- 您现在的位置：买卖IC网 > PDF目录9359 > DS1846E-010+ (Maxim Integrated Products)IC NV TRI-POT MEM MON 20TSSOP PDF资料下载
参数资料
| 型号： | DS1846E-010+ |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 15/18页 |
| 文件大小： | 0K |
| 描述： | IC NV TRI-POT MEM MON 20TSSOP |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 74 |
| 接片： | 100，256 |
| 电阻（欧姆）： | 10k，100k |
| 电路数： | 3 |
| 温度系数： | 标准值 750 ppm/°C |
| 存储器类型： | 非易失 |
| 接口： | 3 线串行（设备位址） |
| 电源电压： | 4.5 V ~ 5.5 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 20-TSSOP（0.173"，4.40mm 宽） |
| 供应商设备封装： | 20-TSSOP |
| 包装： | 管件 |
| 产品目录页面： | 1430 (CN2011-ZH PDF) |
DS1846
6 of 18
DS1846 is not latched into EEPROM. Note that in order for eight bytes to be stored sequentially (and to
prevent looping around), the address byte must be set to the beginning of the desired page (three LSBs of
the address are 0). For detailed information concerning page operations, see the MEMORY
ORGANIZATION section.
The DS1846 is capable of an 8-byte page write. A page write is initiated the same way as a byte write, but
the master does not send a stop condition after the first data byte. Instead, after the slave acknowledges
receipt of the data byte, the master can send up to seven more data bytes using the same nine-clock
sequence. After a write to the last byte in the page, the address returns to the beginning of the page. The
master must terminate the write cycle with a stop condition or the data clocked into the DS1846 is not
latched into permanent memory.
Acknowledge Polling: Once the internally timed write has started and the DS1846 inputs are disabled,
acknowledge polling can be initiated. The process involves transmitting a start condition followed by the
device address. The R/W bit signifies the type of operation that is desired. The read or write sequence is
only allowed to proceed if the internal write cycle has completed and the DS1846 responds with a zero.
Read Operations: After receiving a matching address byte with the R/W bit set high, the device goes
into the read mode of operation. There are three read operations: current address read, random read, and
sequential address read.
CURRENT ADDRESS READ
The DS1846 has an internal address register that maintains the address used during the last read or write
operation, incremented by one. This data is maintained as long as VCC is valid. If the most recent address
was the last byte in memory, then the register resets to the first address. This address stays valid between
operations as long as power is available.
Once the device address is clocked in and acknowledged by the DS1846 with the R/W bit set to high, the
current address data word is clocked out. The master does not respond with a zero, but does generate a
stop condition afterwards.
RANDOM READ
A random read requires a dummy byte write sequence to load in the data word address. Once the device
address and data bytes are clocked in by the master, and acknowledged by the DS1846, the master must
generate another start condition. The master now initiates a current address read by sending the device
address with the R/W bit set high. The DS1846 acknowledges the device address and serially clocks out
the data byte.
SEQUENTIAL ADDRESS READ
Sequential reads are initiated by either a current address read or a random address read. After the master
receives the first data byte, the master responds with an acknowledge. As long as the DS1846 receives
this acknowledge after a byte is read, the master may clock out additional data words from the DS1846.
After reaching address FFh, it resets to address 00h.
The sequential read operation is terminated when the master initiates a stop condition. The master does
not respond with a zero.
For a more detailed description of 2-wire theory of operation, see the following section.
相关PDF资料 |
PDF描述 |
|---|---|
| VI-B3B-MW-F3 | CONVERTER MOD DC/DC 95V 100W |
| VE-B5D-IU-S | CONVERTER MOD DC/DC 85V 200W |
| VI-B3B-MW-F2 | CONVERTER MOD DC/DC 95V 100W |
| VE-B5B-IU-S | CONVERTER MOD DC/DC 95V 200W |
| VI-BND-IU-S | CONVERTER MOD DC/DC 85V 200W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS1846E-010/R | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:NV Tri-Potentiometer, Memory, and MicroMonitor |
| DS1846E-010/T | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:NV Tri-Potentiometer, Memory, and MicroMonitor |
| DS1846E-010/T&R | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:NV Tri-Potentiometer, Memory, and MicroMonitor |
| DS1846E-010+ | 功能描述:数字电位计 IC NV Tri-Potentiometer Memory/MicroMonitor RoHS:否 制造商:Maxim Integrated 电阻:200 Ohms 温度系数:35 PPM / C 容差:25 % POT 数量:Dual 每 POT 分接头:256 弧刷存储器:Volatile 缓冲刷: 数字接口:Serial (3-Wire, SPI) 描述/功能:Dual Volatile Low Voltage Linear Taper Digital Potentiometer 工作电源电压:1.7 V to 5.5 V 电源电流:27 uA 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:TQFN-16 封装:Reel |
| DS1846E-010+T&R | 制造商:Maxim Integrated Products 功能描述:DGTL POTENTIOMETER 100/256POS 10KOHM/100KOHM TRIPLE 20TSSOP - Tape and Reel 制造商:Maxim Integrated Products 功能描述:IC NV TRI-POT MEM MON 20TSSOP 制造商:Maxim Integrated Products 功能描述:Digital Potentiometer ICs NV Tri-Potentiometer Memory/MicroMonitor |
发布紧急采购，3分钟左右您将得到回复。