- 您现在的位置：买卖IC网 > PDF目录1788 > DS2784G+T&R (Maxim Integrated Products)IC FUEL GAUGE STND-ALONE 14-TDFN PDF资料下载
参数资料
| 型号： | DS2784G+T&R |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 36/43页 |
| 文件大小： | 0K |
| 描述： | IC FUEL GAUGE STND-ALONE 14-TDFN |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 2,500 |
| 功能： | 燃料，电量检测计/监控器 |
| 电池化学： | 锂离子（Li-Ion）、锂聚合物（Li-Pol） |
| 电源电压： | 2.5 V ~ 4.6 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 14-WFDFN 裸露焊盘 |
| 供应商设备封装： | 14-TDFN-EP（3x5） |
| 包装： | 带卷 (TR) |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页当前第36页第37页第38页第39页第40页第41页第42页第43页
DS2784: 1-Cell Stand-Alone Fuel Gauge IC with Li+ Protector and SHA-1 Authentication
FUNCTION COMMANDS
After successfully completing one of the net address commands, the bus master can access the features of the
DS2784 with any of the function commands described in the following paragraphs. The name of each function is
followed by the 8-bit op code for that command in square brackets. The function commands are summarized below
in Table 11.
Read Data [69h, XX]. This command reads data from the DS2784 starting at memory address XX. The LSb of the
data in address XX is available to be read immediately after the MSb of the address has been entered. Because
the address is automatically incremented after the MSb of each byte is received, the LSb of the data at address
XX + 1 is available to be read immediately after the MSb of the data at address XX. If the bus master continues to
read beyond address FFh, data is read starting at memory address 00 and the address is automatically
incremented until a reset pulse occurs. Addresses labeled “Reserved” in the memory map contain undefined data
values. The Read Data command can be terminated by the bus master with a reset pulse at any bit boundary.
Reads from EEPROM block addresses return the data in the shadow RAM. A Recall Data command is required to
transfer data from the EEPROM to the shadow. See Table 7 for more details.
Write Data [6Ch, XX]. This command writes data to the DS2784 starting at memory address XX. The LSb of the
data to be stored at address XX can be written immediately after the MSb of address has been entered. Because
the address is automatically incremented after the MSb of each byte is written, the LSb to be stored at address XX
+ 1 can be written immediately after the MSb to be stored at address XX. If the bus master continues to write
beyond address FFh, the data starting at address 00 is overwritten. Writes to read-only addresses, reserved
addresses and locked EEPROM blocks are ignored. Incomplete bytes are not written. Writes to unlocked EEPROM
block addresses modify the shadow RAM. A Copy Data command is required to transfer data from the shadow to
the EEPROM. See Table 7 for more details.
Copy Data [48h, XX]. This command copies the contents of the EEPROM shadow RAM to EEPROM cells for the
EEPROM block containing address XX. Copy Data commands that address locked blocks are ignored. While the
copy data command is executing, the EEC bit in the EEPROM register is set to 1 and writes to EEPROM
addresses are ignored. Reads and writes to non-EEPROM addresses can still occur while the copy is in progress.
The Copy Data command takes t EEC time to execute, starting on the next falling edge after the address is
transmitted.
Recall Data [B8h, XX]. This command recalls the contents of the EEPROM cells to the EEPROM shadow memory
for the EEPROM block containing address XX.
Lock [6Ah, XX]. This command locks (write protects) the block of EEPROM containing address XX. The lock bit in
the EEPROM register must be set to 1 before the Lock command is executed. To help prevent unintentional locks,
one must issue the Lock command immediately after setting the lock bit (EEPROM register, address 1Fh, bit 06) to
a 1. If the lock bit is 0 or if setting the lock bit to 1 does not immediately precede the Lock command, the Lock
command has no effect. The Lock command is permanent; a locked block can never be written again.
iButton is a registered trademark of Maxim Integrated Products, Inc.
36 of 43
相关PDF资料 |
PDF描述 |
|---|---|
| DS2786BG+T&R | IC FUEL GAUGE OCV-BASED 10-TDFN |
| DS2786G-5+T&R | IC FUEL GAUGE OCV-BASED 10-TDFN |
| DS2788E+T&R | IC FUEL GAUGE W/DSP DRV 14TSSOP |
| DS2790G+T&R | IC FUEL GAUGE BATT 28-TDFN |
| DS3881E+T&R | IC CCFL CONTROL 24TSSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS2784K | 功能描述:电源管理IC开发工具 RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V |
| DS2786 | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:Standalone OCV-Based Fuel Gauge |
| DS2786_09 | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:Stand-Alone OCV-Based Fuel Gauge |
| DS2786B | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:Stand-Alone OCV-Based Fuel Gauge |
| DS2786BEVKIT+ | 制造商:Maxim Integrated Products 功能描述:STANDALONE OCV-BASED FUEL GAUGE - Boxed Product (Development Kits) |
发布紧急采购，3分钟左右您将得到回复。