参数资料
| 型号： | CS4341-CZZ |
| 厂商： | Cirrus Logic Inc |
| 文件页数： | 20/34页 |
| 文件大小： | 0K |
| 描述： | IC DAC STER 24BIT 96KHZ 16TSSOP |
| 标准包装： | 96 |
| 位数： | 24 |
| 数据接口： | 串行 |
| 转换器数目： | 2 |
| 电压电源： | 单电源 |
| 功率耗散（最大）： | 90mW |
| 工作温度： | -10°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-TSSOP（0.173"，4.40mm 宽） |
| 供应商设备封装： | 16-TSSOP |
| 包装： | 管件 |
| 输出数目和类型： | 2 电压，单极 |
| 采样率（每秒）： | 96k |
| 产品目录页面： | 756 (CN2011-ZH PDF) |
| 其它名称： | 598-1050-5 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页当前第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页
CS4341
DS298F5
27
6.3
TRANSITION AND MIXING CONTROL (ADDRESS 02H)
6.3.1 CHANNEL A VOLUME = CHANNEL B VOLUME (A = B) BIT 7
Default = 0
0 - Disabled
1 - Enabled
Function:
The AOUTA and AOUTB volume levels are independently controlled by the A and the B Channel Vol-
ume Control Bytes when this function is disabled. The volume on both AOUTA and AOUTB are de-
termined by the A Channel Volume Control Byte and the B Channel Byte is ignored when this function
is enabled.
6.3.2 SOFT RAMP AND ZERO CROSS CONTROL (SZCX) BIT 5-6
Default = 10
00 - Immediate Changes
01 - Changes On Zero Crossings
10 - Soft Ramped Changes
11 - Soft Ramped Changes On Zero Crossings
Function:
Immediate Changes
When Immediate Changes is selected all level changes will take effect immediately in one step.
Changes On Zero Crossings
Changes on Zero Crossings dictates that signal level changes, either by attenuation changes or mut-
ing, will occur on a signal zero crossing to minimize audible artifacts. The requested level change will
occur after a timeout period between 512 and 1024 sample periods (10.7 ms to 21.3 ms at 48 kHz
sample rate) if the signal does not encounter a zero crossing. The zero cross function is independent-
ly monitored and implemented for each channel.
Soft Ramped Changes
Soft Ramped Changes allows level changes, both muting and attenuation, to be implemented by in-
crementally ramping, in 1/8 dB steps, from the current level to the new level at a rate of 1dB per 8
left/right clock periods.
Soft Ramped Changes on Zero Crossings
Soft Ramped Changes On Zero Crossings dictates that signal level changes, either by attenuation
changes or muting, will occur in 1/8 dB steps implemented on a signal zero crossing. The 1/8 dB level
change will occur after a timeout period between 512 and 1024 sample periods (10.7 ms to 21.3 ms
at 48 kHz sample rate) if the signal does not encounter a zero crossing. The zero cross function is
independently monitored and implemented for each channel.
7
654
32
10
A = B
SZC1
SZC0
ATAPI4
ATAPI3
ATAPI2
ATAPI1
ATAPI0
0
100
10
01
相关PDF资料 |
PDF描述 |
|---|---|
| CS4341A-KSZ | IC DAC STER 24BIT 192KHZ 16SOIC |
| CS4351-DZZ | IC DAC STER 112DB 192KHZ 20TSSOP |
| CS4352-DZZ | IC DAC STER 102DB 192KHZ 20TSSOP |
| CS4354-CSZ | IC DAC 24BIT SRL 14SOIC |
| CS4360-KZZ | IC DAC STER 6CH 102DB 28TSSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| CS4341-CZZR | 功能描述:数模转换器- DAC IC 24bit 96kHz 101dB Stereo DAC w/VC RoHS:否 制造商:Texas Instruments 转换器数量:1 DAC 输出端数量:1 转换速率:2 MSPs 分辨率:16 bit 接口类型:QSPI, SPI, Serial (3-Wire, Microwire) 稳定时间:1 us 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-14 封装:Tube |
| CS4341-KS | 功能描述:数模转换器- DAC 24-bit 96kHz 101dB Stereo DAC w/VC RoHS:否 制造商:Texas Instruments 转换器数量:1 DAC 输出端数量:1 转换速率:2 MSPs 分辨率:16 bit 接口类型:QSPI, SPI, Serial (3-Wire, Microwire) 稳定时间:1 us 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-14 封装:Tube |
| CS4341-KSR | 功能描述:数模转换器- DAC 24-bit 96kHz 101dB Stereo DAC w/VC RoHS:否 制造商:Texas Instruments 转换器数量:1 DAC 输出端数量:1 转换速率:2 MSPs 分辨率:16 bit 接口类型:QSPI, SPI, Serial (3-Wire, Microwire) 稳定时间:1 us 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-14 封装:Tube |
| CS4341-KSZ | 制造商:Cirrus Logic 功能描述:24-BIT, 96 KHZ STEREO DAC WITH VOL CNTRL - Bulk 制造商:Cirrus Logic 功能描述:IC DAC 24BIT SRL 96KHZ 16-SOIC 制造商:Cirrus Logic 功能描述:24Bit 96kHz 101dB Stereo DAC |
| CS4341-KSZR | 制造商:Cirrus Logic 功能描述:DAC DUAL DELTA-SIGMA 24BIT 16SOIC - Tape and Reel |
发布紧急采购，3分钟左右您将得到回复。