- 您现在的位置：买卖IC网 > PDF目录1205 > D12 ISA PC EVAL KIT (NXP Semiconductors)EVAL KIT FOR PDIUSBD12 USB EPP PDF资料下载
参数资料
| 型号： | D12 ISA PC EVAL KIT |
| 厂商： | NXP Semiconductors |
| 文件页数： | 7/14页 |
| 文件大小： | 0K |
| 描述： | EVAL KIT FOR PDIUSBD12 USB EPP |
| 标准包装： | 1 |
| 主要目的： | 接口，USB 2.0 主机/控制器 |
| 已用 IC / 零件： | PDIUSBD12 |
| 已供物品： | 板 |
| 相关产品： | 568-1092-6-ND - IC USB INTRFC W/PARL BUS 28TSSOP PDIUSBD12DTM-ND - IC USB INTRFC W/PARL BUS 28-SOIC PDIUSBD12PWAA-ND - IC USB INTRFC W/PARL BUS 28TSSOP 568-1092-1-ND - IC USB INTRFC W/PARL BUS 28TSSOP 568-1092-2-ND - IC USB INTRFC W/PARL BUS 28TSSOP 568-1091-5-ND - IC USB INTRFC W/PARL BUS 28-SOIC |
| 其它名称： | Q2544495 |
Interconnectivity
PDIUSBD12 Evaluation Board (PC Kit) User’s Manual
Page 7 of 14
REV. 2.1
Installation of firmware, INF and driver
The firmware, D12FW.EXE, runs on the device PC under DOS mode. When D12FW starts, it lights up
test LEDs on the evaluation board for 1 second. This means that the I/O address setting is correct.
And the evaluation board is disconnected and re-connected to USB by SoftConnect TM . If this is the
first time that the evaluation board is connected to host PC, host OS Device Manager will prompt
installation of INF and driver. Select the location of D12TEST.INF and D12TEST.SYS and complete
installation procedure.
Some useful key command is supported when the firmware is running.
Key
ESC
ENTER
i
v
Operation
Disconnect USB and quit PDIUSBD12 firmware.
Reconnect USB using SoftConnect TM .
Display firmware status information.
Switch on/off verbose mode, normally turned off for faster operation.
Using the Host Applet
The test applet, D12TEST.EXE, exercises all PDIUSBD12 endpoints. Testing of control endpoints can
be further done by standard USB Chapter 9 test programs.
The operation of each endpoint is designed according to its nature that is supported in PDIUSBD12.
Generic in and generic out endpoints has max packet size of 16 bytes and supports I/O access only.
So they are suitable for small size and low rate data transfer like keyboard and logic controls. The
main endpoints have max packet size of 64 bytes or 128 bytes with double buffering and DMA
support. So they are suitable for high data rate, large size data transfer.
_______________________________________________________________________________________________
Philips Semiconductors - Asia Product Innovation Centre
Visit http://www.flexiusb.com
相关PDF资料 |
PDF描述 |
|---|---|
| D13W3S17B5GX3CLF | CONN DSUB COMBO SKT 13W3 RA PCB |
| D15P13A6PV00LF | CONN DSUB PLUG 15POS T/H RA GOLD |
| D15P13B6UX00LF | CONN DSUB PLUG 15POS T/H RA GOLD |
| D15P33E4GV00LF | CONN DSUB PLUG 15POS R/A PCB SLD |
| D15P33E4GX00LF | CONN DSUB PLUG 15POS R/A PCB SLD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| D12K100 | 功能描述:线绕电阻器 - 底架安装 12watt 100ohm 10% Tubular Ceramic RoHS:否 制造商:Vishay/Dale 电阻:7 Ohms 容差:1 % 功率额定值:100 W 温度系数:50 PPM / C 系列:RH 工作温度范围:- 55 C to + 250 C 尺寸:46.02 mm Dia. x 46.02 mm W x 88.9 mm L x 44.45 mm H 封装:Bulk 产品:Power Resistors Wirewound Aluminum Housed |
| D12K100E | 功能描述:线绕电阻器 - 底架安装 12watt 100ohm 10% Tubular Ceramic RoHS:否 制造商:Vishay/Dale 电阻:7 Ohms 容差:1 % 功率额定值:100 W 温度系数:50 PPM / C 系列:RH 工作温度范围:- 55 C to + 250 C 尺寸:46.02 mm Dia. x 46.02 mm W x 88.9 mm L x 44.45 mm H 封装:Bulk 产品:Power Resistors Wirewound Aluminum Housed |
| D12K10K | 功能描述:线绕电阻器 - 底架安装 12watt 10K 10% Tubular Ceramic RoHS:否 制造商:Vishay/Dale 电阻:7 Ohms 容差:1 % 功率额定值:100 W 温度系数:50 PPM / C 系列:RH 工作温度范围:- 55 C to + 250 C 尺寸:46.02 mm Dia. x 46.02 mm W x 88.9 mm L x 44.45 mm H 封装:Bulk 产品:Power Resistors Wirewound Aluminum Housed |
| D12K10K-B | 制造商:Ohmite Mfg Co 功能描述: |
| D12K10KE | 功能描述:线绕电阻器 - 底架安装 12watt 10K 10% Tubular Ceramic RoHS:否 制造商:Vishay/Dale 电阻:7 Ohms 容差:1 % 功率额定值:100 W 温度系数:50 PPM / C 系列:RH 工作温度范围:- 55 C to + 250 C 尺寸:46.02 mm Dia. x 46.02 mm W x 88.9 mm L x 44.45 mm H 封装:Bulk 产品:Power Resistors Wirewound Aluminum Housed |
发布紧急采购，3分钟左右您将得到回复。