参数资料
型号: BX80552360
厂商: INTEL CORP
元件分类: 微控制器/微处理器
英文描述: 32-BIT, 3460 MHz, MICROPROCESSOR, CBGA775
封装: LGA-775
文件页数: 6/96页
文件大小: 1975K
代理商: BX80552360
Electrical Specifications
14
Datasheet
2.2.2
VTT Decoupling
Decoupling must be provided on the motherboard. Decoupling solutions must be sized
to meet the expected load. To insure compliance with the specifications, various factors
associated with the power delivery solution must be considered including regulator
type, power plane and trace sizing, and component placement. A conservative
decoupling solution would consist of a combination of low ESR bulk capacitors and high
frequency ceramic capacitors.
2.2.3
FSB Decoupling
The processor integrates signal termination on the die. In addition, some of the high
frequency capacitance required for the FSB is included on the processor package.
However, additional high frequency capacitance must be added to the motherboard to
properly decouple the return currents from the front side bus. Bulk decoupling must
also be provided by the motherboard for proper [A]GTL+ bus operation.
2.3
Voltage Identification
The Voltage Identification (VID) specification for the processor is defined by the Voltage
Regulator-Down (VRD) 10.1 Design Guide For Desktop and Transportable LGA775
Socket. The voltage set by the VID signals is the reference VR output voltage to be
delivered to the processor VCC lands (see Section 2.5.3 for VCC overshoot
specifications). Refer to Table 14 for the DC specifications for these signals. A minimum
voltage for each processor frequency is provided in Table 4.
Individual processor VID values may be calibrated during manufacturing such that two
devices at the same core speed may have different default VID settings. This is
reflected by the VID Range values provided in Table 4. Refer to the Intel Celeron D
Processor 300 Sequence Specification Update for further details on specific valid core
frequency and VID values of the processor.
The processor uses 6 voltage identification signals, VID[5:0], to support automatic
selection of power supply voltages. Table 2 specifies the voltage level corresponding to
the state of VID[5:0]. A ‘1’ in this table refers to a high voltage level and a ‘0’ refers to
a low voltage level. If the processor socket is empty (VID[5:0] = x11111), or the
voltage regulation circuit cannot supply the voltage that is requested, it must disable
itself. Refer to the Voltage Regulator-Down (VRD) 10.1 Design Guide For Desktop and
Transportable LGA775 Socket for further details.
The processor provides the ability to operate while transitioning to an adjacent VID and
its associated processor core voltage (VCC). This will represent a DC shift in the load
line. Note that a low-to-high or high-to-low voltage state change may result in as many
VID transitions as necessary to reach the target core voltage. Transitions above the
specified VID are not permitted. Table 4 includes VID step sizes and DC shift ranges.
Minimum and maximum voltages must be maintained as shown in Table 5 and Figure 1
as measured across the VCC_SENSE and VSS_SENSE lands.
The VRM or VRD used must be capable of regulating its output to the value defined by
the new VID. DC specifications for dynamic VID transitions are included in Table 4, and
Table 5. Refer to the Voltage Regulator-Down (VRD) 10.1 Design Guide For Desktop
and Transportable LGA775 Socket for further details.
相关PDF资料
PDF描述
BX80552651 32-BIT, 3400 MHz, MICROPROCESSOR, PBGA775
BX80552651T 32-BIT, 3400 MHz, MICROPROCESSOR, PBGA775
BX80552661 32-BIT, 3600 MHz, MICROPROCESSOR, PBGA775
BX80552651T2 32-BIT, 3400 MHz, MICROPROCESSOR, PBGA775
BX80552641T 32-BIT, 3200 MHz, MICROPROCESSOR, PBGA775
相关代理商/技术参数
参数描述
BX80552360 S L9KK 制造商:Intel 功能描述:MPU CELERON 65NM 3.46GHZ 775PIN FCLGA4 - Boxed Product (Development Kits)
BX80552631 制造商:Intel 功能描述:Pentium4 Processor 630 3.0GHz with fan
BX80552631 S L9KG 制造商:Intel 功能描述:
BX80552641T2 制造商:Intel 功能描述:P4 641 3.2GHZ LP-BTX 2MB - Boxed Product (Development Kits)
BX80552651T2 制造商:Intel 功能描述:P4 651 3.4GHZ LP-BTX 2MB - Boxed Product (Development Kits)