- 您现在的位置：买卖IC网 > Datasheet目录620 > CUB5RLY0 (Red Lion Controls)BOARD RELAY PLUG-IN FOR CUB5 Datasheet资料下载
参数资料
| 型号： | CUB5RLY0 |
| 厂商： | Red Lion Controls |
| 文件页数： | 13/16页 |
| 文件大小： | 0K |
| 描述： | BOARD RELAY PLUG-IN FOR CUB5 |
| 标准包装： | 1 |
| 系列： | * |
| 附件类型： | 插件板 |
| 适用于相关产品： | CUB5 |
| 产品目录页面： | 2853 (CN2011-ZH PDF) |
| 其它名称： | RLC123 |
6.5 MODULE 5 - S ERIAL C OMMUNICATIONS P ARAMETERS ( 5-SEriAL )
5-SEriAL
SEL
PARAMETER MENU
Pro
bAUd
Baud Rate
dAtA
Data Bit
PAritY
Parity Bit
Addr
Meter
Address
Abbr
Abbreviated
Printing
Prnt OPt
Print
Options
COPY
Copy Program
Settings
bAUd ?
?
9600
Prnt OPt ?
The SerialSetup Parameters are only active when one of the optional serial
communication/programming cards is installed in the meter.
Refer to the CUB5USB bulletin for details on the CUB5 USB programming
and programming requirements. This section replaces the bulletin shipped with
the RS232 and RS485 serial communications plug-in cards. Discard the
separate bulletin when using those serial plug-in cards with the CUB5B and
CUB5R.
BAUD RATE
300 1200 4800 19200
600 2400 9600 38400
Set the baud rate to match that of other serial communications equipment.
Normally, the baud rate is set to the highest value that all of the serial
communications equipment is capable of transmitting and receiving.
PRINT OPTIONS
NO YES
? NO
This parameter selects the meter values transmitted in response to a Print
Request. A print request is also referred to as a block print because more than
one parameter can be sent to a printer or computer as a block.
Selecting YES displays a sublist for choosing the meter parameters to appear
in the print block. All active parameters entered as YES in the sublist will be
transmitted during a block print. Parameters entered as NO will not be sent.
The “Print All” ( Prnt ALL ) option selects all meter values for transmitting
( YES ), without having to individually select each parameter in the sublist.
Note: Inactive parameters will not be sent regardless of the print option
setting. For example, Counter B or Scale Factor B will only be sent if Counter
B is enabled (Dual Counter mode or batch count). Likewise, the Setpoint
value(s) will not be sent unless an optional setpoint card is installed in the meter.
DATA BIT
dAtA ? 7-bit 8-bit
? 7-bit
Select either 7- or 8-bit data word length. Set the word length to match the
other serial communications equipment on the serial link.
PARITY BIT
DISPLAY
Count A
Count b
RAtE
CntA ScF
Cntb ScF
sSP1
SP2
CntA Ld
DESCRIPTION
Counter A
Counter B
Rate Value
Scale Factor A
Scale Factor B
Setpoint 1
Setpoint 2
Counter A Count Load
FACTORY
SETTING
YES
NO
NO
NO
NO
NO
NO
NO
MNEMONIC
CTA
CTB
RTE
SFA
SFB
SP1
SP2
CLD
PAritY
?
?
Odd
NO
Odd
EVEN
COPY PROGRAM SETTINGS
Addr ? to
Abbr ?
COPY ?
This parameter only appears when the Data Bit parameter is set to a 7-bit
data word length. Set the parity bit to match that of the other serial equipment
on the serial link. The meter ignores parity when receiving data and sets the
parity bit for outgoing data. If parity is set to NO , an additional stop bit is used
to force the frame size to 10 bits.
METER ADDRESS
0 99
? 00
Enter the serial node address. With a single unit, an address is not needed
and a value of zero can be used (RS232 applications). Otherwise, with multiple
bussed units, a unique address number must be assigned to each meter. The
node address applies specifically to RS485 applications.
