参数资料
型号: DS21352LB
厂商: Maxim Integrated Products
文件页数: 135/137页
文件大小: 0K
描述: IC TXRX 1-CHIP T1 3.3V 100-LQFP
产品培训模块: Lead (SnPb) Finish for COTS
产品变化通告: Product Discontinuation 20/Feb/2012
标准包装: 90
功能: 单芯片收发器
接口: HDLC,T1
电路数: 1
电源电压: 3.14 V ~ 3.47 V
电流 - 电源: 75mA
工作温度: 0°C ~ 70°C
安装类型: 表面贴装
封装/外壳: 100-LQFP
供应商设备封装: 100-LQFP(14x14)
包装: 托盘
包括: DSX-1 和 CSU 线路补偿发生器,HDLC 控制器,带内回路代码发生器和检测器
DS21352/DS21552
97 of 137
18. TRANSMIT TRANSPARENCY
Each of the 24 T1 channels in the transmit direction of the framer can be either forced to be transparent or
in other words, can be forced to stop Bit 7 Stuffing and/or Robbed Signaling from overwriting the data in
the channels. Transparency can be invoked on a channel by channel basis by properly setting the TTR1,
TTR2, and TTR3 registers.
TTR1/TTR2/TTR3: TRANSMIT TRANSPARENCY REGISTER (Address=39 to
3B Hex)
(MSB)
(LSB)
CH8
CH7
CH6
CH5
CH4
CH3
CH2
CH1
TTR1 (39)
CH16
CH15
CH14
CH13
CH12
CH11
CH10
CH9
TTR2 (3A)
CH24
CH23
CH22
CH21
CH20
CH19
CH18
CH17
TTR3 (3B)
SYMBOLS
POSITIONS
NAME AND DESCRIPTION
CH1-24
TTR1.0-3.7
Transmit Transparency Registers.
0 = this DS0 channel is not transparent
1 = this DS0 channel is transparent
Each of the bit position in the Transmit Transparency Registers (TTR1/TTR2/TTR3) represent a DS0
channel in the outgoing frame. When these bits are set to a one, the corresponding channel is transparent
(or clear). If a DS0 is programmed to be clear, no robbed bit signaling will be inserted nor will the
channel have Bit 7 stuffing performed. However, in the D4 framing mode, bit 2 will be overwritten by a
zero when a Yellow Alarm is transmitted. Also the user has the option to prevent the TTR registers from
determining which channels are to have Bit 7 stuffing performed. If the TCR2.0 and TCR1.3 bits are set
to one, then all 24 T1 channels will have Bit 7 stuffing performed on them regardless of how the TTR
registers are programmed. In this manner, the TTR registers are only affecting which channels are to have
robbed bit signaling inserted into them.
19. JTAG-BOUNDARY SCAN ARCHITECTURE AND TEST ACCESS PORT
19.1 DESCRIPTION
The DS21352/552 IEEE 1149.1 design supports the standard instruction codes SAMPLE/PRELOAD,
BYPASS, and EXTEST. Optional public instructions included are HIGHZ, CLAMP, and IDCODE. See
Figure 19-1. The DS21352/552 contains the following as required by IEEE 1149.1 Standard Test Access
Port and Boundary Scan Architecture.
Test Access Port (TAP)
TAP Controller
Instruction Register
Bypass Register
Boundary Scan Register
Device Identification Register
相关PDF资料
PDF描述
DS21372TN IC TESTER BIT ERROR 3.3V 32-TQFP
DS2141AQN IC CONTROLLER T1 5V 44-PLCC
DS2143QN/T&R IC CONTROLLER E1 5V LP 44-PLCC
DS21448L IC LIU QUAD E1/T1/J1 128-LQFP
DS21455N+ IC LIU QUAD T1/E1/J1 256-BGA
相关代理商/技术参数
参数描述
DS21352LB+ 功能描述:网络控制器与处理器 IC T1 Single Chip Transceivers RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流(最大值):595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS21352LBN 制造商:Rochester Electronics LLC 功能描述: 制造商:Maxim Integrated Products 功能描述:
DS21352L-C02 功能描述:网络控制器与处理器 IC T1 Single Chip Transceivers RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流(最大值):595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS21352LN 功能描述:网络控制器与处理器 IC T1 Single Chip Transceivers RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流(最大值):595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS21352LN+ 功能描述:网络控制器与处理器 IC T1 Single Chip Transceivers RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流(最大值):595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray