参数资料
型号: CS8416-CNZ
厂商: Cirrus Logic Inc
文件页数: 31/37页
文件大小: 0K
描述: IC RCVR DGTL 192KHZ 28QFN COMM
标准包装: 490
类型: 数字音频接口接收器
应用: 数字音频
安装类型: 表面贴装
封装/外壳: 28-QFN
供应商设备封装: 28-QFN 裸露焊盘(5x5)
包装: 管件
产品目录页面: 759 (CN2011-ZH PDF)
配用: 598-1017-ND - BOARD EVAL FOR CS8416 RCVR
其它名称: 598-1723
DS578F3
37
CS8416
1 – Higher Update Rate Phase Detector - Recovered master clock (RMCK) will have low in-band jitter, but
increased wide-band jitter. Use this setting for the best performance when the output is connected to a delta-
sigma digital-to-analog converter (DAC).
TRUNC
– Determines if the audio word length is set according to the incoming channel status data as de-
coded by the AUX[3:0] bits. The resulting word length in bits is 24 minus AUX[3:0].
Default = ‘0’
0 – Incoming data is not truncated.
1 – Incoming data is truncated according to the length specified in the channel status data.
Truncation occurs before the de-emphasis filter. TRUNC has no effect on output data if de-emphasis filter
is not used.
Reserved
– These bits may change state depending on the input audio data.
14.3 Control1 (01h)
SWCLK
- Lets OMCK determine RMCK, OSCLK, OLRCK when PLL loses lock
Default = ‘0’
0 - Disable automatic clock switching. RMCK runs at the VCO frequency (~750 kHz) on PLL Unlock.
1 - Enable automatic clock switching on PLL unlock. OMCK clock input is automatically output on RMCK on
PLL Unlock.
MUTESAO
- Mute control for the serial audio output port
Default = ‘0’
0 - SDOUT not muted.
1 – SDOUT muted (set to all zeros).
INT[1:0]
- Interrupt output pin (INT) control
Default = ‘00’
00 - Active high; high output indicates interrupt condition has occurred.
01 - Active low, low output indicates an interrupt condition has occurred.
10 - Open drain, active low. Requires an external pull-up resistor on the INT pin. Thus it is not recommended
to multiplex INT onto GPO2 in IC Control Port Mode since an external resistor is required on GPO2 to spec-
ify the AD2 bit of the chip address.
11 – Reserved.
HOLD[1:0]
– Determine how received audio sample is affected when a receive error occurs
Default = ‘00’
00 – hold last audio sample.
01 – replace the current audio sample with all zeros (mute).
10- do not change the received audio sample.
11 - reserved
76543210
SWCLK
MUTESAO
INT1
INT0
HOLD1
HOLD0
RMCKF
CHS
相关PDF资料
PDF描述
VI-21J-IU-F2 CONVERTER MOD DC/DC 36V 200W
SP3494EN-L/TR IC TXRX RS485/RS422 LP 8NSOIC
SP3491EN-L/TR IC TXRX RS485 FULL DUPLX 14NSOIC
AD7828BRZ-REEL IC ADC 8BIT 8CHAN HS 28SOIC
AD7472BRZ IC ADC 12BIT PARALLEL 24SOIC
相关代理商/技术参数
参数描述
CS8416-CNZ 制造商:Cirrus Logic 功能描述:Receiver IC RoHS Compliant:Yes
CS8416-CNZR 功能描述:音频发送器、接收器、收发器 IC 192 kHz Digital Audio Receiver RoHS:否 制造商:Cirrus Logic 工作电源电压:3.3 V, 5 V 电源电流:11.8 mA 通道数量:1 最大工作温度:+ 70 C 接口类型:I2C, SPI 安装风格:SMD/SMT 封装 / 箱体:TSSOP-28 封装:
CS8416-CS 制造商:CIRRUS 制造商全称:Cirrus Logic 功能描述:192 kHZ DIGITAL AUDIO INTERFACE RECEIVER
CS8416-CSR 制造商:Cirrus Logic 功能描述:- Tape and Reel
CS8416CSZ 制造商:Cirrus Logic 功能描述: