参数资料
型号: AT45DB011D_07
厂商: Atmel Corp.
英文描述: 1-megabit 2.7-volt DataFlash
中文描述: 1兆位2.7伏的DataFlash
文件页数: 1/52页
文件大小: 1107K
代理商: AT45DB011D_07
Features
Single 2.7V to 3.6V Supply
RapidS
Serial Interface: 66 MHz Maximum Clock Frequency
– SPI Compatible Modes 0 and 3
User Configurable Page Size
– 256 Bytes per Page
– 264 Bytes per Page
Page Program Operation
– Intelligent Programming Operation
– 512 Pages (256/264 Bytes/Page) Main Memory
Flexible Erase Options
– Page Erase (256 Bytes)
– Block Erase (2 Kbytes)
– Sector Erase (32 Kbytes)
– Chip Erase (1 Mbits)
One SRAM Data Buffer (256/264 Bytes)
Continuous Read Capability through Entire Array
– Ideal for Code Shadowing Applications
Low-power Dissipation
– 7 mA Active Read Current Typical
– 25 μA Standby Current Typical
– 5 μA Deep Power-down Typical
Hardware and Software Data Protection Features
– Individual Sector
Sector Lockdown for Secure Code and Data Storage
– Individual Sector
Security: 128-byte Security Register
– 64-byte User Programmable Space
– Unique 64-byte Device Identifier
JEDEC Standard Manufacturer and Device ID Read
100,000 Program/Erase Cycles Per Page Minimum
Data Retention – 20 Years
Industrial Temperature Range
Green (Pb/Halide-free/RoHS Compliant) Packaging Options
1.
The AT45DB011D is a 2.7V, serial-interface Flash memory ideally suited for a wide
variety of digital voice-, image-, program code- and data-storage applications. The
AT45DB011D supports RapidS serial interface for applications requiring very high
speed operations. RapidS serial interface is SPI compatible for frequencies up to 66
MHz. Its 1,081,344 bits of memory are organized as 512 pages of 256 bytes or 264
bytes each. In addition to the main memory, the AT45DB011D also contains one
SRAM buffer of 256/264 bytes. EEPROM emulation (bit or byte alterability) is easily
handled with a self-contained three step read-modify-write operation. Unlike conven-
tional Flash memories that are accessed randomly with multiple address lines and a
parallel interface, the DataFlash
uses a RapidS serial interface to sequentially
access its data. The simple sequential access dramatically reduces active pin count,
facilitates hardware layout, increases system reliability, minimizes switching noise,
and reduces package size.
Description
1-megabit
2.7-volt
DataFlash
AT45DB011D
Preliminary
3639B–DFLASH–02/07
相关PDF资料
PDF描述
AT45DB011D-MU 1-megabit 2.7-volt DataFlash
AT45DB011D-SSU 1-megabit 2.7-volt DataFlash
AT45DB011D-SU 1-megabit 2.7-volt DataFlash
AT45DB011 1-megabit 2.7-volt Only Serial DataFlash(1M位 2.7V串行数据闪速存储器)
AT45DB021B-CU 2-megabit 2.7-volt Only DataFlash
相关代理商/技术参数
参数描述
AT45DB011D-DWF 制造商:Adesto Technologies Corporation 功能描述:1M DATAFLASH, 8-UDFN,IND,GRN,NIPDAU - 1MB, DATAFLASH, WAFER, - Gel-pak, waffle pack, wafer, diced wafer on film 制造商:Adesto Technologies Corporation 功能描述:DIE/WAFER FLASH 1MBIT 66MHZ
AT45DB011D-MH SL954 制造商:Adesto Technologies Corporation 功能描述:IC FLASH 1MBIT 66MHZ 8UDFN
AT45DB011D-MH-SL954 制造商:Adesto Technologies Corporation 功能描述:8-UDFN (5X6), IND TEMP, 2.7V, TRAY, 256 BYTE PAGE - Trays 制造商:Adesto Technologies Corporation 功能描述:Flash 1M, 66MHz, 2.7-3.6V DataFlash
AT45DB011D-MH-SL955 制造商:Adesto Technologies Corporation 功能描述:8-UDFN (5X6), IND TEMP, 2.7V, T&R, 256 BYTE PAGE - Tape and Reel 制造商:Adesto Technologies Corporation 功能描述:IC FLASH 1MBIT 66MHZ 8UDFN 制造商:Adesto Technologies Corporation 功能描述:Flash 1M, 66MHz 2.7-3.6V DataFlash
AT45DB011D-MH-T 功能描述:闪存 1M 2.7-3.6V, 66Mhz Serial 闪存 RoHS:否 制造商:ON Semiconductor 数据总线宽度:1 bit 存储类型:Flash 存储容量:2 MB 结构:256 K x 8 定时类型: 接口类型:SPI 访问时间: 电源电压-最大:3.6 V 电源电压-最小:2.3 V 最大工作电流:15 mA 工作温度:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体: 封装:Reel