- 您现在的位置：买卖IC网 > PDF目录19382 > ADSP-BF561SBBZ500 (Analog Devices Inc)IC PROCESSOR 500MHZ 297-PBGA PDF资料下载
参数资料
| 型号： | ADSP-BF561SBBZ500 |
| 厂商： | Analog Devices Inc |
| 文件页数： | 8/64页 |
| 文件大小： | 0K |
| 描述： | IC PROCESSOR 500MHZ 297-PBGA |
| 产品培训模块： | Blackfin® Processor Core Architecture Overview Blackfin® Device Drivers Blackfin® Optimizations for Performance and Power Consumption Blackfin® System Services |
| 标准包装： | 1 |
| 系列： | Blackfin® |
| 类型： | 定点 |
| 接口： | SPI，SSP，UART |
| 时钟速率： | 500MHz |
| 非易失内存： | 外部 |
| 芯片上RAM： | 328kB |
| 电压 - 输入/输出： | 2.50V，3.30V |
| 电压 - 核心： | 1.25V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 297-BGA |
| 供应商设备封装： | 297-PBGA（27x27） |
| 包装： | 托盘 |
| 配用： | ADZS-BFAUDIO-EZEXT-ND - BOARD EVAL AUDIO BLACKFIN ADZS-BF561-EZLITE-ND - BOARD EVAL ADSP-BF561 ADZS-BF561-MMSKIT-ND - KIT STARTER MULTIMEDIA BF561 ADZS-BFAV-EZEXT-ND - BOARD DAUGHT ADSP-BF533,37,61KIT |
第1页第2页第3页第4页第5页第6页第7页当前第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页
ADSP-BF561
even though the event may be latched in the ILAT register.
This register may be read from or written to while in
supervisor mode.
Note that general-purpose interrupts can be globally
enabled and disabled with the STI and CLI instructions,
respectively.
? CEC Interrupt Pending Register (IPEND) – The IPEND
register keeps track of all nested events. A set bit in the
IPEND register indicates the event is currently active or
nested at some level. This register is updated automatically
by the controller but may be read while in supervisor mode.
The SIC allows further control of event processing by providing
six 32-bit interrupt control and status registers. Each register
contains a bit corresponding to each of the peripheral interrupt
? SIC Interrupt Mask Registers (SIC_IMASKx) – These reg-
isters control the masking and unmasking of each
peripheral interrupt event. When a bit is set in these regis-
ters, that peripheral event is unmasked and will be
processed by the system when asserted. A cleared bit in
these registers masks the peripheral event, thereby prevent-
ing the processor from servicing the event.
? SIC Interrupt Status Registers (SIC_ISRx) – As multiple
peripherals can be mapped to a single event, these registers
allow the software to determine which peripheral event
source triggered the interrupt. A set bit indicates the
peripheral is asserting the interrupt; a cleared bit indicates
the peripheral is not asserting the event.
? SIC Interrupt Wakeup Enable Registers (SIC_IWRx) – By
enabling the corresponding bit in these registers, each
peripheral can be configured to wake up the processor,
should the processor be in a powered-down mode when
the event is generated.
Because multiple interrupt sources can map to a single general-
purpose interrupt, multiple pulse assertions can occur simulta-
neously, before or during interrupt processing for an interrupt
event already detected on this interrupt input. The IPEND reg-
ister contents are monitored by the SIC as the interrupt
acknowledgement.
The appropriate ILAT register bit is set when an interrupt rising
edge is detected (detection requires two core clock cycles). The
bit is cleared when the respective IPEND register bit is set. The
IPEND bit indicates that the event has entered into the proces-
sor pipeline. At this point the CEC will recognize and queue the
next rising edge event on the corresponding event input. The
minimum latency from the rising edge transition of the general-
purpose interrupt to the IPEND output asserted is three core
clock cycles; however, the latency can be much higher, depend-
ing on the activity within and the mode of the processor.
DMA CONTROLLERS
The ADSP-BF561 has two independent DMA controllers that
support automated data transfers with minimal overhead for
the DSP cores. DMA transfers can occur between the
ADSP-BF561 internal memories and any of its DMA-capable
peripherals. Additionally, DMA transfers can be accomplished
between any of the DMA-capable peripherals and external
devices connected to the external memory interfaces, including
the SDRAM controller and the asynchronous memory
controller. DMA-capable peripherals include the SPORTs, SPI
port, UART, and PPIs. Each individual DMA-capable periph-
eral has at least one dedicated DMA channel.
The ADSP-BF561 DMA controllers support both 1-dimen-
sional (1-D) and 2-dimensional (2-D) DMA transfers. DMA
transfer initialization can be implemented from registers or
from sets of parameters called descriptor blocks.
