收藏本站
参数资料
型号： DS21554L+
厂商： Maxim Integrated Products
文件页数： 118/124页
文件大小： 0K
描述： IC TXRX E1 1-CHIP 5V 100-LQFP
产品培训模块： Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装： 90
功能： 单芯片收发器
接口： E1，HDLC，J1，T1
电路数： 1
电源电压： 4.75 V ~ 5.25 V
电流 - 电源： 75mA
工作温度： 0°C ~ 70°C
安装类型： 表面贴装
封装/外壳： 100-LQFP
供应商设备封装： 100-LQFP（14x14）
包装： 托盘
包括： 远程和 AIS 警报检测器 / 发生器
产品目录页面： 1430 (CN2011-ZH PDF)
DS21354/DS21554 3.3V/5V E1 Single-Chip Transceivers
93 of 124
Select-IR-Scan
All test registers retain their previous state. The instruction register will remain unchanged during this
state. With JTMS LOW, a rising edge on JTCLK moves the controller into the Capture-IR state and will
initiate a scan sequence for the instruction register. JTMS HIGH during a rising edge on JTCLK puts the
controller back into the Test-Logic-Reset state.
Capture-IR
The Capture-IR state is used to load the shift register in the instruction register with a fixed value. This
value is loaded on the rising edge of JTCLK. If JTMS is HIGH on the rising edge of JTCLK, the
controller will enter the Exit1-IR state. If JTMS is LOW on the rising edge of JTCLK, the controller will
enter the Shift-IR state.
Shift-IR
In this state, the shift register in the instruction register is connected between JTDI and JTDO and shifts
data one stage for every rising edge of JTCLK towards the serial output. The parallel register, as well as
all test registers, remain at their previous states. A rising edge on JTCLK with JTMS HIGH will move the
controller to the Exit1-IR state. A rising edge on JTCLK with JTMS LOW will keep the controller in the
Shift-IR state while moving data one stage thorough the instruction shift register.
Exit1-IR
A rising edge on JTCLK with JTMS LOW will put the controller in the Pause-IR state. If JTMS is HIGH
on the rising edge of JTCLK, the controller will enter the Update-IR state and terminate the scanning
process.
Pause-IR
Shifting of the instruction shift register is halted temporarily. With JTMS HIGH, a rising edge on JTCLK
will put the controller in the Exit2-IR state. The controller will remain in the Pause-IR state if JTMS is
LOW during a rising edge on JTCLK.
Exit2-IR
A rising edge on JTCLK with JTMS LOW will put the controller in the Update-IR state. The controller
will loop back to Shift-IR if JTMS is HIGH during a rising edge of JTCLK in this state.
Update-IR
The instruction code shifted into the instruction shift register is latched into the parallel output on the
falling edge of JTCLK as the controller enters this state. Once latched, this instruction becomes the
current instruction. A rising edge on JTCLK with JTMS LOW, will put the controller in the Run-Test-
Idle state. With JTMS HIGH, the controller will enter the Select-DR-Scan state.
相关PDF资料
PDF描述
S9S08SG32E1MTG MCU 32K FLASH 16-TSSOP
MC9S08JM8CLC MCU 8BIT 8K FLASH 32-LQFP
DS21352L+ IC TXRX T1 1-CHIP 3.3V 100-LQFP
MC9S08AC16CBE IC MCU 8BIT 16K FLASH 42SDIP
DS21352LB+ IC TXRX T1 1-CHIP 3.3V 100-LQFP
相关代理商/技术参数
参数描述
DS21554L+ 功能描述:网络控制器与处理器 IC 3.3/5V E1 Transceiver RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流（最大值）:595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS21554LB 功能描述:网络控制器与处理器 IC 3.3/5V E1 Transceiver RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流（最大值）:595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS21554LB+ 功能描述:网络控制器与处理器 IC 3.3/5V E1 Transceiver RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流（最大值）:595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS21554LBN 功能描述:网络控制器与处理器 IC RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流（最大值）:595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS21554LBN+ 功能描述:网络控制器与处理器 IC 3.3/5V E1 Transceiver RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流（最大值）:595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*