SS to GND.
Upon startup, a 0.9 μA current source charges this capacitor.
The ADP1740/ADP1741 start-up output voltage is limited by
the voltage at SS, providing a smooth ramp-up to the nominal
output voltage. The soft start time is calculated as follows:
EN
PG
DETECT
SHUTDOWN
0.9μA
SS
t SS = V REF × ( C SS / I SS )
where:
t SS is the soft start period.
V REF is the 0.5 V reference voltage.
(1)
Figure 24. ADP1740 Internal Block Diagram
C SS is the soft start capacitance from SS to GND.
I SS is the current sourced from SS (0.9 μA).
VIN
ADP1741
UVLO
REVERSE POLARITY
PROTECTION
VOUT
When the ADP1740/ADP1741 are disabled (using the EN pin),
the soft start capacitor is discharged to GND through an
internal 100 ? resistor.
2.50
2.25
GND
SHORT-CIRCUIT
2.00
EN
AND THERMAL
PROTECTION
1.75
1.50
1nF
PG
EN
PG
DETECT
SHUTDOWN
0.5V
REF
0.9μA
ADJ
SS
1.25
1.00
0.75
0.50
4.7nF
10nF
0.25
Figure 25. ADP1741 Internal Block Diagram
Internally, the ADP1740/ADP1741 consist of a reference,
an error amplifier, a feedback voltage divider, and a PMOS
pass transistor. Output current is delivered via the PMOS pass
transistor, which is controlled by the error amplifier. The error
amplifier compares the reference voltage with the feedback
voltage from the output and amplifies the difference. If the feed-
back voltage is lower than the reference voltage, the gate of the
PMOS device is pulled lower, allowing more current to pass
and increasing the output voltage. If the feedback voltage is
higher than the reference voltage, the gate of the PMOS device
is pulled higher, allowing less current to pass and decreasing the
output voltage.
Rev. F | Page 11 of 20
0
0 2 4 6 8 10
TIME (ms)
Figure 26. V OUT Ramp-Up with External Soft Start Capacitor
相关PDF资料 |
PDF描述 |
|---|---|
| RMA06DRMI-S288 | CONN EDGECARD 12POS .125 EXTEND |
| EYM06DRMD-S664 | CONN EDGECARD 12POS .156 WW |
| GBA31DRSN-S288 | CONN EDGECARD 62POS .125 EXTEND |
| GEM31DTKN-S288 | CONN EDGECARD 62POS .156 EXTEND |
| VI-J5V-EY | CONVERTER MOD DC/DC 5.8V 50W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADP1740ACPZ-0.75R7 | 功能描述:IC REG LDO 0.75V 2A 16LFCSP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 标准包装:1 系列:anyCAP® 稳压器拓扑结构:正，固定式 输出电压:3.3V 输入电压:最高 6V 电压 - 压降（标准）:0.23V @ 1.5A 稳压器数量:1 电流 - 输出:1.5A 电流 - 限制（最小）:- 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:TO-261-4，TO-261AA 供应商设备封装:SOT-223-3 包装:Digi-Reel® 其它名称:ADP3339AKCZ-3.3-RLDKR |
| ADP1740ACPZ-0.75-R7 | 制造商:AD 制造商全称:Analog Devices 功能描述:2 A, Low VIN, Low Dropout Linear Regulator |
| ADP1740ACPZ-1.0-R7 | 功能描述:IC REG LDO 1V 2A 16LFCSP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 产品培训模块:MIC5365/66 Ultra-small LDO Regulators 标准包装:1 系列:- 稳压器拓扑结构:正，固定式 输出电压:3V 输入电压:最高 5.5V 电压 - 压降（标准）:0.155V @ 150mA 稳压器数量:1 电流 - 输出:150mA 电流 - 限制（最小）:200mA 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:4-UDFN 裸露焊盘，4-TMLF? 供应商设备封装:4-TMLF?（1x1） 包装:Digi-Reel® 其它名称:576-3192-6 |
| ADP1740ACPZ-1.1-R7 | 功能描述:IC REG LDO 1.1V 2A 16LFCSP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 标准包装:1 系列:anyCAP® 稳压器拓扑结构:正，固定式 输出电压:3.3V 输入电压:最高 6V 电压 - 压降（标准）:0.23V @ 1.5A 稳压器数量:1 电流 - 输出:1.5A 电流 - 限制（最小）:- 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:TO-261-4，TO-261AA 供应商设备封装:SOT-223-3 包装:Digi-Reel® 其它名称:ADP3339AKCZ-3.3-RLDKR |
| ADP1740ACPZ-1.2-R7 | 功能描述:IC REG LDO 1.2V 2A 16LFCSP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 产品培训模块:MIC5365/66 Ultra-small LDO Regulators 标准包装:1 系列:- 稳压器拓扑结构:正，固定式 输出电压:3V 输入电压:最高 5.5V 电压 - 压降（标准）:0.155V @ 150mA 稳压器数量:1 电流 - 输出:150mA 电流 - 限制（最小）:200mA 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:4-UDFN 裸露焊盘，4-TMLF? 供应商设备封装:4-TMLF?（1x1） 包装:Digi-Reel® 其它名称:576-3192-6 |
发布紧急采购，3分钟左右您将得到回复。