- 您现在的位置：买卖IC网 > PDF目录20671 > DS2740BU+T&R (Maxim Integrated)IC CURRENT GAUGE(15BIT) 8UMAX PDF资料下载
参数资料
| 型号： | DS2740BU+T&R |
| 厂商： | Maxim Integrated |
| 文件页数： | 6/16页 |
| 文件大小： | 304K |
| 描述： | IC CURRENT GAUGE(15BIT) 8UMAX |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 3,000 |
| 功能： | 电流计（13 位） |
| 输入电压： | 2.7 V ~ 5.5 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-TSSOP，8-MSOP（0.118"，3.00mm 宽） |
| 供应商设备封装： | 8-uMAX |
| 包装： | 带卷 (TR) |
DS2740
6 of 16
CURRENT RESOLUTION (1 LSB)
R
SNS
PART
CONVERSION
TIME
V
IS1
- V
IS2
20m?
15m?
10m?
5m?
DS2740U
3.515s
1.5625糣 78.13糀 104.2糀 156.3糀 312.5糀
DS2740BU
0.878s
6.250糣 312.5糀 416.7糀 625糀
1.250mA
Every 1024th conversion, the ADC measures its input offset to facilitate offset correction. Offset
correction occurs approximately once per hour in the DS2740U and four times per hour in the
DS2740BU. The resulting correction factor is applied to the subsequent 1023 measurements. During the
offset correction conversion, the ADC does not measure the IS1 to IS2 signal. A maximum error of
1/1024 in the accumulated current register (ACR) is possible, however, to reduce the error, the current
measurement just prior to the offset conversion is displayed in the current register and is substituted for
the dropped current measurement in the current accumulation process. The typical error due to offset
correction is much less than 1/1024.
CURRENT ACCUMULATOR
Current measurements are internally summed, or accumulated, at the completion of each conversion
period with the results displayed in the ACR. The accuracy of the ACR is dependent on both the current
measurement and the conversion timebase. The ACR has a range of ?04.8mVh with a LSb of
6.25糣h. Additional registers hold fractional results of each accumulation, however, these bits are not
user accessible.
Read and write access is allowed to the ACR. Whenever the ACR is written, fractional accumulation
results are cleared. Also, a write forces the ADC to measure its offset and update the offset correction
factor. The current measurement and accumulation begin with the second conversion following a write to
the ACR. Figure 4 describes the ACR address, format, and resolution.
Figure 4. CURRENT ACCUMULATOR FORMAT
MSBAddress 10h LSBAddress 11h
S 2
14
2
13
2
12
2
11
2
10
2
9
2
8
2
7
2
6
2
5
2
4
2
3
2
2
2
1
2
0
MSb LSb MSb LSb
Units: 6.25糣h/R
SNS
ACR LSB
R
SNS
PART
UPDATE
INTERVAL
V
IS1
- V
IS2
20m?
15m?
10m?
5m?
DS2740U
3.515s
DS2740BU 0.878s
6.25糣h 312.5糀h 416.7糀h 625糀h
1.250mAh
相关PDF资料 |
PDF描述 |
|---|---|
| MAX4995AATA+T | IC SWITCH CURRENT LIMIT 8TDFN |
| TC1303B-VS0EUNTR | IC REG DL BCK/LINEAR SYNC 10MSOP |
| TC1303B-VS0EUN | IC REG DL BCK/LINEAR SYNC 10MSOP |
| B160-E3/5AT | DIODE SCHOTTKY 1A 60V SMA |
| TC1303B-PI0EUNTR | IC REG DL BCK/LINEAR SYNC 10MSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS2740EVKIT+ | 制造商:Maxim Integrated Products 功能描述:HIGH-PRECISION COULOMB COUNTER - Boxed Product (Development Kits) |
| DS2740K | 功能描述:电源管理IC开发工具 RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V |
| DS2740U | 制造商:Maxim Integrated Products 功能描述:HI PRECISION COUL CNTR UMAX(USOP)-8 - Rail/Tube |
| DS2740U/R | 制造商:DALLAS 制造商全称:Dallas Semiconductor 功能描述:High-Precision Coulomb Counter |
| DS2740U/T | 制造商:DALLAS 制造商全称:Dallas Semiconductor 功能描述:High-Precision Coulomb Counter |
发布紧急采购，3分钟左右您将得到回复。