参数资料
| 型号： | BD9140MUV-E2 |
| 厂商： | Rohm Semiconductor |
| 文件页数： | 14/21页 |
| 文件大小： | 0K |
| 描述： | IC REG BUCK SYNC ADJ 2A VQFN020 |
| 标准包装： | 2,500 |
| 类型： | 降压（降压） |
| 输出类型： | 可调式 |
| 输出数： | 1 |
| 输出电压： | 2.5 V ~ 6 V |
| 输入电压： | 4.5 V ~ 13.2 V |
| PWM 型： | 电流模式 |
| 频率 - 开关： | 500kHz |
| 电流 - 输出： | 2A |
| 同步整流器： | 是 |
| 工作温度： | -40°C ~ 105°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 20-VFQFN 裸露焊盘 |
| 包装： | 带卷 (TR) |
| 供应商设备封装： | VQFN020V4040 |
BD9141MUV
Datasheet
V CC
Cin
EN
V CC ,PV CC
SW
L
V OUT
V OUT
V OUT
ITH
GND,PGND
ESR
C O
R O
R ITH
C ITH
Fig.33 Typical application
Stable feedback loop may be achieved by canceling the pole fp (Min.) produced by the output capacitor and the load
resistance with CR zero correction by the error amplifier.
fz (Amp.) = fp (Min.)
1
2 π× R ITH × C ITH
5. Determination of output voltage
=
1
2 π× R OMax. × C O
The output voltage V OUT is determined by the equation (6):
V OUT =(R2/R1+1) × V ADJ ??? (6) V ADJ : Voltage at ADJ terminal (0.8V Typ.)
With R1 and R2 adjusted, the output voltage may be determined as required.
SW
L
Co
R2
Output
Adjustable output voltage range : 2.5V to 6.0V
ADJ
R1
Fig.34 Determination of output voltage
Use 1 k? to 100 k? resistor for R1. if you can use the resistance more than
100k Ω or they have a big range between the setting value of output voltage and
input voltage.
8
7.5
Vo=6.0V
The minimum input voltage depends on the setting output voltage.
Basically, it is recommended to use in the condition :
V CCmin = V OUT +1.3V.
It is shown the necessary output current value at the minimum
input voltage. (DCR of inductor : 0.1Ω)See Fig.35.
This data is the characteristic value, so it doesn ’t guarantee the
operation range.
7
6.5
6
5.5
5
Vo=5.0V
Vo=4.0V
Vo=3.3V
6.Selection of the reference voltage capacitor (C VREG )
VREG voltage is the reference voltage created by Input voltage (Vcc
Voltage). C VREG capacitor should be selected 0.1μF or more.
4.5
0 0.5 1 1.5 2
OUTPUT CURRENT : IOUT[A]
Fig.35 minimum input voltage in each output voltage
www.rohm.com
?2012 ROHM Co., Ltd. All rights reserved.
TSZ22111 ? 15 ? 001
14/19
TSZ02201-0J3J0AJ00180-1-2
02.MAR.2012 Rev.001
相关PDF资料 |
PDF描述 |
|---|---|
| BD9300F-E2 | IC REG CTRLR BST INV PWM 14-SOP |
| BD9302FP-E2 | IC REG BUCK ADJ 2A DL HSOP25 |
| BD9305AFVM-TR | IC REG CTRLR BUCK PWM 8-MSOP |
| BD9328EFJ-E2 | IC REG BUCK SYNC ADJ 2A 8HTSOP |
| BD9329AEFJ-E2 | IC REG BUCK SYNC ADJ 3A 8HTSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| BD91411GW | 制造商:ROHM 制造商全称:Rohm 功能描述:Built-in OVP Micro USB Switch with USB2.0, MHLTM and Audio |
| BD91411GW-E2 | 制造商:ROHM 制造商全称:Rohm 功能描述:Built-in OVP Micro USB Switch with USB2.0, MHLTM and Audio |
| BD9141MUV | 制造商:ROHM 制造商全称:Rohm 功能描述:4.5V to 13.2V, 2A 1ch Synchronous Buck Converter integrated FET |
| BD9141MUV_12 | 制造商:ROHM 制造商全称:Rohm 功能描述:4.5V to 13.2V, 2A 1ch Synchronous Buck Converter integrated FET |
| BD9141MUV-E2 | 功能描述:开关变换器、稳压器与控制器 High Eff. Stepdown Sw Reg 2A 4.5-13.2V RoHS:否 制造商:Texas Instruments 输出电压:1.2 V to 10 V 输出电流:300 mA 输出功率: 输入电压:3 V to 17 V 开关频率:1 MHz 工作温度范围: 安装风格:SMD/SMT 封装 / 箱体:WSON-8 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。