参数资料
型号: DSPIC33FJ32GP202-E/SS
厂商: Microchip Technology
文件页数: 152/176页
文件大小: 0K
描述: IC DSC 16BIT 32KB FLASH 28SSOP
标准包装: 47
系列: dsPIC™ 33F
核心处理器: dsPIC
芯体尺寸: 16-位
速度: 40 MIP
连通性: I²C,IrDA,LIN,SPI,UART/USART
外围设备: 欠压检测/复位,POR,PWM,WDT
输入/输出数: 21
程序存储器容量: 32KB(32K x 8)
程序存储器类型: 闪存
RAM 容量: 2K x 8
电压 - 电源 (Vcc/Vdd): 3 V ~ 3.6 V
数据转换器: A/D 10x10b/12b
振荡器型: 内部
工作温度: -40°C ~ 125°C
封装/外壳: 28-SSOP(0.209",5.30mm 宽)
包装: 管件
76
AT89C5131
4136C–USB–04/05
Each of the interrupt sources can be individually enabled or disabled by setting or clear-
ing a bit in the Interrupt Enable register (Table 62). This register also contains a global
disable bit, which must be cleared to disable all interrupts at once.
Each interrupt source can also be individually programmed to one out of four priority lev-
els by setting or clearing a bit in the Interrupt Priority register (Table 63.) and in the
Interrupt Priority High register (Table 64). Table 61. shows the bit values and priority lev-
els associated with each combination.
Registers
The PCA interrupt vector is located at address 0033H, the SPI interrupt vector is located
at address 004BH and Keyboard interrupt vector is located at address 003BH. All other
vectors addresses are the same as standard C52 devices.
Table 61. Priority Level Bit Values
A low-priority interrupt can be interrupted by a high priority interrupt, but not by another
low-priority interrupt. A high-priority interrupt can’t be interrupted by any other interrupt
source.
If two interrupt requests of different priority levels are received simultaneously, the
request of higher priority level is serviced. If interrupt requests of the same priority level
are received simultaneously, an internal polling sequence determines which request is
serviced. Thus within each priority level there is a second priority structure determined
by the polling sequence.
IPH.x
IPL.x
Interrupt Level Priority
0
0 (Lowest)
011
102
1
3 (Highest)
相关PDF资料
PDF描述
VE-B6V-IX-S CONVERTER MOD DC/DC 5.8V 75W
PIC18F65K90-E/PT IC MCU 8BIT 32KB FLASH 64TQFP
VE-B6T-IX-S CONVERTER MOD DC/DC 6.5V 75W
PIC18F47J13T-I/PT IC MCU 8BIT 128KB FLASH 44 TQFP
PIC24FJ64GA102T-I/ML IC MCU 16BIT 64KB FLASH 28QFN
相关代理商/技术参数
参数描述
dsPIC33FJ32GP202-I/MM 功能描述:数字信号处理器和控制器 - DSP, DSC 16B DSC 28LD 32KB Flash40 RoHS:否 制造商:Microchip Technology 核心:dsPIC 数据总线宽度:16 bit 程序存储器大小:16 KB 数据 RAM 大小:2 KB 最大时钟频率:40 MHz 可编程输入/输出端数量:35 定时器数量:3 设备每秒兆指令数:50 MIPs 工作电源电压:3.3 V 最大工作温度:+ 85 C 封装 / 箱体:TQFP-44 安装风格:SMD/SMT
dsPIC33FJ32GP202-I/SO 功能描述:数字信号处理器和控制器 - DSP, DSC 16B DSC 28LD 32KB Flash40 RoHS:否 制造商:Microchip Technology 核心:dsPIC 数据总线宽度:16 bit 程序存储器大小:16 KB 数据 RAM 大小:2 KB 最大时钟频率:40 MHz 可编程输入/输出端数量:35 定时器数量:3 设备每秒兆指令数:50 MIPs 工作电源电压:3.3 V 最大工作温度:+ 85 C 封装 / 箱体:TQFP-44 安装风格:SMD/SMT
dsPIC33FJ32GP202-I/SP 功能描述:数字信号处理器和控制器 - DSP, DSC 16B DSC 28LD 32KB Flash40 RoHS:否 制造商:Microchip Technology 核心:dsPIC 数据总线宽度:16 bit 程序存储器大小:16 KB 数据 RAM 大小:2 KB 最大时钟频率:40 MHz 可编程输入/输出端数量:35 定时器数量:3 设备每秒兆指令数:50 MIPs 工作电源电压:3.3 V 最大工作温度:+ 85 C 封装 / 箱体:TQFP-44 安装风格:SMD/SMT
dsPIC33FJ32GP202-I/SS 功能描述:数字信号处理器和控制器 - DSP, DSC 16 bit DSC 40MIPS 32KB Flash RoHS:否 制造商:Microchip Technology 核心:dsPIC 数据总线宽度:16 bit 程序存储器大小:16 KB 数据 RAM 大小:2 KB 最大时钟频率:40 MHz 可编程输入/输出端数量:35 定时器数量:3 设备每秒兆指令数:50 MIPs 工作电源电压:3.3 V 最大工作温度:+ 85 C 封装 / 箱体:TQFP-44 安装风格:SMD/SMT
DSPIC33FJ32GP202T-E/MM 制造商:Microchip Technology Inc 功能描述: