参数资料
型号: DS21554LBN+
厂商: Maxim Integrated Products
文件页数: 41/124页
文件大小: 0K
描述: IC TXRX E1 5V 100-LQFP
产品培训模块: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装: 90
功能: 单芯片收发器
接口: E1,HDLC,J1,T1
电路数: 1
电源电压: 4.75 V ~ 5.25 V
电流 - 电源: 75mA
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 100-LQFP
供应商设备封装: 100-LQFP(14x14)
包装: 托盘
包括: 远程和 AIS 警报检测器 / 发生器
DS21354/DS21554 3.3V/5V E1 Single-Chip Transceivers
23 of 124
3.1.6.
Line Interface Pins
Signal Name:
MCLK
Signal Description:
Master Clock Input
Signal Type:
Input
A 2.048MHz (±50ppm) clock source with TTL levels is applied at this pin. This clock is used internally
for both clock/data recovery and for jitter attenuation. A quartz crystal of 2.048MHz may be applied
across MCLK and XTALD instead of the TTL level clock source.
Signal Name:
XTALD
Signal Description:
Quartz Crystal Driver
Signal Type:
Output
A quartz crystal of 2.048MHz may be applied across MCLK and XTALD instead of a TTL level clock
source at MCLK. Leave open circuited if a TTL clock source is applied at MCLK.
Signal Name:
8XCLK
Signal Description:
Eight-Times Clock
Signal Type:
Output
A 16.384MHz clock that is frequency locked to the 2.048MHz clock provided from the clock/data
recovery block (if the jitter attenuator is enabled on the receive side) or from the TCLKI pin (if the jitter
attenuator is enabled on the transmit side). Can be internally disabled via TEST2 register if not needed.
Signal Name:
LIUC
Signal Description:
Line Interface Connect
Signal Type:
Input
Tie low to separate the line interface circuitry from the framer/formatter circuitry and activate the
TPOSI/TNEGI/TCLKI/RPOSI/RNEGI/RCLKI pins. Tie high to connect the line interface circuitry to the
framer/formatter circuitry and deactivate the TPOSI/TNEGI/TCLKI/RPOSI/RNEGI/RCLKI pins. When
LIUC is tied high, the TPOSI/TNEGI/TCLKI/ RPOSI/RNEGI/RCLKI pins should be tied low.
Signal Name:
RTIP and RRING
Signal Description:
Receive Tip and Ring
Signal Type:
Input
Analog inputs for clock recovery circuitry. These pins connect via a 1:1 transformer to the E1 line. See
Section 15 for details.
Signal Name:
TTIP and TRING
Signal Description:
Transmit Tip and Ring
Signal Type:
Output
Analog line-driver outputs. These pins connect via a step-up transformer to the E1 line. See Section 15
for details.
相关PDF资料
PDF描述
DS21552LN+ IC TXRX T1 1-CHIP 5V 100-LQFP
DS2174Q+T&R IC BERT ENHANCED 44-PLCC
DS2155G+T&R IC TXRX T1/E1/J1 1 CHIP 100CSBGA
DS2155G+ IC TXRX T1/E1/J1 1-CHIP 100CSBGA
DS2155G IC TXRX T1/E1/J1 1-CHIP 100CSBGA
相关代理商/技术参数
参数描述
DS21554LBN+ 功能描述:网络控制器与处理器 IC 3.3/5V E1 Transceiver RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流(最大值):595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS21554LN 功能描述:网络控制器与处理器 IC 3.3/5V E1 Transceiver RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流(最大值):595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS21554LN+ 功能描述:网络控制器与处理器 IC 3.3/5V E1 Transceiver RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流(最大值):595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS2155DK 功能描述:网络开发工具 RoHS:否 制造商:Rabbit Semiconductor 产品:Development Kits 类型:Ethernet to Wi-Fi Bridges 工具用于评估:RCM6600W 数据速率:20 Mbps, 40 Mbps 接口类型:802.11 b/g, Ethernet 工作电源电压:3.3 V