- 您现在的位置：买卖IC网 > Datasheet目录969 > CDB5581 (Cirrus Logic Inc)BOARD EVAL FOR CS5581 ADC Datasheet资料下载
参数资料
| 型号： | CDB5581 |
| 厂商： | Cirrus Logic Inc |
| 文件页数： | 9/26页 |
| 文件大小： | 0K |
| 描述： | BOARD EVAL FOR CS5581 ADC |
| 标准包装： | 1 |
| ADC 的数量： | 1 |
| 位数： | 16 |
| 采样率（每秒）： | 200k |
| 数据接口： | 串行 |
| 输入范围： | ±2.048 V |
| 在以下条件下的电源（标准）： | 85mW @ 200kSPS |
| 工作温度： | -40°C ~ 85°C |
| 已用 IC / 零件： | CS5581 |
| 已供物品： | 板 |
| 相关产品： | 598-1272-5-ND - IC ADC 16BIT 1CH 200KSPS 24SSOP |
| 其它名称： | 598-1559 |
CDB5581
APPENDIX A. MAXIMIZING THE PERFORMANCE OF THE CS5581
A.1
A.2
PCB Layout Considerations
? Keep the signal path short between the CS5581 ADC input capacitors C37, C44 and the ADC
input pin to minimize trace inductance.
? The analog input buffer amplifiers and ADC input buffer capacitors are placed before the multi-
plexer. Placing the buffer amplifiers before the multiplexer allows the amplifiers driving the ADC
buffer capacitors to be fully settled when sampled by the ADC. Therefore, the multiplexer must
be of a low on-resistance type to prevent distortion or latency issues.
? Power supply noise is a major design consideration and the power supplies need adequate
bypassing and bulk capacitance.
? When operating the ADC from +2.5 V and -2.5 V split supplies, place the power supply & buffer
amplifier bypass capacitor ground connections close together.
? Keep all ground connections on each differential buffer amplifier as close to the device as pos-
sible to avoid introducing differential noise through high-impedance connections.
? Keep trace lengths short between the ADC and the voltage reference IC negative supply pins.
? Route the oscillator output away from analog circuitry.
? Use a solid ground plane in the PCB layout.
? Provide adequate separation between analog and digital signals.
? To minimize distortion within the analog signal path, consider using components with smaller
voltage dependencies.
? Minimize ADC digital output edge transition current loading.
Hardware Considerations
At a system level, use shielded cable for interconnects. Keep interconnect cable lengths as short as pos-
sible. Route analog and digital signals connecting to the PCB away from each other.
DS796DB3
9
相关PDF资料 |
PDF描述 |
|---|---|
| CDK5571 | CDB5571 W/CAPTURE PLUS 2 SYSTEM |
| CDK5581 | KIT BOARD FOR CDB5581 ADC |
| CF1176-000 | SHIELD TERMINATOR |
| SMS4SE4K9 | 集管和线壳 4P QIKMATE PIN STRT PC BOARDMOUNT |
| CF6147-000 | CABLE TERMINATION |
相关代理商/技术参数 |
参数描述 |
|---|---|
| CDB56-A | 制造商:Panduit Corp 功能描述: |
| CDB572 | 制造商: 功能描述: 制造商:Rockwell Automation / Allen-Bradley 功能描述: |
| CDB5S-A-L | 制造商:Panduit Corp 功能描述: |
| CDB6/2 | 功能描述:接线端子板接口模块 Feed-thru Term Dble level RoHS:否 制造商:Phoenix Contact 类型:Isolating Amplifier 节距: 位置/触点数量:2 线规量程: 电流额定值: 电压额定值:24 V 安装风格:DIN Rail 安装角: 端接类型:Screw 触点电镀: |
| CDB6/3 | 功能描述:接线端子板接口模块 lightning Arrestor 3pole RoHS:否 制造商:Phoenix Contact 类型:Isolating Amplifier 节距: 位置/触点数量:2 线规量程: 电流额定值: 电压额定值:24 V 安装风格:DIN Rail 安装角: 端接类型:Screw 触点电镀: |
发布紧急采购，3分钟左右您将得到回复。