参数资料
型号: DR-TRC105-372-EV
厂商: RFM
文件页数: 55/67页
文件大小: 0K
描述: BOARD EVALUATION 372MHZ RFM RFIC
标准包装: 1
类型: 收发器
频率: 365MHz ~ 380MHz
适用于相关产品: TRC105
已供物品: 2 个板,天线,电池
Configuration
MCFG00 bits 4..2
P
S
R
315 MHz
000
41
1
143
434 MHz
011
76
13
191
447 MHz
100
58
46
143
Table 73
The RF channel frequency for OOK transmit is:
F RXRF = (14.4*(75*(P + 1) + S)/(R + 1)) - F IF2 , with P, S in the range 0 to 255, R in the range of 64 to 169
Where F RXRF and the OOK 2
nd
IF frequency F IF2 are in MHz, and P, S, and R are divider integers where S must be
less than (P+1), and R has a value in the range of 64 to 169. An F IF2 value of 0.1 MHz is normally used. The val-
ues of P, S and R for OOK transmit operation on several common frequencies are given in Table 74 for a
0.1 MHz F IF2 . Software for determining P, S and R values is provided with the TRC105 development kit.
Configuration
MCFG00 bits 4..2
P
S
R
315 MHz
000
41
1
143
434 MHz
011
76
13
191
447 MHz
100
58
46
143
Table 74
6.6 TRC105 Data Mode Selection and Configuration
The TRC105 supports three data modes: Continuous, Buffered and Packet. Continuous data mode provides the
most formatting flexibility, but places the heaviest demand on host microcontroller resources and requires the
most custom firmware development. In contrast, the Packet data mode unloads the host processor and the appli-
cation firmware from handing tasks such as DC-balanced data encoding, packet frame assembly and disassem-
bly, error detection, packet filtering and FIFO buffering. The trade-off for Packet data mode is limited flexibility in
data formatting parameters such as packet frame design. Buffered data mode falls between Packet and Continu-
ous data mode capabilities, providing FIFO buffering, but allowing considerable flexibility in the design of the
packet frame.
Packet data mode is generally preferred as it supports the fastest application development time and requires the
smallest and least expensive host microcontroller. Buffered data mode covers applications that require a specific
packet frame design to support features such as multi-hop routing. Continuous data mode is reserved for special-
ized requirements, such as compatibility with a legacy product.
MCFG01 bits 7..6 select the data mode. A 00 bit pattern selects Continuous data mode. A 01 bit pattern selects
Buffered data mode. Bit patterns 10 or 11 select Packet data mode. The TRC105 configuration details for each
data mode are discussed below.
6.6.1 Continuous Data Mode
In Continuous data mode operation, transmitted data streams are applied to DATA Pin 20, and received data
streams are output on Pin 20. IRQ1 Pin 22 is usually configured to supply a clock signal to the host micro-
controller to pace the transmitted and received data steams. The clock signal is generated at the configured bit
rate. When transmitting, bits are clocked into Pin 20 on the low-to-high clock transitions at Pin 22.
www.RFM.com E-mail: info@rfm.com
? 2009-2013 by RF Monolithics, Inc.
Technical support +1.800.704.6079
Page 55 of 67
TRC105 - 05/29/13
相关PDF资料
PDF描述
DR-TRC105-345-EV BOARD EVALUATION 345MHZ RFM RFIC
GSCA06S3 SWITCH ROTARY SIDE
DR-TRC105-315-EV BOARD EVALUATION 315MHZ RFM RFIC
DR-TRC105-304-EV BOARD EVALUATION 304MHZ RFM RFIC
GSCA06S2 SWITCH ROTARY SIDE
相关代理商/技术参数
参数描述
DR-TRC105-390-DK 功能描述:射频开发工具 TRC105 Development Kit 382-398 MHz RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V
DR-TRC105-390-EV 功能描述:射频开发工具 TRC105 Evaluation Board 382-398 MHz RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V
DR-TRC105-403-DK 功能描述:射频开发工具 TRC105 Development Kit 402-407 MHz RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V
DR-TRC105-403-EV 功能描述:射频开发工具 TRC105 Evaluation Board 402-407 MHz RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V
DR-TRC105-434-DK 功能描述:射频开发工具 TRC105 Development Kit 416-436 MHz RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V