- 您现在的位置：买卖IC网 > PDF目录9370 > DS1308U-33+T (Maxim Integrated Products)IC RTC 56BYTE NVRAM I2C 8UMAX PDF资料下载
参数资料
| 型号： | DS1308U-33+T |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 14/16页 |
| 文件大小： | 0K |
| 描述： | IC RTC 56BYTE NVRAM I2C 8UMAX |
| 标准包装： | 3,000 |
| 类型： | 时钟/日历 |
| 特点： | 闰年，NVSRAM，方波输出 |
| 存储容量： | 56B |
| 时间格式： | HH:MM:SS（12/24 小时） |
| 数据格式： | YY-MM-DD-dd |
| 接口： | I²C，2 线串口 |
| 电源电压： | 3 V ~ 5.5 V |
| 电压 - 电源，电池： | 1.3 V ~ 5.5 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-TSSOP，8-MSOP（0.118"，3.00mm 宽） |
| 供应商设备封装： | 8-uMAX |
| 包装： | 带卷 (TR) |
DS1308
Low-Current I2C RTC with 56-Byte NV RAM
7
Maxim Integrated
Pin Configuration
Pin Description
PIN
NAME
FUNCTION
1
X1
32.768kHz Crystal Connections. The internal oscillator circuitry is designed for use with a crystal
having a specified load capacitance (CL) of 6pF.
Note: For more information about crystal selection and crystal layout considerations, refer to
Application Note 58: Crystal Considerations with Maxim Real-Time Clocks (RTCs).
2
X2
3
VBAT
Battery Supply Input for Lithium Cell or Other Energy Source. Battery voltage must be held between
the minimum and maximum limits for proper operation. Diodes placed in series between the backup
source and the VBAT pin can prevent proper operation. If a backup supply is not required, VBAT
must be grounded. UL recognized to ensure against reverse charging when used with a lithium cell.
4
GND
Ground
5
SDA
Serial Data Input/Output for the I2C serial interface. It is an open-drain output and requires an
external pullup resistor. The pullup voltage can be up to 5.5V, regardless of the voltage on VCC.
6
SCL
Serial Clock Input for the I2C serial interface. Used to synchronize data movement on the serial
interface. The pullup voltage can be up to 5.5V, regardless of the voltage on VCC.
7
SQW/CLKIN
Square-Wave Output/Clock Input. This I/O pin is used to output one of four square-wave
frequencies (1Hz, 4kHz, 8kHz, 32kHz) or accept an external clock input to drive the RTC counter.
In the output mode (ECLK = 0), it is open drain and requires an external pullup resistor. The
square-wave operates on VCC, or on VBAT with BBCLK = 1. The pullup voltage can be up to 5.5V,
regardless of the voltage on VCC. If not used, this pin may be left unconnected.
8
VCC
Primary Power Supply. Decouple the power supply with a 0.1FF capacitor to ground.
SOP
27
SQW/CLKIN
X2
18
VCC
X1
SCL
VBAT
36
SDA
GND
45
DS1308
TOP VIEW
+
相关PDF资料 |
PDF描述 |
|---|---|
| DS1308U-3+T | IC RTC 56BYTE NVRAM I2C 8UMAX |
| ISL23315WFUZ-T7A | IC DGTL POT 256POS 10K 10MSOP |
| DS1308U-18+T | IC RTC 56BYTE NVRAM I2C 8UMAX |
| DS1339AU+T | IC RTC I2C W/ALARM 8USOP |
| DS1307ZN+T&R/C02 | IC RTC SERIAL IND 8-SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS1310 | 制造商:未知厂家 制造商全称:未知厂家 功能描述: |
| DS13-1000 | 功能描述:固态继电器-PCB安装 HIGH FREQUENCY RELAY RoHS:否 制造商:Omron Electronics 控制电压范围: 负载电压额定值:40 V 负载电流额定值:120 mA 触点形式:1 Form A (SPST-NO) 输出设备:MOSFET 封装 / 箱体:USOP-4 安装风格:SMD/SMT |
| DS13-1000S | 制造商:TE Connectivity 功能描述:High Performance Solid State Relays |
| DS13-1001 | 制造商:MA-COM 制造商全称:M/A-COM Technology Solutions, Inc. 功能描述:DS13 Series High Performance Solid State Relays For Loads Up To 2A@60Vdc |
| DS13-1002 | 功能描述:固态继电器-PCB安装 DS13 SOLID STATE D RoHS:否 制造商:Omron Electronics 控制电压范围: 负载电压额定值:40 V 负载电流额定值:120 mA 触点形式:1 Form A (SPST-NO) 输出设备:MOSFET 封装 / 箱体:USOP-4 安装风格:SMD/SMT |
发布紧急采购，3分钟左右您将得到回复。