参数资料
型号: DS2781E+
厂商: Maxim Integrated Products
文件页数: 8/31页
文件大小: 0K
描述: IC FUEL GAUGE BATT 8TSSOP
产品培训模块: 1-Wire Communications
Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装: 1
功能: 燃料,电量检测计/监控器
电池化学: 锂离子(Li-Ion)、锂聚合物(Li-Pol)
电源电压: 2.5 V ~ 10 V
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 8-TSSOP(0.173",4.40mm 宽)
供应商设备封装: 8-TSSOP
包装: 管件
产品目录页面: 1436 (CN2011-ZH PDF)
DS2781
Figure 5. Current Register Format
CURRENT
MSB—Address 0Eh
LSB—Address 0Fh
Read Only
S
2 14
2 13
2 12
2 11
2 10
2 9
2 8
2 7
2 6
2 5
2 4
2 3
2 2
2 1
2 0
MSb
“S”: sign bit(s)
LSb
MSb
Units:
LSb
1.5625 μ V/Rsns
CURRENT RESOLUTION (1 LSB)
V SS - V SNS
1.5625 μ V
20m Ω
78.13 μ A
15m Ω
104.2 μ A
R SNS
10m Ω
156.3 μ A
5m Ω
312.5 μ A
CURRENT OFFSET CORRECTION
Every 1024th conversion, the ADC measures its input offset to facilitate offset correction. Offset correction occurs
approximately once per hour. The resulting correction factor is applied to the subsequent 1023 measurements.
During the offset correction conversion, the ADC does not measure the sense resistor signal. A maximum error of
1/1024 in the accumulated current register (ACR) is possible; however, to reduce the error, the current
measurement made just prior to the offset conversion is displayed in the current register and is substituted for the
dropped current measurement in the current accumulation process. This results in an accumulated current error
due to offset correction of less than 1/1024.
CURRENT OFFSET BIAS
The Current Offset Bias (COB) register allows a programmable offset value to be added to raw current
measurements. The result of the raw current measurement plus COB is displayed as the current measurement
result in the CURRENT register, and is used for current accumulation. COB can be used to correct for a static
offset error, or can be used to intentionally skew the current results and therefore the current accumulation.
Read and write access is allowed to COB. Whenever the COB is written, the new value is applied to all subsequent
current measurements. COB can be programmed in 1.56 μ V steps to any value between +198.1 μ V and -199.7 μ V.
The COB value is stored as a two’s complement value in volatile memory, and must be initialized through the
interface on power-up.
Figure 6. Current Offset Bias Register Format
Address 7B
S
2 6
2 5
2 4
2 3
2 2
2 1
2 0
MSb
LSb
“S”: sign bit(s)
8 of 31
Units:
1.56 μ V/Rsns
相关PDF资料
PDF描述
EBM15DSEF-S243 CONN EDGECARD 30POS .156 EYELET
SLP332M050C3P3 CAP ALUM 3300UF 50V 20% SNAP
REC15-2415SZ/H3 CONV DC/DC 15W 24VIN 15VOUT
RBM18DSEF-S13 CONN EDGECARD 36POS .156 EXTEND
REC15-245.1SZ/H3 CONV DC/DC 15W 24VIN 5.1VOUT
相关代理商/技术参数
参数描述
DS2781E+ 功能描述:电池管理 1-2 Cell Stand-Alone Fuel Gauge RoHS:否 制造商:Texas Instruments 电池类型:Li-Ion 输出电压:5 V 输出电流:4.5 A 工作电源电压:3.9 V to 17 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:VQFN-24 封装:Reel
DS2781E+T&R 制造商:Maxim Integrated Products 功能描述:FUEL GAUGE 制造商:Maxim Integrated Products 功能描述:STANDALONE FUEL GAUGE IC 8TSSOP - Tape and Reel 制造商:Maxim Integrated Products 功能描述:IC FUEL GAUGE BATT 8TSSOP
DS2781E+T&R 功能描述:电池管理 1-2 Cell Stand-Alone Fuel Gauge RoHS:否 制造商:Texas Instruments 电池类型:Li-Ion 输出电压:5 V 输出电流:4.5 A 工作电源电压:3.9 V to 17 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:VQFN-24 封装:Reel
DS2781E+TR 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:1-Cell or 2-Cell Standalone Fuel Gauge IC
DS2781E-C1+T&R 功能描述:电池管理 RoHS:否 制造商:Texas Instruments 电池类型:Li-Ion 输出电压:5 V 输出电流:4.5 A 工作电源电压:3.9 V to 17 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:VQFN-24 封装:Reel