- 您现在的位置：买卖IC网 > PDF目录17103 > DC752A-B (Linear Technology)BOARD DAC LTC2704-16 PDF资料下载
参数资料
| 型号： | DC752A-B |
| 厂商： | Linear Technology |
| 文件页数： | 7/22页 |
| 文件大小： | 0K |
| 描述： | BOARD DAC LTC2704-16 |
| 软件下载： | QuikEval System |
| 设计资源： | DC752A Design File DC752A Schematic |
| 标准包装： | 1 |
| 系列： | QuikEval™, SoftSpan™ |
| DAC 的数量： | 4 |
| 位数： | 16 |
| 数据接口： | 串行，SPI? |
| 设置时间： | 10µs |
| DAC 型： | 电压 |
| 已供物品： | 板 |
| 已用 IC / 零件： | LTC2704-16 |
| 相关产品： | DC590B-ND - BOARD DEMO USB SERIAL CONTROLLER LTC2704IGW-16#TRPBF-ND - IC DAC 16BIT QUAD VOUT 44-SSOP LTC2704IGW-16#PBF-ND - IC DAC 16BIT QUAD VOUT 44-SSOP LTC2704CGW-16#TRPBF-ND - IC DAC 16BIT QUAD VOUT 44-SSOP LTC2704CGW-16#PBF-ND - IC DAC 16BIT QUAD VOUT 44-SSOP |
LTC2704
15
2704fd
Examples
1. Using a 24-bit loading sequence, load DAC A with the
unipolar range of 0V to 10V, output at zero volts and all
other DACs with the bipolar range of ±10V, outputs at
zero volts. Note all DAC outputs should change at the
same time.
a) CS/LD↓
b) Clock SDI = 0010 1111 0000 0000 0000 0011
c) CS/LD↑
B1-Range of all DACs set to bipolar ±10V.
d) CS/LD↓
Clock SDI = 0010 0000 0000 0000 0000 0001
e) CS/LD↑
B1-Range of DAC A set to unipolar 0V to 10V.
f) CS/LD↓
Clock SDI = 0011 1111 1000 0000 0000 0000
g) CS/LD↑
B1-Code of all DACs set to midscale.
h) CS/LD↓
Clock SDI = 0011 0000 0000 0000 0000 0000
i) CS/LD↑
B1-Code of DAC A set to zero code.
j) CS/LD↓
Clock SDI = 0100 1111 XXXX XXXX XXXX XXXX
k) CS/LD↑
Update all DACs B1s into B2s for both Code and
Range.
l) Alternatively steps j and k could be replaced with
LDAC
.
2. Using a 32-bit load sequence, load DAC C with bipolar
± 2.5V and its output at zero volts. Use readback to
check B1 contents before updating the DAC output
(i.e., before copying B1 contents into B2).
a) CS/LD↓ (Note that after power-on, the Code in B1 is
zero)
b) Clock SDI = 0000 0000 0011 0100 1000 0000 0000
0000
c) CS/LD↑
B1-Code of DAC C set to midscale setting.
d) CS/LD↓
Clock SDI = 0000 0000 0010 0100 0000 0000 0000
0100
e) Read Data out on SRO = 1000 0000 0000 0000
Veries that B1-Code DAC C is at midscale setting.
f) CS/LD↑
B1-Range of DAC C set to Bipolar ±2.5V range.
g) CS/LD↓
Clock SDI = 0000 0000 1010 0100 xxxx xxxx xxxx
xxxx
Data Out on SRO = 0000 0000 0000 0100
Veries that B1-Range of DAC C set to Bipolar ±2.5V
Range.
CS/LD↑
h) CS/LD↓
Clock SDI = 0000 0000 0100 0100 xxxx xxxx xxxx
xxxx
i) CS/LD↑
Update DAC C B1 into B2 for both Code and Range
j) Alternatively steps h and i could be replaced with
LDAC
.
System Offset Adjustment
Many systems require compensation for overall system
offset, which may be an order of magnitude or more greater
than the excellent offset of the LTC2704.
The LTC2704 has individual offset adjust pins for each
of the four DACs. VOSA, VOSB, VOSC and VOSD are
referred to their corresponding signal grounds, AGNDA,
AGNDB, AGNDC and AGNDD. For noise immunity and
ease of adjustment, the control voltage is attenuated to
the DAC output:
VOS = –0.01 V(VOSx) [0V to 5V, ±2.5V spans]
VOS = –0.02 V(VOSx) [0V to 10V, ±5V,
–2.5V to 7.5V spans]
VOS = –0.04 V(VOSx) [±10V span]
The nominal input range of these pins is ±5V; other refer-
ence voltages of up to ±15V may be used if needed.
The VOSx pins have an input impedance of 1MΩ. To pre-
serve the settling performance of the LTC2704, these pins
OPERATION
相关PDF资料 |
PDF描述 |
|---|---|
| AD9785-DPG2-EBZ | BOARD EVALUATION FOR AD9785 |
| EEM36DTMD-S189 | CONN EDGECARD 72POS R/A .156 SLD |
| EEM36DTMH-S189 | CONN EDGECARD 72POS R/A .156 SLD |
| 0210390421 | CABLE FLAT FLEX 1.18" 1MM 26POS |
| EVAL-AD5791SDZ | BOARD EVAL FOR AD5791 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DC756A | 制造商:Linear Technology 功能描述:BOARD DEMO LTC4150CMS 制造商:Linear Technology 功能描述:EVAL BOARD, LTC4150CMS BATTERY MONITOR |
| DC756KA-GB | 制造商:DEWALT 功能描述:DRILL 12V CHARGER W.UK-PLUG |
| DC757A-A | 制造商:Linear Technology 功能描述:BOARD DEMO LTC4302CMS-1 |
| DC757A-B | 制造商:Linear Technology 功能描述:BOARD DEMO LTC4302CMS-2 |
| DC757KA-GB | 制造商:DEWALT 功能描述:DRILL 14.4V |
发布紧急采购，3分钟左右您将得到回复。