- 您现在的位置：买卖IC网 > PDF目录1916 > DS5002FMN-16 (Maxim Integrated Products)IC MPU SECURE 16MHZ IND 80-TQFP PDF资料下载
参数资料
| 型号： | DS5002FMN-16 |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 7/25页 |
| 文件大小： | 0K |
| 描述： | IC MPU SECURE 16MHZ IND 80-TQFP |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 66 |
| 系列： | DS500x |
| 核心处理器： | 8051 |
| 芯体尺寸： | 8-位 |
| 速度： | 16MHz |
| 连通性： | EBI/EMI，SIO，UART/USART |
| 外围设备： | 电源故障复位，WDT |
| 输入/输出数： | 32 |
| 程序存储器类型： | SRAM |
| RAM 容量： | 128 x 8 |
| 电压 - 电源 (Vcc/Vdd)： | 4.5 V ~ 5.5 V |
| 振荡器型： | 外部 |
| 工作温度： | -40°C ~ 85°C |
| 封装/外壳： | 80-BQFP |
| 包装： | 托盘 |
DS5002FP Secure Microprocessor Chip
15 of 25
SECURE OPERATION OVERVIEW
The DS5002FP incorporates encryption of the activity on its byte-wide address/data bus to prevent unauthorized
access to the program and data information contained in the NV RAM. Loading an application program in this
manner is performed by the bootstrap loader using the general sequence described below:
1) Clear security lock.
2) Set memory map configuration as for DS5001FP
3) Load application software
4) Set security lock
5) Exit loader
Loading of application software into the program/data RAM is performed while the DS5002FP is in its bootstrap
load mode. Loading is only possible when the security lock is clear. If the security lock has previously set, then it
must be cleared by issuing the “Z” command from the bootstrap loader. Resetting the security lock instantly clears
the previous key word and the contents of the Vector RAM. In addition, the bootstrap ROM writes 0’s into the first
32k of external RAM.
The user’s application software is loaded into external CMOS SRAM by the “L” command in “scrambled” form
through on-chip encryptor circuits. Each external RAM address is an encrypted representation of an on-chip logical
address. Thus, the sequential instructions of an ordinary program or data table are stored nonsequentially in RAM
memory. The contents of the program/data RAM are also encrypted. Each byte in RAM is encrypted by a key- and
address-dependent encryptor circuit such that identical bytes are stored as different values in different memory
locations.
The encryption of the program/data RAM is dependent on an on-chip 64-bit key word. The key is loaded by the
ROM firmware just prior to the time that the application software is loaded, and is retained as nonvolatile
information in the absence of VCC by the lithium backup circuits. After loading is complete, the key is protected by
setting the on-chip security lock, which is also retained as nonvolatile information in the absence of VCC. Any
attempt to tamper with the key word and thereby gain access to the true program/data RAM contents results in the
erasure of the key word as well as the RAM contents.
During execution of the application software, logical addresses on the DS5002FP that are generated from the
program counter or data pointer registers are encrypted before they are presented on the byte-wide address bus.
Op codes and data are read back and decrypted before they are operated on by the CPU. Similarly, data values
written to the external nonvolatile RAM storage during program execution are encrypted before they are presented
on the byte-wide data bus during the write operation. This encryption/decryption process is performed in real time
such that no execution time is lost as compared to the non-encrypted DS5001FP or 8051 running at the same
clock rate. As a result, operation of the encryptor circuitry is transparent to the application software.
Unlike the DS5000FP, the DS5002FP chip’s security feature is always enabled.
SECURITY CIRCUITRY
The on-chip functions associated with the DS5002FP’s software security feature are depicted in Figure 9.
Encryption logic consists of an address encryptor and a data encryptor. Although each encryptor uses its own
algorithm for encrypting data, both depend on the 64-bit key word which is contained in the Encryption Key
registers. Both the encryptors operate during loading of the application software and also during its execution.
相关PDF资料 |
PDF描述 |
|---|---|
| DS72612RP80FPV | IC SUPERH MPU ROMLESS 176LQFP |
| DS8007-ENG+ | IC SMRT CARD READER INTFC 48LQFP |
| DS8007A-EAG+ | IC INTERFACE SMART CARD 48-LQFP |
| DS8023-RRX+ | IC INTERFACE SMART CARD 28-SOIC |
| DS80C310-ECG | IC MCU HI SPEED 25MHZ 44-TQFP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS5002FMN-16+ | 功能描述:微处理器 - MPU Soft MCU Chip RoHS:否 制造商:Atmel 处理器系列:SAMA5D31 核心:ARM Cortex A5 数据总线宽度:32 bit 最大时钟频率:536 MHz 程序存储器大小:32 KB 数据 RAM 大小:128 KB 接口类型:CAN, Ethernet, LIN, SPI,TWI, UART, USB 工作电源电压:1.8 V to 3.3 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:FBGA-324 |
| DS5002FP | 制造商:DALLAS 制造商全称:Dallas Semiconductor 功能描述:Secure Microprocessor Chip |
| DS5002FP/C01 | 功能描述:微处理器 - MPU RoHS:否 制造商:Atmel 处理器系列:SAMA5D31 核心:ARM Cortex A5 数据总线宽度:32 bit 最大时钟频率:536 MHz 程序存储器大小:32 KB 数据 RAM 大小:128 KB 接口类型:CAN, Ethernet, LIN, SPI,TWI, UART, USB 工作电源电压:1.8 V to 3.3 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:FBGA-324 |
| DS5002FP_06 | 制造商:DALLAS 制造商全称:Dallas Semiconductor 功能描述:Secure Microprocessor Chip |
| DS5002FP_1 | 制造商:DALLAS 制造商全称:Dallas Semiconductor 功能描述:Secure Microprocessor Chip |
发布紧急采购，3分钟左右您将得到回复。