参数资料
型号: DS1977-F5#
厂商: Maxim Integrated
文件页数: 27/29页
文件大小: 0K
描述: IBUTTON EEPROM 32KBit F5
产品培训模块: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
RoHS指令信息: IButton RoHS Compliance Plan
标准包装: 14
系列: iButton®
存储容量: 32KB
存储器类型: EEPROM
产品目录页面: 1431 (CN2011-ZH PDF)
DS1977
MASTER MODE
TX
TX
(—)
RX
TX
RX
DATA (LSB FIRST)
7Fh
<Full-Access Password>
(Activate Strong Pullup for t PROG )
AAh
(Reset)
(Presence)
COMMENTS
Password Address)
TA2, Target Address = 7FC8h
Transmit Full-Access Password
Supply Power for Password Comparison
Check for Password Match; AAh = Match
Reset Pulse
Presence Pulse
Step 5
TX
TX
TX
CCh
0Fh
D0h
Issue Skip ROM Command
Issue Write Scratchpad Command
TA1, Target Address = D0h (Password
Control Register Address)
TX
TX
TX
RX
TX
TX
RX
RX
RX
RX
TX
RX
TX
TX
TX
TX
TX
TX
(—)
RX
TX
RX
7Fh
AAh
(Reset)
(Presence)
CCh
AAh
D0h
7Fh
10h
AAh
(Reset)
(Presence)
CCh
99h
D0h
7Fh
10h
<8 Bytes>
(Activate Strong Pullup for t PROG )
AAh
(Reset)
(Presence)
TA2, Target Address = 7FD0h
Write Password Enabling Pattern
Reset Pulse
Presence Pulse
Issue Skip ROM Command
Issue Read Scratchpad Command
Read TA1, Target Address = D0h
Read TA2, Target Address = 7FD0h
Read E/S-Byte
Verify Password Enabling Pattern
Reset Pulse
Presence Pulse
Issue Skip ROM Command
Issue Copy Scratchpad with Password
Command
TA1, Target Address = D0h
TA2, Target Address = 7FD0h
E/S-Byte
Transmit 8 Dummy Bytes as Password,
Because Passwords are Not Yet Enabled
Supply Power for Programming
Read to Check for Programming Success;
AAh Means Success
Reset Pulse
Presence Pulse
Instead of always using Skip ROM, one could use Read ROM first to learn the device's ROM identification (see
Example 1). For the next access one would use the Match ROM command and send the correct ROM identification
to address the device. Subsequent accesses could use the Resume command. This procedure ensures that
devices cannot be swapped during a communication session.
EXAMPLE 3
Task : write 10 data bytes starting at address 00A0h in page 2; read memory pages 2 and 3. The device has
passwords installed and activated. This task is broken into the following steps:
1. Write data to scratchpad
2. Read Scratchpad
3. Copy scratchpad
4. Read the entire memory page 3
5. Continue reading through the end of page 4
27 of 29
相关PDF资料
PDF描述
DS1982-F5+ IBUTTON 1KBit ADD-ONLY F5
DS1985-F3+ IBUTTON 16KBit ADD-ONLY F3
DS1990A-F3+ IC IBUTTON SERIAL NUMBER F3
DS1990R-F5# IBUTTON SERIAL NUMBER F5
DS1993L-F5+ IBUTTON MEMORY 4KBit F5
相关代理商/技术参数
参数描述
DS1977-F5# 功能描述:iButton Password-Protected 32KB EEPROM iButton RoHS:否 存储类型:SRAM 存储容量:512 B 组织: 工作电源电压:3 V to 5.25 V 接口类型:1-Wire 最大工作温度:+ 85 C 尺寸:17.35 mm x 5.89 mm 封装 / 箱体:F5 MicroCan 制造商:Maxim Integrated
DS1977-F5+ 功能描述:iButton RoHS:否 存储类型:SRAM 存储容量:512 B 组织: 工作电源电压:3 V to 5.25 V 接口类型:1-Wire 最大工作温度:+ 85 C 尺寸:17.35 mm x 5.89 mm 封装 / 箱体:F5 MicroCan 制造商:Maxim Integrated
DS1981U-F3-1125+ 功能描述:iButton RoHS:否 存储类型:SRAM 存储容量:512 B 组织: 工作电源电压:3 V to 5.25 V 接口类型:1-Wire 最大工作温度:+ 85 C 尺寸:17.35 mm x 5.89 mm 封装 / 箱体:F5 MicroCan 制造商:Maxim Integrated
DS1981U-F3-114C+ 功能描述:iButton RoHS:否 存储类型:SRAM 存储容量:512 B 组织: 工作电源电压:3 V to 5.25 V 接口类型:1-Wire 最大工作温度:+ 85 C 尺寸:17.35 mm x 5.89 mm 封装 / 箱体:F5 MicroCan 制造商:Maxim Integrated
DS1981U-F5-1124+ 功能描述:iButton RoHS:否 存储类型:SRAM 存储容量:512 B 组织: 工作电源电压:3 V to 5.25 V 接口类型:1-Wire 最大工作温度:+ 85 C 尺寸:17.35 mm x 5.89 mm 封装 / 箱体:F5 MicroCan 制造商:Maxim Integrated