- 您现在的位置：买卖IC网 > PDF目录26507 > CPC7695BC (CLARE INC) PDF资料下载
参数资料
| 型号： | CPC7695BC |
| 厂商： | CLARE INC |
| 元件分类： | 通信及网络 |
| 中文描述： | SPECIALTY TELECOM CIRCUIT, PDSO28 |
| 封装： | ROHS COMPLIANT, SOIC-28 |
| 文件页数： | 7/23页 |
| 文件大小： | 678K |
| 代理商： | CPC7695BC |
CPC7695
R00C
www.clare.com
15
2. Functional Description
2.1 Introduction
The CPC7695 has the following states:
Talk. Loop break switches SW1 and SW2 closed, all
other switches open.
Ringing. Ringing switches SW3 and SW4 closed, all
other switches open.
TESTout. Testout switches SW5 and SW6 closed,
all other switches open.
Ringing generator test. SW7 and SW8 closed, all
other switches open.
TESTin. Testin switches SW9 and SW10 closed, all
other switches open.
Simultaneous TESTin and TESTout. SW9, SW10,
SW5, and SW6 closed, all other switches open.
Simultaneous TESTout and Ringing generator
test. SW5, SW6, SW7, and SW8 closed, all other
switches open (only on the xC and xD versions).
All-Off. All switches open.
See “Truth Tables” on page 14 for more information.
The CPC7695 offers break-before-make and
make-before-break switching from the ringing state to
the talk state with simple TTL level logic input control.
Solid-state switch construction means no impulse
noise is generated when switching during ringing
cadence or ring trip, eliminating the need for external
zero-cross switching circuitry. State-control is via TTL
logic-level input so no additional driver circuitry is
required. The linear line break switches SW1 and
SW2 have exceptionally low RON and excellent
matching characteristics. The ringing switch, SW4,
has a minimum open contact breakdown voltage of
465 V at +25°C, sufficiently high with proper protection
to prevent breakdown in the presence of a transient
fault condition (i.e., passing the transient on to the
ringing generator).
Integrated into the CPC7695 is an over-voltage
clamping circuit, active current limiting, and a thermal
shutdown mechanism to provide protection to the
SLIC during a fault condition. Positive and negative
lightning surge currents are reduced by the current
limiting circuitry and hazardous potentials are diverted
away from the SLIC via the protection diode bridge or
the optional integrated protection SCR. Power-cross
potentials are also reduced by the current limiting and
thermal shutdown circuits.
To protect the CPC7695 from an overvoltage fault
condition, the use of a secondary protector is required.
The secondary protector must limit the voltage seen at
the TLINE and RLINE terminals to a level below the
maximum breakdown voltage of the switches. To
minimize the stress on the solid-state contacts, use of
a foldback or crowbar type secondary protector is
highly recommended. With proper selection of the
secondary protector, a line card using the CPC7695
will meet all relevant ITU, LSSGR, TIA/EIA and IEC
protection requirements.
The CPC7695 operates from a single +5 V supply
only. This gives the device extremely low idle and
active power consumption with virtually any range of
battery voltage. The battery voltage used by the
CPC7695 has a two fold function. For protection
purposes it is used as a fault condition current source
for the internal integrated protection circuitry.
Secondly, it is used as a reference so that in the event
of battery voltage loss, the CPC7695 will enter the
all-off state.
2.2 Under Voltage Switch Lock Out Circuitry
2.2.1 Introduction
Smart logic in the CPC7695 now provides for switch
state control during both power up and power loss
transitions. An internal detector is used to evaluate the
VDD supply to determine when to de-assert the under
voltage switch lock out circuitry with a rising VDD and
when to assert the under voltage switch lock out
circuitry with a falling VDD. Any time unsatisfactory low
VDD conditions exist, the lock out circuit overrides user
switch control by blocking the information at the
external input pins and conditioning internal switch
commands to the all-off state. Upon restoration of
VDD, the switches will remain in the all-off state until
the LATCH input is pulled low.
The rising VDD switch lock-out release threshold is
internally set to ensure all internal logic is properly
biased and functional before accepting external switch
commands from the inputs to control the switch states.
For a falling VDD event, the lock-out threshold is set to
assure proper logic and switch behavior up to the
moment the switches are forced off and external
inputs are suppressed.
相关PDF资料 |
PDF描述 |
|---|---|
| CPV362M4FPBF | Trans IGBT Module N-CH 600V 8.8A 13-Pin IMS-2 |
| CPV363M4KPBF | Trans IGBT Module N-CH 600V 11A 13-Pin IMS-2 |
| CPV363M4UPBF | Trans IGBT Module N-CH 600V 11A 13-Pin IMS-2 |
| CPV364M4FPBF | Trans IGBT Module N-CH 600V 27A 13-Pin IMS-2 |
| CPV364M4KPBF | Trans IGBT Module N-CH 600V 24A 13-Pin IMS-2 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| CPC7695BCTR | 功能描述:固态继电器-PCB安装 TTL LCAS10, DMOS SW8 w Protection SCR & Extra Logic, TTL Inputs, High SW4 DV/DT, TAPE/REEL RoHS:否 制造商:Omron Electronics 控制电压范围: 负载电压额定值:40 V 负载电流额定值:120 mA 触点形式:1 Form A (SPST-NO) 输出设备:MOSFET 封装 / 箱体:USOP-4 安装风格:SMD/SMT |
| CPC7695ZA | 功能描述:IC LINE CARD ACCESS SW 20-SOIC RoHS:是 类别:集成电路 (IC) >> 接口 - 电信 系列:* 产品培训模块:Lead (SnPb) Finish for COTS 产品变化通告:Product Discontinuation 06/Feb/2012 标准包装:750 系列:* |
| CPC7695ZATR | 功能描述:IC LINE CARD ACCESS SW 20-SOIC RoHS:是 类别:集成电路 (IC) >> 接口 - 电信 系列:* 产品培训模块:Lead (SnPb) Finish for COTS 产品变化通告:Product Discontinuation 06/Feb/2012 标准包装:750 系列:* |
| CPC7695ZB | 功能描述:IC LINE CARD ACCESS SW 20-SOIC RoHS:是 类别:集成电路 (IC) >> 接口 - 电信 系列:* 产品培训模块:Lead (SnPb) Finish for COTS 产品变化通告:Product Discontinuation 06/Feb/2012 标准包装:750 系列:* |
| CPC7695ZBTR | 功能描述:IC LINE CARD ACCESS SW 20-SOIC RoHS:是 类别:集成电路 (IC) >> 接口 - 电信 系列:* 产品培训模块:Lead (SnPb) Finish for COTS 产品变化通告:Product Discontinuation 06/Feb/2012 标准包装:750 系列:* |
发布紧急采购，3分钟左右您将得到回复。