参数资料
型号: CS8416-DZZ
厂商: Cirrus Logic Inc
文件页数: 25/37页
文件大小: 0K
描述: IC RCVR DGTL 192KHZ 28TSSOP AUTO
标准包装: 50
类型: 数字音频接口接收器
应用: 数字音频
安装类型: 表面贴装
封装/外壳: 28-TSSOP(0.173",4.40mm 宽)
供应商设备封装: 28-TSSOP
包装: 管件
产品目录页面: 759 (CN2011-ZH PDF)
配用: 598-1017-ND - BOARD EVAL FOR CS8416 RCVR
其它名称: 598-1726
DS578F3
31
CS8416
10.2 Non-Audio Detection
An AES3 data stream may be used to convey non-audio data, thus it is important to know whether the in-
coming AES3 data stream is digital audio or not. This information is typically conveyed in channel status bit
1, which is extracted automatically by the CS8416. However, certain non-audio sources, such as AC-3 or
MPEG encoders, may not adhere to this convention, and the bit may not be properly set. The CS8416 AES3
receiver can detect such non-audio data through the use of an autodetect module. The autodetect module
is similar to autodetect software used in Cirrus Logic DSPs.
If the AES3 stream contains sync codes in the proper format for IEC61937 or DTS data transmission, an
internal AUTODETECT signal will be asserted. If the sync codes no longer appear after a certain amount
of time, autodetection will time-out and AUTODETECT will be de-asserted until another format is detected.
The AUDIO signal is the logical OR of AUTODETECT and the received channel status bit 1 (as decoded
according to the CHS bit in the Control1 register).
In Hardware Mode, AUDIO is output on pin 15. In Software Mode, AUDIO is available through the GPO pins.
If non-audio data is detected, the data is still processed exactly as if it were normal audio. The exception is
the use of de-emphasis auto-select feature which will bypass the de-emphasis filter if the input stream is
detected to be non-audio. It is up to the user to mute the outputs as required.
10.2.1 Format Detection
In Software Mode, the CS8416 can automatically detect various serial audio input formats. The Format
Detect Status register (0Bh) is used to indicate a detected format. The register will indicate if uncom-
pressed PCM data, IEC61937 data, DTS_LD data, DTS_CD data, or digital silence was detected. Addi-
tionally, the IEC61937 Pc/Pd burst preambles are available in registers 23h-26h. See the register
descriptions for more information.
10.3 Interrupts
The CS8416 has a comprehensive interrupt capability. The INT signal, available in Software Mode, indi-
cates when an interrupt condition has occurred and may be output on one of the GPOs. It can also be set
through bits INT[1:0] in the Control1 register (01h) to be active low, active high or active low with no active
pull-up transistor. This last mode is used for active low, wired-OR hook- ups, with multiple peripherals con-
nected to the microcontroller interrupt input pin.
Many conditions can cause an interrupt, as listed in the interrupt status register descriptions. Each source
may be masked off through mask register bits. In addition, each source may be set to rising edge, falling
edge, or level sensitive. Combined with the option of level sensitive or edge sensitive modes within the mi-
crocontroller, many different configurations are possible, depending on the needs of the equipment design-
er. Refer to the register descriptions for the Interrupt Mask (07h), Interrupt Mode MSB (08h), Interrupt Mode
LSB (09h), and Interrupt 1 Status (0Dh) registers
相关PDF资料
PDF描述
CS8420-DSZ IC CONV S/R DGTL AUDIO 28-SOIC
CS8421-CNZ IC SAMPLE RATE CONVERTER 20QFN
CS8427-DZZ IC TXRX DGTL AUDIO 96KHZ 28TSSOP
CY28329ZXC IC CLOCK CK408B PLUMAS 56SSOP
CY28346OXC IC CLOCK DIFF OUT CK408 56SSOP
相关代理商/技术参数
参数描述
CS8416-DZZR 功能描述:音频发送器、接收器、收发器 IC 192 kHz Digital Audio Receiver RoHS:否 制造商:Cirrus Logic 工作电源电压:3.3 V, 5 V 电源电流:11.8 mA 通道数量:1 最大工作温度:+ 70 C 接口类型:I2C, SPI 安装风格:SMD/SMT 封装 / 箱体:TSSOP-28 封装:
CS8416-IS 制造商:CIRRUS 制造商全称:Cirrus Logic 功能描述:192 kHZ DIGITAL AUDIO INTERFACE RECEIVER
CS8416-IZ 制造商:CIRRUS 制造商全称:Cirrus Logic 功能描述:192 kHZ DIGITAL AUDIO INTERFACE RECEIVER
CS841A1 制造商:HVPSI 制造商全称:High Voltage Power Solutions, Inc. 功能描述:MOV Modules
CS841A2 制造商:HVPSI 制造商全称:High Voltage Power Solutions, Inc. 功能描述:MOV Modules