The 2-D DMA capability supports arbitrary row and column
sizes up to 64K elements by 64K elements, and arbitrary row
and column step sizes up to ± 32K elements. Furthermore, the
column step size can be less than the row step size, allowing
implementation of interleaved data streams. This feature is
especially useful in video applications where data can be de-
interleaved on the fly.
Examples of DMA types supported by the ADSP-BF561 DMA
controllers include:
? A single linear buffer that stops upon completion.
? A circular autorefreshing buffer that interrupts on each full
or fractionally full buffer.
? 1-D or 2-D DMA using a linked list of descriptors.
? 2-D DMA using an array of descriptors, specifying only the
base DMA address within a common page.
In addition to the dedicated peripheral DMA channels, each
DMA Controller has four memory DMA channels provided for
transfers between the various memories of the ADSP-BF561
system. These enable transfers of blocks of data between any of
the memories—including external SDRAM, ROM, SRAM, and
flash memory—with minimal processor intervention. Memory
DMA transfers can be controlled by a very flexible descriptor-
based methodology or by a standard register-based autobuffer
mechanism.
Further, the ADSP-BF561 has a four channel Internal Memory
DMA (IMDMA) Controller. The IMDMA Controller allows
data transfers between any of the internal L1 and L2 memories.
WATCHDOG TIMER
Each ADSP-BF561 core includes a 32-bit timer, which can be
used to implement a software watchdog function. A software
watchdog can improve system availability by forcing the proces-
sor to a known state, via generation of a hardware reset,
nonmaskable interrupt (NMI), or general-purpose interrupt, if
the timer expires before being reset by software. The program-
mer initializes the count value of the timer, enables the
appropriate interrupt, then enables the timer. Thereafter, the
software must reload the counter before it counts to zero from
the programmed value. This protects the system from remain-
ing in an unknown state where software, which would normally
reset the timer, has stopped running due to an external noise
condition or software error.
Rev. E |
Page 8 of 64 |
September 2009
相关PDF资料 |
PDF描述 |
|---|---|
| VI-B1T-CV-F2 | CONVERTER MOD DC/DC 6.5V 150W |
| VI-B22-CY-F4 | CONVERTER MOD DC/DC 15V 50W |
| ADSP-21363YSWZ-2AA | IC DSP 32BIT 200MHZ EPAD 144LQFP |
| RCM08DTBH-S189 | CONN EDGECARD 16POS R/A .156 SLD |
| VI-B21-CY-F3 | CONVERTER MOD DC/DC 12V 50W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ADSP-BF561SBBZ600 | 功能描述:IC DSP 32BIT 600MHZ 297-BGA RoHS:是 类别:集成电路 (IC) >> 嵌入式 - DSP（数字式信号处理器） 系列:Blackfin® 标准包装:40 系列:TMS320DM64x, DaVinci™ 类型:定点 接口:I²C，McASP，McBSP 时钟速率:400MHz 非易失内存:外部 芯片上RAM:160kB 电压 - 输入/输出:3.30V 电压 - 核心:1.20V 工作温度:0°C ~ 90°C 安装类型:表面贴装 封装/外壳:548-BBGA，FCBGA 供应商设备封装:548-FCBGA（27x27） 包装:托盘 配用:TMDSDMK642-0E-ND - DEVELPER KIT W/NTSC CAMERA296-23038-ND - DSP STARTER KIT FOR TMS320C6416296-23059-ND - FLASHBURN PORTING KIT296-23058-ND - EVAL MODULE FOR DM642TMDSDMK642-ND - DEVELOPER KIT W/NTSC CAMERA |
| ADSP-BF561SBBZ600 | 制造商:Analog Devices 功能描述:Digital Signal Processor IC |
| ADSPBF561SBBZC70.3 | 制造商:Analog Devices 功能描述: |
| ADSP-BF561SBBZ-ENG | 制造商:Analog Devices 功能描述:ENG SAMPLES - Trays |
| ADSP-BF561SKB500 | 功能描述:IC DSP CTRLR 32BIT 500MHZ 297BGA RoHS:否 类别:集成电路 (IC) >> 嵌入式 - DSP（数字式信号处理器） 系列:Blackfin® 标准包装:2 系列:StarCore 类型:SC140 内核 接口:DSI，以太网，RS-232 时钟速率:400MHz 非易失内存:外部 芯片上RAM:1.436MB 电压 - 输入/输出:3.30V 电压 - 核心:1.20V 工作温度:-40°C ~ 105°C 安装类型:表面贴装 封装/外壳:431-BFBGA，FCBGA 供应商设备封装:431-FCPBGA（20x20） 包装:托盘 |
发布紧急采购，3分钟左右您将得到回复。