- 您现在的位置：买卖IC网 > PDF目录9359 > DS1846E-010+ (Maxim Integrated Products)IC NV TRI-POT MEM MON 20TSSOP PDF资料下载
参数资料
| 型号： | DS1846E-010+ |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 2/18页 |
| 文件大小： | 0K |
| 描述： | IC NV TRI-POT MEM MON 20TSSOP |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 74 |
| 接片： | 100，256 |
| 电阻（欧姆）： | 10k，100k |
| 电路数： | 3 |
| 温度系数： | 标准值 750 ppm/°C |
| 存储器类型： | 非易失 |
| 接口： | 3 线串行（设备位址） |
| 电源电压： | 4.5 V ~ 5.5 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 20-TSSOP（0.173"，4.40mm 宽） |
| 供应商设备封装： | 20-TSSOP |
| 包装： | 管件 |
| 产品目录页面： | 1430 (CN2011-ZH PDF) |
DS1846
10 of 18
DEVICE OPERATION
Power Monitor
The DS1846 detects out-of-tolerance power-supply conditions and warns a processor-based system of an
impending power failure. When VCC falls below the minimum VCC tolerance, a comparator asserts the
RST and RST signals. On power-up, RST and RST are kept active for a minimum of tRST to allow the
power supply and processor to stabilize.
Pushbutton Reset
The DS1846 provides an input pin for direct connection to a pushbutton reset (see Figure 4). The
pushbutton reset input requires an active-low signal. Internally, this input is debounced and timed such
that RST and RST signals of at least tRST minimum are generated. The tRST delay commences as the
pushbutton reset input is released from the low level. The pushbutton can be initiated by connecting the
NMI
output to the PBRST input as shown in Figure 4.
Nonmaskable Interrupt
The DS1846 generates a nonmaskable interrupt ( NMI ) for early warning of a power failure. A precision
comparator monitors the voltage level at the IN pin relative to an on-chip reference generated by an
internal bandgap. The IN pin is a high-impedance input allowing for a user-defined sense point. An
external resistor voltage-divider network (Figure 4) is used to set a trip point. This sense point may be
derived from a regulated supply or from a higher DC voltage level closer to the main system power input.
With the IN trip point, VTP, the proper values for R1 and R2 can be determined by the equation as shown
in Figure 4. Proper operation of the DS1846 requires that the voltage at the IN pin be limited to VCC.
Therefore, the maximum allowable voltage at the supply being monitored (VMAX) can also be derived as
shown in Figure 4. A simple approach to solving the equation is to select a value for R2 high enough to
keep power consumption low, and solve for R1. The flexibility of the IN input pin allows for detection of
power loss at the earliest point in a power-supply system, maximizing the amount of time for system
shut-down between NMI and RST/ RST .
When the supply being monitored decays to the voltage sense point, the DS1846 pulses the NMI output
to the active state for a minimum tNMI. During a power-up, any detected IN pin levels below VTP by the
comparator are disabled from generating an interrupt until VCC rises to VCCTP. As a result, any potential
NMI
pulse is not initiated until VCC reaches VCCTP.
Connecting NMI to PBRST allows the nonmaskable interrupt to generate an automatic reset when an out-
of-tolerance condition occurred in a monitored supply. An example is shown in Figure 4.
相关PDF资料 |
PDF描述 |
|---|---|
| VI-B3B-MW-F3 | CONVERTER MOD DC/DC 95V 100W |
| VE-B5D-IU-S | CONVERTER MOD DC/DC 85V 200W |
| VI-B3B-MW-F2 | CONVERTER MOD DC/DC 95V 100W |
| VE-B5B-IU-S | CONVERTER MOD DC/DC 95V 200W |
| VI-BND-IU-S | CONVERTER MOD DC/DC 85V 200W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS1846E-010/R | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:NV Tri-Potentiometer, Memory, and MicroMonitor |
| DS1846E-010/T | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:NV Tri-Potentiometer, Memory, and MicroMonitor |
| DS1846E-010/T&R | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:NV Tri-Potentiometer, Memory, and MicroMonitor |
| DS1846E-010+ | 功能描述:数字电位计 IC NV Tri-Potentiometer Memory/MicroMonitor RoHS:否 制造商:Maxim Integrated 电阻:200 Ohms 温度系数:35 PPM / C 容差:25 % POT 数量:Dual 每 POT 分接头:256 弧刷存储器:Volatile 缓冲刷: 数字接口:Serial (3-Wire, SPI) 描述/功能:Dual Volatile Low Voltage Linear Taper Digital Potentiometer 工作电源电压:1.7 V to 5.5 V 电源电流:27 uA 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:TQFN-16 封装:Reel |
| DS1846E-010+T&R | 制造商:Maxim Integrated Products 功能描述:DGTL POTENTIOMETER 100/256POS 10KOHM/100KOHM TRIPLE 20TSSOP - Tape and Reel 制造商:Maxim Integrated Products 功能描述:IC NV TRI-POT MEM MON 20TSSOP 制造商:Maxim Integrated Products 功能描述:Digital Potentiometer ICs NV Tri-Potentiometer Memory/MicroMonitor |
发布紧急采购，3分钟左右您将得到回复。