参数资料
型号: DS21Q58L
厂商: Maxim Integrated Products
文件页数: 15/74页
文件大小: 0K
描述: IC TXRX E1 QUAD 3.3V 100-LQFP
产品培训模块: Lead (SnPb) Finish for COTS
产品变化通告: Product Discontinuation 20/Feb/2012
标准包装: 90
功能: 收发器
接口: E1
电路数: 4
电源电压: 3.14 V ~ 3.47 V
电流 - 电源: 230mA
工作温度: 0°C ~ 70°C
安装类型: 表面贴装
封装/外壳: 100-LQFP
供应商设备封装: 100-LQFP(14x14)
包装: 托盘
包括: AIS 警报检测器和发生器,回送功能,PRBS 发生器 / 检测器,远程检测器和发生器
DS21Q58 E1 Quad Transceiver
22 of 74
8.3 Automatic Alarm Generation
The device can be programmed to automatically transmit AIS or remote alarm. When automatic AIS generation is
enabled (CCR2.5 = 1), the device monitors the receive framer to determine if any of the following conditions are
present: loss-of-receive frame synchronization, AIS alarm (all ones) reception, or loss-of-receive carrier (or signal).
If one (or more) of these conditions is present, the framer forces an AIS alarm.
When automatic RAI generation is enabled (CCR2.4 = 1), the receiver is monitored to determine if any of the
following conditions are present: loss-of-receive frame synchronization, AIS alarm (all ones) reception, or loss-of-
receive carrier (or signal), or if CRC4 multiframe synchronization cannot be found within 128ms of FAS
synchronization (if CRC4 is enabled). If one (or more) of these conditions is present, the device transmits an RAI
alarm. RAI generation conforms to ETS 300 011 specifications, and a constant remote alarm is transmitted if the
DS21Q58 cannot find CRC4 multiframe synchronization within 400ms as per G.706.
Register Name:
CCR3
Register Description:
Common Control Register
Register Address:
14 Hex
Bit #
7
6
5
4
3
2
1
0
Name
RLB
LLB
LIAIS
TCM4
TCM3
TCM2
TCM1
TCM0
NAME
BIT
FUNCTION
RLB
7
Remote Loopback. See Section 8.4 for details.
0 = loopback disabled
1 = loopback enabled
LLB
6
Local Loopback. See Section 8.5 for details.
0 = loopback disabled
1 = loopback enabled
LIAIS
5
Line Interface AIS-Generation Enable
0 = allow normal data to be transmitted at TTIP and TRING
1 = force unframed all ones to be transmitted at TTIP and TRING at the
MCLK rate
TCM4
4
Transmit Channel Monitor Bit 4. MSB of a channel decode that
determines which transmit channel data appears in the TDS0M register.
See Section 10 or details.
TCM3
3
Transmit Channel Monitor Bit 3
TCM2
2
Transmit Channel Monitor Bit 2
TCM1
1
Transmit Channel Monitor Bit 1
TCM0
0
Transmit Channel Monitor Bit 0. LSB of the channel decode.
8.4 Remote Loopback
When CCR4.7 is set to 1, the DS21Q58 is forced into remote loopback (RLB) mode. In this loopback, data input
through the RPOSI and RNEGI pins is transmitted back to the TPOSO and TNEGO pins. Data continues to pass
through the DS21Q58’s receive framer as it would normally and the data from the transmit formatter is ignored
相关PDF资料
PDF描述
DS2404B IC ECONORAM TIMECHIP 5.5V 16SSOP
DS2415P+T&R IC TIME CHIP 1-WIRE 6-TSOC
DS2417X/T&R IC TIMECHIP W/INTRPT 1WIRE CSP
DS26502LN+ IC T1/E1/J1 64KCC ELEMENT 64LQFP
DS26503LN+ IC T1/E1/J1 BITS ELEMENT 64-LQFP
相关代理商/技术参数
参数描述
DS21Q58L+ 功能描述:网络控制器与处理器 IC Quad E1 Transceiver RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流(最大值):595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS21Q58LN 功能描述:网络控制器与处理器 IC RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流(最大值):595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS21Q58LN+ 功能描述:网络控制器与处理器 IC Quad E1 Transceiver RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流(最大值):595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS21Q59 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:RELIABILITY REPORT FOR DS21Q59, REV A2
DS21Q59DK 功能描述:网络开发工具 DS21Q59 Dev Kit RoHS:否 制造商:Rabbit Semiconductor 产品:Development Kits 类型:Ethernet to Wi-Fi Bridges 工具用于评估:RCM6600W 数据速率:20 Mbps, 40 Mbps 接口类型:802.11 b/g, Ethernet 工作电源电压:3.3 V