ABBREVIATED PRINTING
NO YES
? NO
This parameter determines the formatting of data transmitted from the meter
in response to a Transmit Value command or a Block Print Request. Select NO
for a full print transmission, consisting of the meter address, mnemonics, and
parameter data. Select YES for abbreviated print transmissions, consisting of the
parameter data only. This setting is applied to all the parameters selected in the
PRINT OPTIONS. (Note: If the meter address is 0, the address will not be sent
during a full transmission.)
13
NO YES
? NO
This parameter is used to copy all the program settings from one CUB5
meter directly to another CUB5 meter, through the serial communications cards
(RS232 or RS485). The USB programming card cannot be used for the copy
procedure. No PC connection or additional software is required. Copying
program settings eliminates the need for repetitive programming when multiple
meters use identical settings.
Copy Requirements:
To copy program settings from one meter to another requires the following:
1. Both meters must have the same software version (Version 3.1 or later). The
version is displayed during the meter power-up sequence, or in Module 3 at
the Software Version Display parameter. (See Module 3 for details)
2. The meter receiving the program settings (receiver) must have the Baud Rate
set to 9600 baud. Since this is the factory default setting, a new meter will
arrive ready for copying. The meter sending the program settings (master)
should be set to the desired Baud Rate for the application (if different than
9600). This Baud Rate setting will then be copied to the receiver.
Copy Connections:
To connect the meters for copying, install a serial communications card of
the same type into each meter (RS232 or RS485). Connect the meters using the
proper cable listed in the chart.
TYPE DESCRIPTION PART NUMBER
RS232 Copy Cable RS232 10’ (RJ12-RJ12) CBLRLC02
RS485 Copy Cable RS485 10’ (RJ12-RJ12) CBLRLCS2
相关PDF资料 |
PDF描述 |
|---|---|
| CUB5TB00 | TIMER & CYCLE COUNTER W/BKLT |
| CUB7P200 | HSPEED LOGIC INPUT CNTR POS |
| CUB7T000 | TIMER LCD PROGRAM 8 DIGIT |
| CUB7W020 | COUNTER 8-DIGIT RED BKLT VOLT-IN |
| D-659-0001 | TOOL REMOVAL MTC CONN WAFER |
相关代理商/技术参数 |
参数描述 |
|---|---|
| CUB5RTB0 | 制造商:Red Lion Controls 功能描述:PANEL METER; RTD METER WITH RED/GREEN BACKLIGHT DISPLAY 制造商:Red Lion Controls 功能描述:RTD METER WITH RED/GREEN 制造商:Red Lion Controls 功能描述:TEMPERATURE DISPLAY FOR RTD 制造商:Red Lion Controls 功能描述:PANEL DISPLAY, TEMPERATURE, 95mA, 9V TO 28V; No. of Digits / Alpha:5; Meter Function:Temperature; Meter Range:-19999 to +19999; Digit Height:12.2mm; Panel Cutout Height:39.1mm; Panel Cutout Width:74.9mm |
| CUB5RTR0 | 功能描述:RTD METER REFLECTIVE RoHS:是 类别:工业控制，仪表 >> 仪表 - 面板，数字 系列:* 标准包装:12 系列:* 其它名称:Q7072030 |
| CUB5SNK0 | 功能描述:DUAL SINKING OPEN OC OUT CARD RoHS:是 类别:工业控制，仪表 >> 仪表 - 面板，数字 系列:* 标准包装:12 系列:* 其它名称:Q7072030 |
| CUB5TB00 | 功能描述:TIMER & CYCLE COUNTER W/BKLT RoHS:是 类别:工业控制，仪表 >> 计数器 系列:* 其它有关文件:Declaration of Conformity 标准包装:1 系列:99766 计数速率:25Hz 数字/字母数:5 输入类型:机电式脉冲 输出类型:- 电源电压:24V 显示器类型:十进制拨轮 |
| CUB5TCB0 | 功能描述:METER PANEL LCD THERMOCOUPLE RED RoHS:是 类别:工业控制，仪表 >> 仪表 - 面板，数字 系列:CUB5 标准包装:12 系列:* 其它名称:Q7072030 |
发布紧急采购，3分钟左右您将得到回复。