- 您现在的位置：买卖IC网 > PDF目录9189 > DS3503U+T&R (Maxim Integrated Products)IC POT DGTL NV 128TAP 10-MSOP PDF资料下载
参数资料
| 型号： | DS3503U+T&R |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 3/13页 |
| 文件大小： | 0K |
| 描述： | IC POT DGTL NV 128TAP 10-MSOP |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 3,000 |
| 接片： | 128 |
| 电阻（欧姆）： | 5k |
| 电路数： | 2 |
| 温度系数： | 标准值 4 ppm/°C |
| 存储器类型： | 非易失 |
| 接口： | I²C（设备位址） |
| 电源电压： | 2.7 V ~ 3.6 V |
| 工作温度： | -40°C ~ 100°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 10-TFSOP，10-MSOP（0.118"，3.00mm 宽） |
| 供应商设备封装： | 10-µMAX |
| 包装： | 带卷 (TR) |
DS3503
NV, I2C, Stepper Potentiometer
______________________________________________________________________________________
11
Reading a single byte from a slave: Unlike the write
operation that uses the specified memory address byte
to define where the data is to be written, the read opera-
tion occurs at the present value of the memory address
counter. To read a single byte from the slave, the master
generates a START condition, writes the slave address
byte with R/W = 1, reads the data byte with a NACK to
indicate the end of the transfer, and generates a STOP
condition. However, because requiring the master to
keep track of the memory address counter is impracti-
cal, the following method should be used to perform
reads from a specified memory location.
Manipulating the address counter for reads: A dummy
write cycle can be used to force the address counter to a
particular value. To do this the master generates a
START condition, writes the slave address byte (R/W =
0), writes the memory address where it desires to read,
generates a repeated START condition, writes the slave
address byte (R/W = 1), reads data with ACK or NACK
as applicable, and generates a STOP condition.
See Figure 3 for a read example using the repeated
START condition to specify the starting memory location.
Applications Information
Power-Supply Decoupling
To achieve the best results when using the DS3503,
decouple both the power-supply pin (VCC) and the
wiper-bias voltage pin (V+) with a 0.01F or 0.1F
capacitor. Use a high-quality ceramic surface-mount
capacitor if possible. Surface-mount components mini-
mize lead inductance, which improves performance,
and ceramic capacitors tend to have adequate high-
frequency response for decoupling applications.
SDA and SCL Pullup Resistors
SDA is an I/O with an open-collector output that
requires a pullup resistor to realize high-logic levels. A
master using either an open-collector output with a
pullup resistor or a push-pull output driver must be
used for SCL. Pullup resistor values should be chosen
to ensure that the rise and fall times listed in the
I2C AC
Electrical Characteristics are within specification. A typ-
ical value for the pullup resistors is 4.7k
Ω.
SLAVE
ADDRESS
START
0
1
0
1
0
R/W
SLAVE
ACK
SLAVE
ACK
SLAVE
ACK
MSB
LSB
MSB
LSB
MSB
LSB
b7
b6
b5
b4
b3
b2
b1
b0
READ/
WRITE
REGISTER ADDRESS
b7
b6
b5
b4
b3
b2
b1
b0
DATA
STOP
SINGLE-BYTE WRITE
-WRITE STEP CONTROL
REGISTER (SCR) TO 1Fh
SINGLE-BYTE READ
-READ CONTROL REGISTER (CR)
START
REPEATED
START
51h
MASTER
NACK
STOP
01010000
00000 010
02h
01010 001
01010000
00000 001
00011111
50h
01h
1Fh
STOP
DATA
EXAMPLE I2C TRANSACTIONS
TYPICAL I2C WRITE TRANSACTION
50h
A)
B)
SLAVE
ACK
SLAVE
ACK
SLAVE
ACK
SLAVE
ACK
SLAVE
ACK
SLAVE
ACK
Figure 3. I2C Communication Examples
相关PDF资料 |
PDF描述 |
|---|---|
| VI-2W0-MW | CONVERTER MOD DC/DC 5V 100W |
| VI-2V4-MX-B1 | CONVERTER MOD DC/DC 48V 75W |
| VI-2VM-MX-B1 | CONVERTER MOD DC/DC 10V 75W |
| DS1841X | IC RES LOG NV I2C DGTL 10TDFN |
| VI-2V2-MX-B1 | CONVERTER MOD DC/DC 15V 75W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS3504FP000 | 制造商:Thomas & Betts 功能描述:30A,PLG,3P4W,MG,404,000,3P480V,FC |
| DS3504FP00K | 制造商:Thomas & Betts 功能描述:30A,CON,3P4W,MG,504,00K,3P480V,FC |
| DS3504FP00K/JG63 | 制造商:Thomas & Betts 功能描述:30A,CON,3P4W,504,00K,3P480V,FC,JG63 |
| DS3504FP00K/JG64 | 制造商:Thomas & Betts 功能描述:30A,CON,3P4W,MG,504,3P480V,JG64 |
| DS3504FP00K/JG66 | 制造商:Thomas & Betts 功能描述:30A,CON,3P4W,MG,504,3P480V,JG66 |
发布紧急采购，3分钟左右您将得到回复。